Generac Protector 30kW Automatic Standby Diesel Generator (120/208V 3-Phase)
Features
- CODE READY – compatibility with various codes, with external vent and fill, a UL/CUL 142-listed, double-walled base tank, a UL/CUL 2200-listed generator, and a wide range of code-driven accessories.
- 5 YEAR LIMITED WARRANTY
- Generous stub-up area for easy connections with dual-rated lugs to accept either copper or aluminum conductors with removable kick-plate for stub-up access
- Will utilize the standard RTS or RXS switches
- QUIET-TEST™ – weekly self-test mode that runs at a lower RPM, is quieter, and consumes less fuel.
- Same robust engines used on the Generac Industrial Power products
- Isochronous governor: Electronic governor control for tight and precise load response, and voltage/frequency regulation
- Removable doors for easy service and fuel fill access
- EVOLUTION™ CONTROLLER – allows for easy monitoring and management of generator functions.
- External viewing window for easy indication of generator status and breaker position
- Mobile Link Connectivity - Standard with all Protector Series generators. Mobile Link allows you to monitor the status of your generator from anywhere in the world using a smartphone, tablet or PC.
- Non-bid/Spec
Manufacturer Resources
Product Specs
- Assembled Depth:
- 95.000000 in
- Assembled Height:
- 59.000000 in
- Assembled Weight:
- 1857.000000 lbs
- Assembled Width:
- 35.000000 in
- Manufacturer Warranty:
- 5 Year Limited Warranty
- Department:
- Electrical
- Product Group:
- Power Equipment
- Product Subgroup:
- Protector Series Generator
Generac RD03022GDAE – Frequently Asked Questions
1) What voltage and phase does the Generac RD03022GDAE 30kW diesel standby generator put out?
The RD03022GDAE is a 30kW diesel standby unit configured for 120/208V three phase. That makes it a fit for commercial services with a 208Y/120 panel, not for a single phase 120/240 residential or light commercial service. If the building service is single phase, this is the wrong configuration and you want a single phase Protector model instead.
2) How much pad space and how much concrete do I need for a Generac Protector 30kW diesel generator?
Size the pad off the enclosure footprint: 95 inches deep by 35 inches wide, 59 inches tall, and 1,857 pounds assembled. That weight is on a base tank unit, so the pad and any rigging or crane pick need to be engineered for it, and you need clearance on the door sides because the doors are removable for service and fuel fill access.
3) Does this Generac diesel generator come with a fuel tank, or do I supply one?
Fuel is on board. The Protector 30kW diesel ships on a double walled base tank that is UL/CUL 142 listed, with external vent and fill, so you are not running a separate day tank or a remote supply. The generator itself is UL/CUL 2200 listed.
4) Which automatic transfer switch works with the Generac Protector 30kW diesel?
It runs on Generac's standard RTS or RXS transfer switches, so you do not need a special switch line for this unit. Match the switch amperage to the service and the 120/208V three phase configuration when you spec it.
5) Can I land aluminum conductors on this generator, or does it require copper?
Either one. The lugs are dual rated for copper or aluminum conductors, and there is a generous stub up area with a removable kick plate so you can get conduit up into the enclosure without fighting for room.
6) Will a Generac Protector diesel pass a code-driven install for a healthcare or municipal facility?
It is built for code work: UL/CUL 2200 listed genset, UL/CUL 142 listed double walled base tank, external vent and fill, and a range of code-driven accessories available. Note it is a non-bid/spec unit, so if your project documents require a bid-spec industrial package, this is the wrong line to quote.
7) Can my maintenance team monitor this generator remotely?
Mobile Link connectivity is standard on the Protector Series, so status can be checked from a phone, tablet, or PC. On site, the Evolution controller handles monitoring and management of generator functions, and an external viewing window lets you read generator status and breaker position without opening the enclosure.
8) How noisy is the weekly exercise cycle on a Generac Protector standby generator?
The weekly self test uses Quiet-Test, which runs the engine at a reduced RPM. It is quieter than a full speed exercise and burns less fuel, which matters when the set sits behind an occupied building or near a property line.
9) Will this generator hold frequency when a big motor load hits it?
It uses an isochronous electronic governor, which holds tight load response and regulates voltage and frequency rather than drooping under step loads. The engine is the same platform Generac uses on its Industrial Power products.
How fast can I get the Generac RD03022GDAE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Generac RD03022GDAE come with a warranty?
Absolutely. The Generac RD03022GDAE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Generac RD03022GDAE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Generac RD03022GDAE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.