Greenlee 62PTS58 Nail Eater Sh...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.33
Greenlee 62PTS58 Nail Eater Shorty Auger Bit, Heat-Treated Steel

Greenlee 62PTS58 Nail Eater Shorty Auger Bit, Heat-Treated Steel

(No reviews yet) Write a Review

Model: 62PTS-5/8

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Greenlee 62PTS58 Nail Eater® Shorty Auger Bit, Heat-Treated Steel

The Greenlee Nail Eater® Shorty Bit is an auger-style boring bit engineered from super tough, heat-treated steel to cut straight through embedded nails without failing. This shorty family is available in sizes ranging from 5/8" x 7" up to 13/16" x 18", giving electricians and installers the reach and diameter needed for a wide range of rough-in and remodel wiring tasks. Every size in the line shares the same patented cutting geometry, self-feeding screw point, and hexagonal shank design that make the Nail Eater® series a go-to choice for demanding jobsite boring work. The compact "shorty" profile lets pros work in tight framing cavities while still boring through multiple abutting 2 x 4 studs in a single pass.

Key Features

  • Size Range: Available from 5/8" x 7" up to 13/16" x 18" to match different boring depths and diameters.
  • Durable Construction: Made of super tough, heat-treated steel that cuts through nails and delivers longer bit life across every size.
  • Extended Cutting Life: Improved cutting edge provides 30% longer life span than earlier Nail Eater® designs.
  • Self-Feeding Point: Self-feeding screw point draws the bit through wood for faster, more controlled boring.
  • Patented Cutting Design: New patented profile improves cutting performance and produces cleaner holes.
  • Reduced Cutting Loads: Unique patented cutting angle enables smoother starts and reduced cutting loads on the drill.
  • Shorty Design: Compact length is ideal for working in tight places while still boring through multiple abutting 2 x 4 studs.
  • Hexagonal Shank: 7/16 IN (11.100 MM) hexagonal shank for secure chucking in compatible drills.

Technical Specifications

  • Shank Diameter: 7/16 IN (11.100 MM)
  • Shank Type: Hexagonal
  • Material: Heat Treated Steel
  • Available Sizes: 5/8 x 7", 13/16 x 18"
  • Electric Drill Required: 61 PTS - 5/8 Through 61 PTS -1, Minimum 3/8 IN Drill, All Big Shank, 1/2 IN Drill
  • Country of Origin: China

Typical Applications

  • Electrical Rough-In and Wire Fishing
  • Boring Through Framing Members Containing Nails
  • Tight-Access Wood Framing Applications
  • Boring Through Multiple Abutting 2 x 4 Studs
  • Remodel and New Construction Wiring

Why Greenlee?

Greenlee builds the Nail Eater® line from heat-treated steel and patented cutting geometry specifically to survive nail strikes that would ruin a standard auger bit. Across the full size range from 5/8" x 7" to 13/16" x 18", each Shorty Bit combines a self-feeding point, reduced cutting loads, and a 30% longer life span cutting edge to keep electrical contractors productive on demanding rough-in jobs.

Manufacturer Resources

Product Specs

list_batch:
GREE-20260923
Product Type:
Wood Boring Bit
Configuration:
Hexagonal Shank
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Material:
Heat Treated Steel
Shank Type:
Hexagonal
Product Group:
Power Tools & Accessories

Greenlee 62PTS-5/8 – Frequently Asked Questions

1) Will the Greenlee Nail Eater Shorty bit fit my 3/8 inch drill chuck?
The shank is a 7/16 inch (11.100 mm) hex, so it needs a chuck that takes 7/16 hex or an impact-style holder. Greenlee's own drill guidance for the Nail Eater line calls for a minimum 3/8 inch drill on the 61 PTS 5/8 through 61 PTS 1 sizes, and a 1/2 inch drill for all big shank bits. On a cordless, more torque is better since the screw point self-feeds and pulls hard in dense framing.
2) What sizes does the Greenlee Nail Eater Shorty auger bit come in?
Two: 5/8 x 7 inches (MPN 62PTS-5/8) and 13/16 x 18 inches (MPN 66PT-13/16). Trade sizes run 5/8 inch to 13/16 inch in diameter. Pick the 5/8 x 7 for tight cavities and single-member boring, the 13/16 x 18 when you need both a bigger hole and the reach to cross several studs or joists in one pass.
3) Can this bit actually drill through a nail without wrecking the cutting edge?
That's what the Nail Eater line is built for. The bit is made of super tough, heat-treated steel so it cuts straight through embedded nails rather than chipping or stalling out, and the current cutting edge is rated for 30 percent longer life than earlier Nail Eater designs. It's the right choice for remodel work where you can't see what's buried in the framing.
4) Should I use a shorty auger bit or a full-length one for electrical rough-in?
Go shorty when you're boring between tight framing, inside a stud bay, or working off a short drill with limited swing room. The compact profile still bores through multiple abutting 2 x 4 studs in a single pass. A full-length auger makes more sense for long joist runs or boring from an awkward angle where you need the extra standoff. Within the Shorty family itself, the 18 inch version gives you reach without going to a separate long bit.
5) Will a 5/8 inch hole from this bit take standard NM cable?
The 5/8 inch Nail Eater Shorty bores the smaller of the two diameters offered and is the common choice for pulling romex or a few conductors through studs. If you're pulling multiple cables or larger conductors through the same bore, step up to the 13/16 inch. Keep in mind the hole still has to leave enough stud material and respect nail plate requirements under your local code.
6) Does the Greenlee Nail Eater bit pull itself into the wood or do I have to push?
It self-feeds. A screw point at the tip threads into the wood and draws the bit through, so you guide it rather than lean on it. Greenlee also uses a patented cutting angle to reduce cutting loads, which makes starts smoother and keeps the drill from bogging down. On a high-torque drill, hold it firmly, since a self-feeding point can grab if you hit something hard mid-bore.
How fast can I get the Greenlee 62PTS-5/8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 62PTS-5/8 come with a warranty?
Absolutely. The Greenlee 62PTS-5/8 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 62PTS-5/8?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 62PTS-5/8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!