You may also like
Klein Tools 1611-30 Grip for Weatherproof Wire 0.53-Inch Capacity
Model: KLN-1611-30
Grip for Weatherproof Wire 0.53-Inch Capacity
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and...
Klein Tools
$501.44
$451.44
Klein Tools 1611-20 Grip for Weatherproof Wire 0.40-Inch Capacity
Model: KLN-1611-20
Grip for Weatherproof Wire 0.40-Inch Capacity
Warnings
Do not exceed rated capacity.
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and...
Klein Tools
$432.87
$382.87
Klein Tools 1656-40H Chicago® Grip with Latch 0.74-Inch Capacity
Model: KLN-1656-40H
Chicago® Grip with Latch 0.74-Inch Capacity
Features
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
Made in USA
Hot-line grips for both...
Klein Tools
$815.67
$765.67
Klein Tools KPS062-2 Pulling Grip 16-Inch L 0.62-Inch to 0.74-Inch Dia
Model: KLN-KPS062-2
Pulling Grip 16-Inch L 0.62-Inch to 0.74-Inch Dia
Warnings
Do NOT exceed maximum safe load as listed on the label attached to the product.
Do NOT use on live circuits.
Always match proper size and...
Klein Tools
$368.71
$318.71
Grip for Weatherproof Wire 0.74-Inch Capacity
1611-40 - spec sheet
Note
- Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable
Features
- Made in USA
- Weatherproof
- Works on 0.53 to 0.74-Inch (13.46 to 18.80 mm) cable diameter range
- Notches in jaw provide firm grip on insulation
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Round inside jaw contour for weatherproof coated wire
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
1611-40 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.53" to 0.7" (13.46 to 17.78 mm)
- Cable Type:
- Copper, ACSR, AAC
- Depth:
- 10.8000 in
- Height:
- 1.5840 in
- Hot Latch:
- No
- Jaw Length:
- 5.688" (14.5 cm)
- Jaw Type:
- Notched
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 7.4250 lbs
- Width:
- 4.9500 in