Hager 12L 90 Degree Offset Pul...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$213.77
$194.86
HAGER 12L - 90 Degree Offset Pull - Round, 1" Diameter, 2-3/4" Projection, 1-3/4" Clearance, CTC 12", Offset 3" 12L

Hager 12L 90 Degree Offset Pull - Round 1" Diameter with 12" CTC and 3" Offset

(No reviews yet) Write a Review

Model: 12L US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$213.77
$194.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 12L 90 Degree Offset Pull - Round 1" Diameter with 12" CTC and 3" Offset

Professional 90 Degree Offset Door Pull Solution

The Hager 12L delivers professional-grade door pull performance with a distinctive 90-degree offset design featuring 1" diameter round construction. Engineered with 12" center-to-center spacing and 3" offset projection, this pull provides 2-3/4" projection with 1-3/4" clearance for comfortable operation. Meets ANSI A156.6 for J402 Pulls certification and accommodates 1-3/4" door thickness with secure thru-bolt mounting.

Professional Features & Benefits

  • Precise Dimensional Design: 12" center-to-center spacing with 3" offset and 2-3/4" projection for optimal ergonomic positioning.
  • Round Profile Construction: 1" diameter round design provides comfortable grip and professional appearance.
  • Standard Clearance: 1-3/4" clearance with optional 2-1/2" handicap clearance available on special order (add prefix "H").
  • Secure Mounting System: Two 5/16" - 18 thru-bolts with washers ensure reliable attachment to 1-3/4" door thickness.
  • ANSI Compliance: Meets ANSI A156.6 for J402 Pulls certification for code compliance and professional standards.
  • Multiple Material Options: Available in aluminum, brass, bronze, and stainless steel construction for diverse architectural requirements.
  • Extensive Finish Selection: Ten standard finishes including US3, US4, US10, DBZ, US19, US26, US26D, US28, US32, and US32D.
  • Custom Configuration Options: 45-degree offset available (add prefix "X"), plus special order centers, sizes, and finishes for unique applications.

Technical Specifications

  • Subcategory: Door Pulls, Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager door pull products deliver professional-grade reliability with precision-engineered construction meeting ANSI A156.6 standards. Available in multiple materials including aluminum, brass, bronze, and stainless steel with extensive finish options for demanding commercial applications. Engineered for dependable performance where professional appearance and reliable operation are essential.

Manufacturer Resources

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Subcategory:
Door Pulls, Push and Pull Plates
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 12L US26D – Frequently Asked Questions

1) Will the Hager 12L offset pull fit a 1-3/4 inch door?
Yes. The 12L 90 degree offset pull is set up for 1-3/4 inch door thickness and mounts with two 5/16-18 thru-bolts and washers. Thru-bolting means you drill straight through the door face at the two hole locations rather than tapping the door, so it works on hollow metal, wood, and aluminum leaves as long as the stile is wide enough to take a 12 inch center-to-center hole pattern plus the 1 inch round bar.
2) How much hand clearance does the Hager 12L pull give, and is there an ADA-height option?
Standard clearance behind the bar is 1-3/4 inches, with 2-3/4 inch total projection off the door face. If you need more knuckle room, Hager builds the same pull with 2-1/2 inch clearance as a handicap-clearance version, ordered by adding the prefix H to the model number. That is a special order, so it has to be called out on the order, not swapped in later.
3) Does the Hager 12L pull meet ANSI standards for a commercial building?
The 12L meets ANSI A156.6 as a J402 pull. That is the door trim standard institutional and government specs normally reference for pulls, so it will answer a spec line calling for an ANSI A156.6 J402 pull on office, school, healthcare, or municipal work.
4) I need to replace a pull on a door that has an old pull plate. Will the Hager 12L cover the existing holes?
Probably not. The 12L is a bare offset pull on two thru-bolts at 12 inch centers, so it covers nothing but the two holes it uses. If the existing prep has a plate hiding old fastener holes or a scarred door face, stay with a plate: the Ives 8302 and Ives 8303 are heavy duty pull plates with thru-bolt mounting, the 8303 in 8 inch or 10 inch center-to-center, and the Delaney plates come in 3-1/2 x 15 inch and 4 x 16 inch. Match the new plate to or larger than the old one and check that the pull centers line up with the holes already in the door.
5) What is the closest equivalent to a Hager 12L offset pull from another manufacturer?
The Hager 12L is a round 1 inch diameter offset pull with 12 inch center-to-center spacing, 3 inch offset and 2-3/4 inch projection, thru-bolted with two 5/16-18 bolts through a 1-3/4 inch door. The nearest round-profile peer is the Trimco 1013, a round heavy duty pull plate with a 5.5 inch CTC pull. The difference that decides the order is the mounting format and the grip spacing: the Hager 12L is a bare offset pull on 12 inch centers, while the Trimco 1013 is a pull mounted on a plate on 5.5 inch centers. If the door already has holes drilled on 12 inch centers, the 12L drops into them and the 1013 does not.
6) I need a pull that also protects the door face where hands hit it - what should I use instead of a bare offset pull?
A bare offset pull like the Hager 12L grips only; it leaves the door face exposed. When the face needs covering as well, a pull plate puts the grip on a protective plate: the Ives 8302 is a heavy duty pull plate with through-bolt mounting, the Ives 8303 is a heavy duty pull plate offered with 8 inch or 10 inch center-to-center mounting, and the Delaney 4 inch by 16 inch pull plate and 3-1/2 inch by 15 inch pull plate cover the smaller plate sizes. Choose the plate route on high-traffic openings where the leaf itself takes the abuse; choose the 12L where the door face is already protected or the wider 12 inch grip is what the opening calls for.
7) Is a push plate a substitute for the Hager 12L?
No. The Hager 12L is a pull - a round 1 inch diameter offset grip on 12 inch centers, thru-bolted through a 1-3/4 inch door. A push plate is a flat plate with no grip, meant for the swing side of the opening, and the Delaney 3-1/2 inch by 15 inch push plate and 4 inch by 16 inch push plate are those. On a single-acting door the two are ordered together, not one instead of the other: the pull goes on the side that is pulled, the push plate on the side that is pushed. Ordering a push plate expecting a grip leaves the pull side with nothing to hold.
8) What is a shorter-grip alternative if 12 inch centers are too wide for my stile?
The Hager 12L is fixed at 12 inch center-to-center with a 3 inch offset. Where the stile or glass edge will not take that spread, the shorter-center peers are the Trimco 1010 series cast pull plate at 5 inch CTC, the Trimco 1012 cast tapered heavy duty pull plate at 5.5 inch CTC, the Trimco 1013 round heavy duty pull plate at 5.5 inch CTC, and the Trimco 1014 half-round pull plate at 6 inch CTC. All four put the grip on a plate rather than mounting bare, so confirm the plate width clears the stile before ordering.
9) What does the 90 degree offset on the Hager 12L actually do, and when would I want a straight pull instead?
On the 12L the grip bar runs parallel to the door but the mounting legs turn 90 degrees into the face, so the bar sits 3 inches off the mounting line. That puts the hand out away from the stile edge, which is what you want on a full glass or narrow stile door where a straight pull would crowd the frame or a push bar. If you just need a grip on a wide flush door and are not fighting adjacent hardware, a flat pull plate like the Ives 8302 or a Trimco 1013 round pull plate covers the door prep and the grip in one piece. Hager also offers the same pull with a 45 degree offset, ordered with the prefix X.
10) What finishes does the Hager 12L offset pull come in, and can I match stainless hardware already on the doors?
Ten finishes are offered on the 12L: 605 bright brass, 606 satin brass, 612 satin bronze, 613 oil-rubbed satin bronze, 619 satin nickel, 622 matte black, 626 satin chrome, 628 satin aluminum, 629 bright stainless, and 630 satin stainless. For a building already running stainless trim, 630 satin stainless is the usual match for brushed hardware and 629 for polished. The pull is made in aluminum, brass, bronze, and stainless steel depending on the finish family, so a 630 order is genuine stainless rather than a plated finish over another base.
11) Can I get the Hager 12L pull in a center-to-center other than 12 inches?
Stock configuration is 12 inch center-to-center with a 3 inch offset and 1 inch round bar. Other centers, sizes, and finishes are available as special order from Hager, called out on the order. If you need a shorter grip and do not want a special order, the peer pull plates run much tighter centers, for example the Trimco 1014 half-round at 6 inch CTC or the Trimco 1010 cast pull plate at 5 inch CTC.
12) Do I need to order anything else with the Hager 12L pull to finish the install?
The mounting hardware comes with it: two 5/16-18 thru-bolts and washers. What is not included is the push side. A pull like this is normally hung opposite a push plate on the same opening, and ZenSupply carries push plates from Delaney in 3-1/2 x 15 inch and 4 x 16 inch, plus Emtek Modern, Knoxville, and cast bronze Petal push and pull plate sets if you want the push side to match a decorative program.
13) Can I use the Hager 12L pull with an exit device on the same door?
Nothing on the 12L ties into a latch. It is a pure pull on two thru-bolts, so on an exit device opening it serves as the outside pull only where the device is designed for exit-only or dummy pull trim, and the device itself controls the latch. If the pull has to work with a specific value series exit device, the Detex P/PN Series pull plate is the piece built for that application rather than a general purpose offset pull. Confirm the device manufacturer's trim requirement before mixing a generic pull into an exit device opening.
14) I want a decorative pull for a lobby or residential-facing entry rather than a commercial offset pull - what are the options?
The Hager 12L is a plain round 1 inch diameter offset pull meeting ANSI A156.6 for J402 pulls, in aluminum, brass, bronze or stainless with finishes such as 605 bright brass, 613 satin bronze oil-rubbed and 622 matte black. For a decorative face instead of a plain round bar, the Emtek push and pull plate families carry styled patterns: the Knoxville series, the Modern series, and the Petal series in lost wax cast bronze. Those change the visual treatment of the trim; the 12L is the choice where the specification calls for the A156.6 J402 pull.
15) Which pull matches a door already drilled for through-bolted trim?
The Hager 12L mounts with two 5/16-18 thru-bolts and washers through a 1-3/4 inch door on 12 inch centers, so it suits an opening already prepped for through-bolted trim on that spacing. Among the peers, the Ives 8302 is a heavy duty pull plate specified with through bolt mounting, and the Ives 8303 is a heavy duty pull plate with 8 inch or 10 inch center-to-center mounting. Match the existing hole centers to the part before ordering - 12 inch, 10 inch and 8 inch preps are not interchangeable without re-drilling the leaf.
16) Does the Hager 12L give the clearance an accessible opening needs, or is there a better choice?
The Hager 12L comes standard with 1-3/4 inch clearance behind the grip, with a 2-1/2 inch handicap clearance version available on special order using the H prefix, and a 45 degree offset version using the X prefix. That special-order route is the way to get added hand clearance in the same 12 inch center-to-center 1 inch round profile. The plate-mounted peers such as the Trimco 1013 round heavy duty pull plate and the Ives 8302 heavy duty pull plate are different products with their own grip geometry, so verify clearance on the peer rather than assuming it carries over.
17) For standardizing pulls across a facility, how does the Hager 12L compare to a round pull plate?
The Hager 12L standardizes on a single round 1 inch diameter profile at 12 inch center-to-center with 3 inch offset, certified to ANSI A156.6 for J402 pulls, and is offered in ten finishes including 626 satin chrome, 630 satin stainless steel and 628 satin aluminum, so one part number carries across doors of differing finish schedules. A round pull plate such as the Trimco 1013 keeps a round grip but at 5.5 inch centers on a plate, and the Trimco 1014 half-round pull plate at 6 inch centers changes the grip cross-section. Standardizing means picking one center-to-center dimension and one grip profile and holding it across the openings.
How fast can I get the Hager 12L US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 12L US26D come with a warranty?
Absolutely. The Hager 12L US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 12L US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 12L US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!