Hager 14L Round Push/Pull Set ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$439.12
$357.31
Hager 14L Push/Pull Set - Round, 1" Diameter, 2-3/4" Projection, 1-3/4" Clearance, CTC 12", BTB Mounting Type 7

Hager 14L Round Push/Pull Set - 1" Diameter, 2-3/4" Projection, 12" CTC BTB Mounting

(No reviews yet) Write a Review

Model: 14L26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$439.12
$357.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 14L Round Push/Pull Set - 1" Diameter, 2-3/4" Projection, 12" CTC BTB Mounting

Professional Round Push/Pull Hardware Solution

The Hager 14L Push/Pull Set delivers professional-grade door hardware with a sleek 1" diameter round design and 2-3/4" projection. Engineered for 12" center-to-center spacing with BTB Mounting Type 7 concealed spanner system, this set provides 1-3/4" clearance and accommodates 1-3/4" door thickness. ANSI A156.6 J401 certified construction ensures reliable performance in commercial applications.

Professional Features & Benefits

  • Precise Dimensions: 1" diameter round pulls with 2-3/4" projection and 1-3/4" clearance for optimal ergonomics and functionality.
  • Standard CTC Spacing: 12" center-to-center mounting accommodates most commercial door applications with consistent spacing requirements.
  • Concealed Mounting System: BTB Mounting Type 7 with concealed spanner provides clean appearance while requiring minimum 3/8" holes in doors.
  • Complete Hardware Package: Includes two 1/4" diameter threaded studs, spanner collar, and spanner wrench for complete installation.
  • ANSI Certified Performance: Meets ANSI A156.6 for J401 Pulls ensuring compliance with commercial building standards.
  • Multiple Material Options: Available in aluminum, brass, bronze, and stainless steel construction for various architectural requirements.
  • Extensive Finish Selection: Eight finish options including US3, US4, US10, US26, US26D, US28, US32, and US32D for design flexibility.
  • ADA Compliance Option: 2-1/2" clearance available on special order with "H" prefix for enhanced accessibility requirements.

Technical Specifications

  • Applications: 12” (305 mm) CTC-14LCertifications EPDMeets ANSIA156.6 for J401 Pulls Clearance 1-3/4" Door Thickness 1-3/4" (45 mm) Fasteners Two 1/4" diameter threaded studs, spanner collar, and spanner wrench Finishes US3, US4, US10, US26, US26D, US28, US32, US32DHandicap 2-1/2" (64 mm) Clearance available on special order. Add prefix "H" to number (H12L, for example). Material Aluminum, Brass, Bronze, Stainless Steel Mounting Style BTBMounting Type 7 concealed spanner (required 3/8" minimum holes in doors) Notes Consists of two pulls back to back Product Description Push/Pull Set - Round Projection 2-3/4" (70 mm) Pull Clearance 1-3/4" (45 mm) Pull Diameter 1" (25 mm)
  • Certifications: EPD; Meets ANSI A156.6 for J401 Pulls
  • Clearance: 1-3/4"
  • Door Thickness: 1-3/4" (45 mm)
  • Fasteners: Two 1/4" diameter threaded studs, spanner collar, and spanner wrench
  • Finishes: US3, US4, US10, US26, US26D, US28, US32, US32D
  • Handicap: 2-1/2" (64 mm) Clearance available on special order. Add prefix "H" to number (H12L, for example).
  • Material: Aluminum, Brass, Bronze, Stainless Steel
  • Mounting Style: BTB Mounting Type 7 concealed spanner (required 3/8" minimum holes in doors)
  • Notes: Consists of two pulls back to back
  • Projection: 2-3/4" (70 mm)
  • Pull Clearance: 1-3/4" (45 mm)
  • Pull Diameter: 1" (25 mm)
  • Subcategory: Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager push/pull hardware delivers professional-grade reliability with ANSI A156.6 certified construction and multiple material options including aluminum, brass, bronze, and stainless steel. The concealed spanner mounting system and precision 1" diameter design provide both aesthetic appeal and functional durability. Engineered for demanding commercial applications where dependable performance and consistent operation are essential.

Manufacturer Resources

Installation Instructions

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Subcategory:
Push and Pull Plates
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 14L26D – Frequently Asked Questions

1) Will the Hager 14L push/pull set work on a 1-3/4 inch door?
That's exactly what the 14L is built for. Hager specs it at 1-3/4 inch (45 mm) door thickness, so a standard commercial door is the right opening. It's a back-to-back set, meaning one pull on each face with the studs passing through the door, so thickness isn't a soft recommendation here - it's what the threaded studs are cut for. On a 1-3/8 inch door the through-fastening won't land correctly.
2) What holes do I have to drill in the door for the Hager 14L back-to-back pull set?
Minimum 3/8 inch holes, two of them, at 12 inch centers. The 14L uses BTB Mounting Type 7, a concealed spanner system, and the spanner collar needs at least a 3/8 inch bore to pass through. Drill on both faces in line since the pulls mount back to back through the same holes. Get the 12 inch center-to-center dimension right before you drill - there's no slotting or adjustment in this mounting.
3) Does the Hager 14L pull set come with the mounting hardware or do I order it separately?
Everything to hang it is in the box: two 1/4 inch diameter threaded studs, the spanner collar, and the spanner wrench. That last piece matters - Type 7 concealed spanner mounting needs a spanner wrench to tighten, and Hager includes it rather than making you source one. You supply the drilled door; the set supplies the rest.
4) How much hand clearance is there behind the Hager 14L pull, and can I get more for accessibility?
The 14L gives 1-3/4 inch (45 mm) clearance between the grip and the door face, with a 2-3/4 inch (70 mm) total projection off the door on a 1 inch diameter round grip. If you need more knuckle room, Hager offers a 2-1/2 inch (64 mm) clearance version on special order by adding an "H" prefix to the model number. Specify that at order time - it isn't a field modification.
5) I only need a pull on one side and a push plate on the other. Is the Hager 14L the right part?
No. The 14L is two pulls mounted back to back, sharing the same through-studs, so both faces get an identical 1 inch round grip. If you want a flat push plate on the push side, you're looking at a different configuration - something like the Delaney 3-1/2 x 15 inch push plate or the 4 x 16 inch push plate, paired with a matching pull plate. Order the 14L only when you want a pull on both faces.
6) Will the Hager 14L drop into the holes from my existing pulls?
Only if your current pulls are on 12 inch centers with holes at least 3/8 inch. The 14L is fixed at 12 inch CTC, so shorter-center pulls won't line up. For comparison, the Trimco 1013 round heavy duty pull plate runs 5-1/2 inch CTC and the Trimco 1014 half-round runs 6 inch CTC - neither matches. Measure center to center on what's on the door before you order.
7) What is the closest equivalent to the Hager 14L round push/pull set from another manufacturer?
The Trimco 1013 is the nearest match in profile: it is a round heavy duty pull plate with a 5-1/2 inch center-to-center pull, where the Hager 14L is a round 1 inch diameter pull with 12 inch CTC spacing and 2-3/4 inch projection. Both use a round grip section, so the visual language on the door is similar; the mounting layout is not, since the 14L spans 12 inches between centers and the 1013 spans 5-1/2 inches. If the door is already drilled on 12 inch centers, the 14L holes line up and the Trimco does not.
8) I need a pull on a plate rather than a bare back-to-back pull set. What should I order instead of the Hager 14L?
The Hager 14L consists of two pulls back to back with concealed BTB Type 7 spanner mounting, so the grip mounts directly to the door face with no backplate. If the door needs a plate to cover existing prep or to take the wear, the Trimco 1010 series cast pull plate with 5 inch CTC or the Trimco 1012 cast tapered heavy duty pull plate with 5-1/2 inch CTC pull both put the grip on a plate. The Ives 8302 heavy duty pull plate with through bolt mounting is the plate option when the fastening needs to go through the door rather than into it.
9) Will the Hager 14L work on a door with an exit device on the opposite face?
The 14L is a back-to-back set of two pulls, so it occupies both faces of the door and expects a matching grip on each side. On an opening where the push side carries an exit device, the pull side needs a single-face pull instead: the Detex P/PN series pull plate is built for Detex Value Series exit devices, and the Ives 8303 heavy duty pull plate is available in 8 inch or 10 inch center-to-center mounting for a single-face pull.
10) The existing door prep is on 8 inch or 10 inch centers, not 12 inch. What pull fits that?
The Hager 14L is drilled for 12 inch center-to-center spacing, so an 8 or 10 inch prep will not receive it without new holes. The Ives 8303 heavy duty pull plate is offered in 8 inch or 10 inch center-to-center mounting and lands on that existing spacing. For shorter centers, the Trimco 1010 series is a 5 inch CTC cast pull plate and the Trimco 1014 series is a half-round pull plate with a 6 inch CTC pull.
11) Does the Hager 14L meet ANSI standards for a commercial spec?
It meets ANSI A156.6 for J401 pulls, which is the door trim standard architects write into commercial hardware schedules. J401 is the pull type designation, so if the schedule calls out a J401 pull the 14L answers it directly. Hager also publishes an EPD on it, which helps if the project is chasing sustainability credits.
12) Should I use a back-to-back round pull like the Hager 14L or a pull plate on my commercial doors?
Back-to-back pulls suit doors that get pulled from both sides - vestibules, interior pairs, glass or narrow-stile openings where you want the grip only and no plate behind it. A pull plate puts the grip on a backing plate that also shields the door face from hand traffic and covers old prep. If face protection or covering existing holes matters, look at a heavy duty plate like the Ives 8302 with through-bolt mounting or the Ives 8303 with 8 or 10 inch center-to-center. The 14L's 12 inch centers are wider than either of those, so the two aren't interchangeable in existing prep.
13) I need a round pull with a more decorative look than the Hager 14L for a lobby door. What else is there?
The 14L is a plain 1 inch round grip in a commercial finish, which reads utilitarian. For a lobby, Emtek's push and pull plate families are the decorative route - the Knoxville, the Modern, and the lost wax cast bronze Petal. Those are plate-style rather than back-to-back grips, so the door prep is different. Trimco's 1010 series cast pull plate and the 1012 cast tapered pull plate are the middle ground: heavy duty commercial construction with a cast profile.
14) Can I put a Hager 14L on a door that has an exit device?
Not as exit device trim. The 14L is a stand-alone back-to-back pull set that through-bolts the door on 12 inch centers, with nothing that ties into a device chassis. Pulls made to mount with an exit device are a different part - the Detex P/PN series pull plate, for instance, is built for Detex Value Series exit devices. Match the pull to the device line rather than adapting a back-to-back set.
15) Is a Delaney pull plate the same thing as the Hager 14L?
No. The Delaney 3-1/2 by 15 inch and 4 by 16 inch pull plates are single-face plates sized by plate dimension. The Hager 14L is a set of two round 1 inch diameter pulls mounted back to back on 12 inch centers with 2-3/4 inch projection and 1-3/4 inch clearance, using BTB Type 7 concealed spanner mounting that requires 3/8 inch minimum holes through the door. Ordering a Delaney plate against a 14L spec leaves the second face bare and the door prep does not carry over.
16) What are the options if the door is a decorative or residential-style opening rather than a commercial one?
The Hager 14L is built to ANSI A156.6 for J401 pulls in aluminum, brass, bronze, or stainless steel with a plain round profile. Where the opening calls for a decorative treatment, the Emtek Knoxville push and pull plates, Emtek Modern push and pull plates, and Emtek lost wax cast bronze Petal push and pull plates are matched push and pull plate sets with styled plate designs. They are chosen by appearance family rather than by the CTC and projection dimensions the 14L is specified on.
17) For a high traffic entrance, how does the Hager 14L compare with the heavy duty pull plates?
The Hager 14L is certified to ANSI A156.6 for J401 pulls and mounts back to back with two 1/4 inch diameter threaded studs through the door, so the load is carried through the door rather than by surface fasteners. The Ives 8302 and Ives 8303 are rated heavy duty, as are the Trimco 1010, 1012, and 1013. The Ives 8302 uses through bolt mounting, which is the same through-the-door principle as the 14L stud mounting; the difference is that the 14L gives a grip on both faces while those are single-face pull plates.
18) What finishes does the Hager 14L round push/pull set come in?
Eight, and they cover most commercial specs: 605 bright brass, 606 satin brass, 612 satin bronze, 625 bright chrome, 626 satin chrome, 628 satin aluminum, 629 bright stainless, and 630 satin stainless. Materials run aluminum, brass, bronze, and stainless steel. If you're standardizing a building on satin stainless, 630 is the one that matches most modern lever and hinge specs.
19) Is there an installation instruction sheet for Hager Type 7 concealed spanner mounting?
Yes. Hager publishes a dedicated Type 7 instruction sheet covering the concealed spanner mounting the 14L uses, and it's the one to follow for setting the spanner collar and torquing with the supplied wrench. Worth pulling up before you drill, since the 3/8 inch minimum hole and the collar seating are what make the concealed joint hold.
20) Which alternative gives a flat or tapered grip instead of the round Hager 14L profile?
The 14L uses a 1 inch diameter round pull with 2-3/4 inch projection. For a different grip shape, the Trimco 1012 is a cast tapered heavy duty pull plate with a 5-1/2 inch CTC pull, and the Trimco 1014 series is a half-round pull plate with a 6 inch CTC pull. Both change how the hand meets the grip, which matters when standardizing feel across a set of doors that already carry one profile.
How fast can I get the Hager 14L26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 14L26D come with a warranty?
Absolutely. The Hager 14L26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 14L26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 14L26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!