Hager 190S Door Protection Pla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$57.37
$35.35
Hager 190S 6” x 34” Door Protection Plate 0.050" Gauge without Bevel

Hager 190S Door Protection Plate

(No reviews yet) Write a Review

Model: 190S63432D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$57.37
$35.35
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 190S Door Protection Plate 6" x 34" x 0.050" Gauge without Bevel

Professional Door Protection Solution

The Hager 190S door protection plate provides durable metal protection for high-traffic commercial doors. This 6" x 34" plate features 0.050" gauge construction without bevel for flush mounting applications. Designed to meet ANSI A156.6 standards for metal armor plates, kickplates, and mop plates, ensuring reliable protection in demanding commercial environments.

Professional Features & Benefits

  • Standard Commercial Dimensions: 6" x 34" size provides comprehensive lower door protection for standard commercial door applications.
  • Heavy-Duty Construction: 0.050" gauge metal construction delivers exceptional durability for high-traffic commercial environments.
  • Flush Mount Design: Without bevel configuration allows for clean, flush installation against door surfaces.
  • ANSI A156.6 Compliance: Meets standards for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate applications.
  • NFPA 80 Certified: Complies with NFPA 80 Standards 6.4.5 Protection Plates for fire door applications when properly installed.
  • Flexible Installation Options: Suitable for both factory and field installation with appropriate labeling requirements per NFPA standards.

Technical Specifications

  • Subcategory: Door Pulls, Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and mounting surface compatibility.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface.
  3. Prepare door by drilling required holes as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the protection plate to door per manufacturer torque specifications.
  5. Verify proper alignment and flush mounting for optimal appearance and function.
  6. Test installation to ensure secure attachment and proper protection coverage. Refer to manufacturer documentation for complete installation details and NFPA compliance requirements.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager door protection plates deliver professional-grade reliability with heavy-duty 0.050" gauge metal construction designed for demanding commercial applications. ANSI A156.6 and NFPA 80 compliance ensures code-compliant installation for fire door and general commercial door protection. Engineered for high-traffic environments where dependable door protection is essential.

Manufacturer Resources

Product Template

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Flush Pulls
Subcategory:
Door Pulls, Push and Pull Plates
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 190S63432D – Frequently Asked Questions

1) Can I put a Hager 190S kick plate on a labeled fire door?
Yes. The 190S complies with NFPA 80 Section 6.4.5 for protection plates on fire doors when it is installed properly, and it can go on either at the factory or in the field provided the labeling requirements in that standard are followed. That is the clause your AHJ will look at on a labeled opening.
2) Is 0.050 gauge thick enough for a hospital or school corridor door?
0.050 inch is the heavy commercial thickness for armor, kick and mop plates, and it is what the 190S is made in. It takes cart strikes and foot traffic without oil-canning the way thinner decorative stock does. For a corridor that sees bed or food service carts, run the 8 inch height rather than the 6.
3) What does without bevel mean on a Hager 190S plate, and when would I want a beveled edge instead?
Without bevel means all four edges are left square, so the plate sits flat and flush against the door face. Beveled plates have the edges dressed down so a mop, a cart wheel or a hand is less likely to catch the corner. The 190S is the square edge version, which is the one to use where the plate needs a clean flush line against the door surface.
4) Which ANSI function numbers does the Hager 190S kick plate satisfy?
It is built to ANSI A156.6 and covers three of the plate types under it: J101 metal armor plate, J102 metal kickplate, and J103 metal mop plate. If your hardware schedule calls out any of those three designations, the 190S answers the spec.
5) What finishes does the Hager 190S come in, and which one matches my existing stainless door hardware?
Five BHMA finishes: 605 bright brass, 606 satin brass, 628 satin aluminum, 629 bright stainless steel, and 630 satin stainless steel. For a building already running brushed stainless levers and push plates, 630 satin stainless is the match. 628 satin aluminum is the usual pick alongside clear anodized aluminum storefront doors. All five are offered in both the 6 inch and 8 inch heights, so you can standardize a finish across a whole facility and vary the height by opening.
6) Is a Trimco 1110 flush pull an alternative to a Hager 190S kick plate?
No, and it is a common mix up. The Trimco 1110 Series is a manual flush pull, a recessed pull you grab to move the door. The Hager 190S is a flat protection plate that shields the door face from damage and has no pull function at all. If the door needs both, they are two separate line items.
7) Do I need to drill the door to install a Hager 190S protection plate?
Yes, this is a screw applied plate, not adhesive. Hager supplies a template for marking hole locations, and the door is drilled for the mounting hardware before the plate is secured and checked for flush alignment. On a labeled fire door, keep the field installation within what NFPA 80 6.4.5 permits for labeling.
How fast can I get the Hager 190S63432D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 190S63432D come with a warranty?
Absolutely. The Hager 190S63432D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 190S63432D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 190S63432D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!