Hager 21E Round Push/Pull Set ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$293.64
$289.41
Hager 21E - 90 Degree Push/Pull Set - Round, 3/4" Base Diameter, 2-1/2" Projection, 1-3/4" Clearance, 2-1/2" Offset, 6" CTC, Satin Stainless Steel Finish

Hager 21E Round Push/Pull Set with 3/4" Base Diameter and 2-1/2" Projection

(No reviews yet) Write a Review

Model: 21E BTB3 US32D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$293.64
$289.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 21E Round Push/Pull Set with 3/4" Base Diameter and 2-1/2" Projection

Professional Back-to-Back Door Pull Solution

The Hager 21E push/pull set delivers commercial-grade door hardware with a round design featuring 3/4" base diameter and 2-1/2" projection. This back-to-back pull set accommodates 1-3/4" door thickness with 6" center-to-center mounting and 2-1/2" offset configuration. Constructed from durable stainless steel with satin stainless steel finish (US32D) and includes complete mounting hardware with spanner collar system.

Professional Features & Benefits

  • Precise Dimensions: 3/4" base diameter with 2-1/2" projection and 1-3/4" clearance for optimal ergonomic performance and door compatibility.
  • Back-to-Back Configuration: Complete pull set consists of two pulls designed for through-door mounting with 6" center-to-center spacing.
  • Stainless Steel Construction: Durable stainless steel material with satin stainless steel finish (US32D) provides long-lasting performance and corrosion resistance.
  • Concealed Mounting System: Type 7 concealed spanner mounting with included spanner collar and wrench ensures secure installation with clean appearance.
  • Complete Hardware Package: Supplied with two 1/4" diameter threaded studs, spanner collar, and spanner wrench for professional installation.
  • Offset Design Options: Available with 45° offset configuration and standard 2-1/2" offset for versatile application requirements.
  • ANSI Compliance: Meets ANSI A156.6 for J402 Pulls ensuring code compliance and professional standards.

Technical Specifications

  • ANSI/BHMA: Meets ANSI A156.6 for J402 Pulls
  • Base Diameter: 3/4"
  • Clearance: 1-3/4"
  • Commercial/Residential: Commercial
  • Door Thickness: 1-3/4" (45 mm)
  • Fasteners: Two 1/4" diameter threaded studs, spanner collar, and spanner wrench
  • Finishes: US32D;
  • Hang Type: Offset Hung
  • Material: Stainless Steel
  • Mounting Style: BTB Mounting Type 7 concealed spanner (required 3/8" minimum holes in door)
  • Notes: Available with 45° offset
  • Offset: 2-12"
  • Projection: 2-1/2" (64 mm)
  • Pull CTC: 6" (152 mm)
  • Subcategory: Door Pulls, Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including 1-3/4" door thickness and minimum 3/8" diameter holes for concealed spanner mounting.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately with 6" center-to-center spacing and proper offset positioning.
  3. Prepare door by drilling required holes per manufacturer specifications for Type 7 concealed spanner mounting system.
  4. Install threaded studs through door and secure pulls using provided spanner collar and spanner wrench per manufacturer torque specifications.
  5. Adjust pull alignment for proper positioning and verify secure mounting with smooth operation.
  6. Test pull operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager door pull products deliver professional-grade reliability with stainless steel construction and ANSI A156.6 compliance for demanding commercial applications. The concealed spanner mounting system and complete hardware package ensure secure installation with lasting performance. Engineered for commercial environments where dependable door hardware and clean aesthetics are essential.

Manufacturer Resources

Installation Instructions

Product Specs

Subcategory:
Door Pulls, Push and Pull Plates
Fasteners:
Two 1/4" diameter threaded studs, spanner collar, and spanner wrench
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push/Pull Sets
ANSI/BHMA:
Meets ANSI A156.6 for J402 Pulls
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Product Model:
21L
Product Substrate:
Stainless Steel
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 21E BTB3 US32D – Frequently Asked Questions

1) Will the Hager 21E back-to-back pull set work on a 1-3/4 inch door?
Yes, 1-3/4 inches (45 mm) is the door thickness the 21E is built around. It is a back-to-back set, so the two pulls mount through the door on a pair of 1/4 inch threaded studs and clamp against each other. That through-bolted arrangement is why the thickness matters: the stud length is sized to that door. On a thinner or thicker leaf the studs will not land correctly.
2) What door prep do I need to drill for the Hager 21E concealed spanner mounting?
Type 7 concealed spanner mounting needs a minimum 3/8 inch diameter hole through the door at each mounting point, and the two holes are 6 inches (152 mm) center to center. Drill both, run the threaded studs through, then tighten the spanner collar with the supplied spanner wrench. Hager publishes Type 7 installation instructions at https://zensupply.com/content/pdf/hager/17370091-Rev01-Type_7.pdf.
3) Do I need to buy mounting hardware separately for the Hager 21E pull set?
No. The set ships with two 1/4 inch diameter threaded studs, the spanner collar, and the spanner wrench to tighten it. The spanner wrench matters, because the collar cannot be driven with a standard screwdriver or hex key, and that tool is the piece most often missing when a pull gets pulled off a crate on site.
4) Does the Hager 21E pull set meet a commercial hardware standard for a spec job?
It meets ANSI A156.6 for J402 pulls, which is the door trim standard the architect's hardware schedule usually calls out for pull function. Hager lists it as commercial grade, and the construction is stainless steel with a US32D satin stainless finish. That combination is what gets it past a submittal review on an institutional or government job.
5) Is one Hager 21E order a single pull or the pair for both sides of the door?
It is a set of two. The 21E BTB3 is a back-to-back configuration, meaning one pull on each face of the door sharing the same pair of studs through the leaf. One order covers the whole opening, not one side of it, so you do not double the quantity per door.
6) How much hand clearance does the Hager 21E round pull give behind the grip?
1-3/4 inches of clearance between the grip and the door face, with a total projection of 2-1/2 inches (64 mm) off the door. The grip itself is 3/4 inch round bar stock. That 1-3/4 inch gap is what a gloved hand needs, and it is worth checking against anything mounted nearby on the door, like a lock trim or a card reader.
7) Will the satin stainless 21E pulls match the other stainless hardware in my building?
The finish is US32D, satin stainless steel, on a stainless steel substrate. US32D is the standard brushed stainless finish across commercial door hardware, so it lines up with the satin stainless push plates, hinges, and lock trim most commercial openings already carry. If your existing doors are bright polished stainless (US32) rather than satin, the 21E will read noticeably duller beside them.
8) Can I use the Hager 21E on a glass door or an aluminum storefront?
Only if the leaf is 1-3/4 inches thick and can take a 3/8 inch minimum through hole at each of two points 6 inches apart. The 21E is a through-bolted back-to-back set with no surface-mount option, so it needs a door that can be drilled straight through. Tempered glass that was not factory-prepped with those holes cannot be field drilled, and a thinner aluminum stile will not match the stud length.
How fast can I get the Hager 21E BTB3 US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 21E BTB3 US32D come with a warranty?
Absolutely. The Hager 21E BTB3 US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 21E BTB3 US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 21E BTB3 US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!