Hager 232W Convex Wall Stop wi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.89
Convex Wall Stop, Concealed Mounting, Rubber Stop, Wrought, 2-7/16" Diameter, 1" Projection

Hager 232W Convex Wall Stop with Concealed Mounting and Rubber Bumper

(No reviews yet) Write a Review

Model: 232W US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.89
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 232W Convex Wall Stop with Concealed Mounting and Rubber Bumper

Professional Concealed-Mount Door Protection Solution

The Hager 232W Convex Wall Stop delivers professional door protection with concealed tamper-proof mounting and a 2-7/16" diameter design. Featuring 1" projection and wrought brass construction, this wall stop meets ANSI A156.16 certification standards for commercial applications. The concealed mounting system provides tamper resistance while maintaining clean aesthetics in professional environments.

Professional Features & Benefits

  • Concealed Tamper-Proof Mounting: Secure installation system prevents unauthorized removal while maintaining clean appearance in high-traffic areas.
  • Optimal Dimensions: 2-7/16" diameter with 1" projection provides effective door protection without excessive wall intrusion.
  • Premium Construction: Wrought brass, bronze, and stainless steel material options deliver exceptional durability for commercial applications.
  • Easy Installation Access: Simple screwdriver access through small hole in bumper allows for straightforward installation and service.
  • ANSI Certified Performance: Meets ANSI A156.16 certification for L02251 ensuring compliance with commercial building standards.
  • Comprehensive Finish Options: Available in US3, US4, US10, US10B, US15, US15A, US19, US26, US26D, 32, and 32D finishes for architectural coordination.
  • Complete Hardware Package: Includes one #10 1-1/2" PPHWS with plastic and toggle anchor for immediate installation.
  • Optional Accessories: Compatible with accessory 230T machine screw and toggle kit (10 pack) for specialized mounting requirements.

Technical Specifications

  • Certifications: Meets ANSI A156.16 for L02251
  • Commercial/Residential: Commercial
  • Diameter: 2-7/16" (75 mm)
  • Fasteners: One #10 1-1/2" PPHWS with plastic and toggle anchor
  • Finishes: US3, US4, US10, US10B, US15, US15A, US19, US26, US26D, 32, 32D
  • Material: Wrought Brass, Bronze, Stainless Steel
  • Notes: Concealed tamper proof mounting
  • Projection: 1" (25 mm)
  • Subcategory: Wall Stops & Holders

Installation & Operation

  1. Review manufacturer specifications and verify wall construction is suitable for concealed mounting hardware. Confirm adequate wall thickness and material compatibility.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on wall surface at desired height and position.
  3. Prepare wall by drilling required holes per manufacturer specifications for the included #10 1-1/2" PPHWS fastener and toggle anchor system.
  4. Install mounting hardware and secure the concealed mounting system to wall structure per manufacturer torque specifications.
  5. Position wall stop assembly and complete installation using screwdriver access through the small hole in rubber bumper for final securing.
  6. Test wall stop positioning to verify proper door clearance and protection function. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager door stops deliver professional-grade reliability with wrought brass, bronze, and stainless steel construction meeting ANSI A156.16 certification standards. The concealed tamper-proof mounting system and comprehensive finish options provide both security and architectural flexibility. Engineered for demanding commercial applications where dependable door protection and clean aesthetics are essential.

Door stop and holder designed to protect walls and doors while controlling door position in commercial and institutional openings.

Product Specs

Subcategory:
Wall Stops & Holders
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Wall
Commercial/Residential:
Commercial
Product Model:
232W
Product Projection:
1"
Product Substrate:
Brass
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 232W US26D – Frequently Asked Questions

1) Will the Hager 232W wall stop keep a lever handle off the drywall?
The 232W projects 1 inch off the wall face with a 2-7/16 inch diameter convex rubber bumper. That 1 inch is what stands between the door face and the wall, so measure the projection of your lever or knob from the door face first. If the lever sticks out more than about an inch past the door, the door will still contact the wall before the stop takes the hit, and you want a longer wall stop instead, such as the ABH RM or RMS Series, which are offered in multiple lengths.
2) Can the Hager 232W be installed on drywall, or does it need a stud?
It ships with one #10 1-1/2 inch PPHWS along with a plastic anchor and a toggle anchor, so it can go into hollow drywall between studs using the toggle, or into a solid substrate with the plastic anchor. Hit a stud where you can. Hager publishes mounting instructions for the 230 through 236 stops covering the hole prep.
3) What does concealed mounting mean on a wall stop, and can someone unscrew it?
On the 232W the mounting screw sits behind the rubber bumper rather than through an exposed rosette, so there is no visible fastener head to attack. Hager calls it concealed tamper proof mounting. For service you get at the screw with a screwdriver through a small hole in the bumper. That makes it a reasonable pick for schools, healthcare corridors, and multi-tenant hallways where exposed hardware walks off.
4) I need the door to stay open, not just stop. What should I order instead of the Hager 232W?
The Hager 232W is a stop only - it is a convex wall stop with a rubber bumper that halts the door and protects the wall, with no hold-open. For hold-open, the Ives WS20/WS20X is a manual wall holder with a hinged strike for drywall and masonry, and the Ives WS40 is an automatic wall holder with a heavy duty bumper pad. The manual holder requires someone to engage the strike; the automatic catches the door when it swings to the wall. Note the WS40 is rated light duty while the WS20 is heavy duty.
5) What is the closest heavy duty equivalent to the Hager 232W convex wall stop?
The Ives WS33/WS33X is the nearest match in function - a heavy-duty wall door stop with a replaceable rubber bumper, the same concept as the Hager 232W convex wall stop with rubber bumper and 1 inch projection. The Ives WS11/WS11X is also a heavy duty wall stop with a replaceable rubber bumper and is offered for both drywall and masonry walls. The practical difference is the bumper: the Hager 232W uses concealed tamper proof mounting with screwdriver access through a small hole in the bumper, while the Ives units are catalogued around a replaceable bumper element.
6) The wall is too far from the door for a 1 inch projection stop. What is the alternative to the Hager 232W?
The Hager 232W projects 1 inch from the wall, which only works when the door leaf reaches the wall within that distance. Where there is a gap - a baseboard, a deep trim, or a door that swings short of the wall - look at the ABH RM Series or ABH RMS Series wall door stops, both offered with multiple length options so the stop can be extended out to meet the door. Those are the ones to spec when a flush convex bumper cannot bridge the distance.
7) Is the Hager 232W rated for commercial use or is it a residential stop?
Commercial. The 232W is built to meet ANSI A156.16 for L02251, which is the standard covering auxiliary hardware like wall stops, and it is a wrought brass body rather than a stamped residential part. If the opening is a house door and the budget matters more than the certification, the Sure-Loc DS-W1 wall bumper is the residential-duty alternative.
8) What finishes does the Hager 232W convex wall stop come in for matching the rest of my hardware?
Nine orderable finishes: 605 bright brass, 606 satin brass, 612 satin bronze, 613 satin bronze oil-rubbed, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, and 630 satin stainless steel. For a building standardizing on 626 satin chrome levers or 630 stainless, the matching stop is there, so you can run one stop model across the whole floor.
9) Is the rubber bumper on the Hager 232W replaceable when it gets chewed up?
The 232W is specified as a concealed-mount stop with a rubber bumper, and the screw is reached through a hole in that bumper. If field-replaceable rubber is a requirement for your MRO program, the Ives WS11 and WS33 heavy duty wall stops are both listed with replaceable rubber bumpers.
10) What is the difference between the convex Hager 232W and a concave wall bumper?
Shape of the strike face. The Hager 232W is a convex wall stop - the rubber bumper crowns outward, so the door knob or edge contacts the high point. A concave unit such as the Delaney 2-1/4 inch concave wall bumper dishes inward, which is the profile normally used to cradle a round knob. Pick convex where the door edge or a lever makes contact, concave where a knob needs to seat into the stop.
11) Will a hole plate cover work in place of the Hager 232W wall stop?
No - the two are not substitutes. The Hager 232W is a functioning convex wall stop with a rubber bumper that takes the impact of the door. The Delaney 2-1/8 inch hole plate metal cover is a trim plate that conceals an existing hole in a surface; it has no bumper and absorbs nothing. If you are replacing an old wall stop and the new one does not cover the previous fastener hole, the hole plate is a finishing item you order alongside the stop, not instead of it.
12) Is there a lighter residential option than the Hager 232W wall stop?
Yes. The Hager 232W is specified for commercial use in wrought brass, bronze and stainless steel with ANSI A156.16 certification. For residential openings, the Sure-Loc wall bumper door stop is built for residential doors, and the Emtek 2255 is a brass wall bumper supplied with a regular rosette for decorative residential trim coordination. The Delaney 2-1/4 inch concave wall bumper is another residential-scale option, slightly smaller in diameter than the 2-7/16 inch Hager 232W and concave rather than convex.
13) Can I use a baseboard-mounted spring or rigid stop instead of the Hager 232W wall stop?
They solve the same problem differently. The Hager 232W mounts on the wall surface with concealed tamper proof fasteners and takes the door strike on a rubber bumper. The Delaney 3 inch spring door stop and the Delaney 3 inch heavy duty rigid door stop mount at the base and rely on a spring or solid post to absorb the swing. The wall stop is the choice where the door contacts high - at knob or lever height - or where a floor-level post would be a trip hazard or obstruct cleaning. The base stops are the choice where the wall behind the door is not solid enough to anchor to.
14) Which wall stop should I standardize on for a facility with both drywall and masonry walls?
The Hager 232W ships with one #10 1-1/2 inch PPHWS with plastic and toggle anchor, which addresses hollow drywall, and the 230T machine screw and toggle kit is available as an accessory for specialized mounting. If you want one part number catalogued for both substrates, the Ives WS11/WS11X and WS20/WS20X are both listed for drywall and masonry applications. Either way, confirm the anchor supplied matches the wall you are drilling before you place a facility-wide order.
15) Can I buy the toggle bolts separately for a batch of Hager wall stops?
Yes. Hager offers the 230T machine screw and toggle kit in a 10 pack as an accessory to the 232W, which is the way to go if you are mounting a run of stops into hollow drywall and want the heavier anchor on all of them rather than mixing in the plastic anchors that ship in the box.
16) What material is the Hager 232W wall stop body?
Wrought brass is the base substrate, with bronze and stainless steel also offered depending on the finish you order. That matters in a washdown or coastal environment: spec the 630 satin stainless steel version where corrosion is a concern rather than a plated brass finish.
How fast can I get the Hager 232W US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 232W US26D come with a warranty?
Absolutely. The Hager 232W US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 232W US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 232W US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!