Hager 259 Heavy-Duty Tri-Base ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$32.57
Hager 259F Tri-Base Floor Stop, Cast Brass with Rubber Bumper

Hager 259 Heavy-Duty Tri-Base Floor Stop with Cast Brass Construction and Rubber Bumper

(No reviews yet) Write a Review

Model: 259F US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$32.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager Heavy-Duty Tri-Base Floor Stop with Cast Brass Construction and Rubber Bumper

Professional Floor Stop Solution for High-Traffic Commercial Applications

The Hager 259 Heavy-Duty Tri-Base Floor Stop delivers reliable door protection with cast brass construction and grey rubber bumper for demanding commercial environments. Designed with a 2-1/2" wide by 1-9/16" deep base and accommodating 1/2" maximum door to floor clearance, this floor stop provides secure door positioning on wood or concrete floors. Available in US10B and US26D finishes with complete fastener hardware included for versatile installation requirements.

Professional Features & Benefits

  • Heavy-Duty Construction: Cast brass material with grey rubber bumper provides exceptional durability for high-traffic commercial applications.
  • Tri-Base Design: 2-1/2" wide by 1-9/16" deep base dimensions offer superior stability and holding power compared to standard floor stops.
  • Flexible Height Options: Available in 1-11/16" or 2-1/14" height configurations to accommodate various door clearance requirements.
  • Universal Floor Compatibility: Engineered for use on both wood and concrete floors with appropriate fastener hardware included.
  • Maximum Door Clearance: Accommodates up to 1/2" door to floor clearance for proper door stop engagement.
  • Complete Fastener Kit: Includes three #10 x 1-1/4" FPHWS, three plastic anchors, three 10-32 x 3/4" FPHMS, and three 10-32 lead anchors for comprehensive installation options.
  • Professional Finish Options: Available in US10B and US26D finishes to coordinate with existing door hardware.
  • High-Traffic Rating: Specifically designed for heavy-duty use in high-traffic commercial areas where reliable door control is essential.

Technical Specifications

  • Box Quantity: 5
  • Case Quantity: 50
  • Commercial/Residential: Commercial
  • Fasteners: Three #10 x 1-1/4" FPHWS, three plastic anchors, three 10-32 x 3/4" FPHMS, and three 10-32 lead anchor
  • Finishes: US10B, US26D
  • Material: Cast brass with grey rubber bumper
  • Notes: Heavy duty for use in high traffic areas
  • Size: 2-1/2" wide x 1-9/16" deep (64 mm x 40 mm)
  • Subcategory: Floor Stops & Holders

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager floor stop products deliver professional-grade reliability with cast brass construction engineered for demanding commercial applications where dependable performance is essential. The heavy-duty tri-base design with complete fastener hardware ensures secure installation and long-term durability in high-traffic environments. Trusted by professionals for consistent door control and protection in commercial settings.

Door stop and holder designed to protect walls and doors while controlling door position in commercial and institutional openings.

Manufacturer Resources

Product Template

Product Specs

Subcategory:
Floor Stops & Holders
Fasteners:
Three #10 x 1-1/4" FPHWS, three plastic anchors, three 10-32 x 3/4" FPHMS, and three 10-32 lead anchor
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Floor
Commercial/Residential:
Commercial
Product Model:
259H
Product Model:
259F
Product Size:
2-1/2" wide x 1-9/16" deep
Product Substrate:
Cast Brass
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 259F US26D – Frequently Asked Questions

1) Will the Hager 259 floor stop work with a 1/2 inch gap under my door?
Yes. The 259 tri-base floor stop is built for a maximum door-to-floor clearance of 1/2 inch, and it comes in two heights, 1-11/16 inch and 2-1/4 inch, so you pick the height that puts the rubber bumper into the face of the door rather than under it. Measure the gap at the point where the stop will sit, not at the hinge edge, since a door that has settled will read differently across the sweep.
2) Can the Hager 259 floor stop be mounted on a concrete floor, or is it wood only?
Both. The 259 ships with the fasteners for either substrate: three #10 x 1-1/4 inch flat phillips head wood screws with three plastic anchors for wood, and three 10-32 x 3/4 inch flat phillips head machine screws with three lead anchors for concrete. You drill and set the lead anchors for a concrete or masonry slab, or drive the wood screws straight into a wood floor. Three mounting points is what the tri-base gives you, so nothing extra needs to be sourced for a standard install.
3) Which height of the Hager 259 should I order, the 1-11/16 inch or the 2-1/4 inch?
Height is set by where the stop needs to contact the door and how much clearance you have underneath. The 1-11/16 inch 259 is the lower of the two and suits a tight gap; the 2-1/4 inch version gives more bumper height when the door bottom sits higher or there is undercut for carpet or an air return. Either way the stop is limited to 1/2 inch of door-to-floor clearance. Both heights come in all three finishes: 606 satin brass, 613 satin bronze oil-rubbed, and 626 satin chrome.
4) Will the Hager 259 hold a door open, or does it only stop it?
It only stops the door. The 259 is a bumper stop, cast brass with a rubber tip, that arrests the swing to protect the wall and the lever, and there is no catch or hold-open on it. If the job calls for the door to stay open, that is a different part: the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder has an adjustable door-to-floor clearance and holds the leaf, the SOSS MDH is a magnetic door holder and stop, and the Orca 22HD gooseneck is catalogued as a door holder. Ordering a bumper stop when the spec said holder is a common and avoidable return.
5) What is the closest heavy-duty brass floor stop to the Hager 259 tri-base?
The Ives FS13 heavy-duty brass floor dome stop with replaceable rubber bumper is the nearest equivalent. Both are heavy-duty brass floor-mounted stops with a rubber bumper, and both suit the high-traffic commercial openings the 259 is built for. The difference is the footprint and the bumper: the Hager 259 uses a tri-base with a 2-1/2 inch wide by 1-9/16 inch deep cast brass base, while the FS13 is a dome-profile stop whose rubber bumper is replaceable in place. If your maintenance program wants to swap bumpers rather than pull and re-anchor the stop, the FS13 is the one to look at; if you want the wider three-point base bearing on the floor, stay with the 259.
6) The door swings past where a floor stop can sit. What should I use instead of a Hager 259?
Use a gooseneck stop, which stands the strike point up off the floor and out toward the door so it catches the door leaf farther along the swing. The Orca Hardware 22HD Series goose neck floor stop with black tip functions as a door holder and fits 1-3/8 inch or 1-3/4 inch doors; the Emtek 2253 goose style door stop and the Delaney gooseneck floor door stop are the same profile from other lines. The Hager 259 is a low tri-base stop that takes up to 1/2 inch door to floor clearance, so it has to be anchored where the door edge actually passes over it. Where that anchor point lands in a doorway walking path or too far into the room, the gooseneck is the right swap.
7) Are the Deltana universal floor bumpers a substitute for the Hager 259 floor stop?
They look similar on a shelf but they are a different class of part. The Deltana UFB4505 is a round universal floor door bumper at 1-1/2 inch in solid brass, the UFBS138 is the square version at 1-3/8 inch, the UFBP4505 carries a pattern cap at 1-5/8 inch, and the UFBD3505 is a 3-1/2 inch decorative round bumper. Those are single-anchor bumpers sized in one dimension. The Hager 259 is a cast brass tri-base stop with a 2-1/2 inch wide by 1-9/16 inch deep base and a three-point fastener kit -- three #10 x 1-1/4 inch FPHWS, three plastic anchors, three 10-32 x 3/4 inch FPHMS and three 10-32 lead anchors -- specified commercial and noted for high traffic areas. For a residential or light-traffic opening the Deltana bumpers do the job; for a commercial door being driven into the stop all day, the tri-base is the heavier anchor.
8) How much floor space does the Hager 259 base take up?
The base measures 2-1/2 inches by 1-9/16 inches (64 mm x 40 mm). That footprint matters in a corridor or a tight vestibule, where a stop sitting proud of the door swing becomes a trip point and a mop hazard. Three anchor points spread across that base is what gives it holding power against a heavy door swinging into it repeatedly. If you need something smaller underfoot, a compact round bumper like the Deltana UFBS138 at 1-3/8 inches square is a different footprint entirely.
9) Is the Hager 259 floor stop heavy enough for a high traffic commercial door?
That is what it is built for. Cast brass body with a grey rubber bumper, rated by Hager as heavy duty for high traffic areas, and classified commercial rather than residential. Cast brass matters here because the failure mode on a cheap stop is the post shearing or bending where it meets the base after a few thousand slams. For institutional openings, office corridors, schools and healthcare, this is the class of stop that holds up.
10) What is the difference between the Hager 259F and 259H?
259F and 259H are the two model designations in the Hager 259 tri-base floor stop family, and they correspond to the two heights offered, 1-11/16 inch and 2-1/4 inch. Everything else carries across: cast brass construction, grey rubber bumper, the same 2-1/2 by 1-9/16 inch base, the same fastener kit, and the same three finishes. If you are matching an existing stop in a building, the height is the number to verify off the one already installed.
11) Should I use a tri-base floor stop like the Hager 259 or a low dome stop?
The choice is about how far the door swings and what is underfoot. A tri-base stop like the 259 rises to 1-11/16 or 2-1/4 inches on a 2-1/2 by 1-9/16 inch base, so it catches the face of the door well above the bottom rail and anchors at three points, which is what you want on a heavy commercial leaf. A low dome stop such as the Orca 23LP low rise or the Ives FS13 sits closer to the floor and is less of an obstruction in a walking path, but it needs the door bottom to come down near it. In carpeted corridors with a big undercut, the taller tri-base is usually the one that actually makes contact.
12) I need to replace a brass floor stop in a commercial building. What is comparable to the Hager 259?
For a like-for-like heavy duty brass floor stop, the Ives FS17 and FS13 are the closest peers we carry, both heavy duty brass dome stops with rubber bumpers, and the FS13 has a replaceable bumper if you want to renew the tip rather than the whole stop down the road. The 259 differs in form: a tri-base with three anchor points rather than a single-post dome, in cast brass with a grey rubber bumper. If the existing holes are already drilled, match the base pattern before you pick, since the tri-base will not land on a single-anchor dome hole.
13) Can the Hager 259 be used on a door that opens against a wall with no room for a wall stop?
That is exactly the case a floor stop solves. The 259 mounts to the floor in the door's swing path rather than the wall behind it, so it works where there is no wall to take a wall bumper, where the wall is glass or a partition that will not hold an anchor, or where a baseboard heater or millwork sits behind the door. Set it so the bumper meets the door face, and keep the 1/2 inch maximum door-to-floor clearance in mind when picking between the two heights.
14) What is a lower-profile alternative to the Hager 259 for a door that sits close to the floor?
The Orca Hardware 23LP Series dome floor stop is a low rise stop with a gray tip, built for exactly that condition. The Hager 259 comes in 1-11/16 inch and 2-1/4 inch heights and takes up to 1/2 inch door to floor clearance, so where the undercut is tight the low-rise dome sits closer to the slab. The Emtek 2254 floor door bumper at 1-3/8 inch by 1-1/4 inch and the Emtek 2251 half dome door stop are other low-profile shapes to compare against the opening.
15) For a facility where floor stops get tampered with or kicked loose, is there a better option than the Hager 259?
The Ives FS18S / FS18L security floor stop is the heavy-duty option built for that condition. The Hager 259 is a cast brass commercial stop anchored with three fasteners into wood or concrete and rated by Hager for high traffic areas, which handles abuse from normal door traffic. Where the concern is deliberate removal rather than wear -- corrections, behavioral health, transit, unattended public corridors -- the FS18S and FS18L are the security-specific version to spec instead.
16) How do I choose between the Hager 259 and the Ives FS17 for a commercial corridor?
Both are heavy-duty brass floor stops with a rubber bumper. The Ives FS17 is a dome stop; the Hager 259 is a tri-base with a 2-1/2 inch wide by 1-9/16 inch deep footprint, offered in 1-11/16 inch and 2-1/4 inch heights and in 606 satin brass, 613 satin bronze oil-rubbed and 626 satin chrome. Pick on two things: whether the finish matches the hinges and levers already on the corridor, and whether the mounting surface favors a three-point tri-base or a dome. If you are standardizing a whole floor, the 259 gives you a height choice at the same base; the FS17 is the dome profile to match existing dome stops.
17) What finishes does the Hager 259 floor stop come in, and will they match my existing door hardware?
Three finishes across both heights: 606 satin brass, 613 satin bronze oil-rubbed, and 626 satin chrome. If your levers and hinges are US26D satin chrome, which is the usual commercial standard, order the 626. Oil-rubbed bronze openings take the 613. Note that Hager also publishes the 259 finish range as US10B and US26D, the older US-code equivalents of 613 and 626.
18) How many Hager 259 floor stops come in a box?
Five per box and 50 per case. On a multi-family or hotel job where every unit door gets a stop, that case quantity is the one to price against, and it keeps the finish consistent across the whole floor. Each stop carries its own fastener kit for wood or concrete.
19) Is a dome stop the same thing as a tri-base floor stop?
No. A dome stop such as the Delaney dome door stop, the Emtek 2251 half dome, or the Emtek 2257 1-1/2 inch cylindrical floor bumper presents a rounded or cylindrical body on a single anchor point. The Hager 259 tri-base spreads its load across a 2-1/2 inch wide by 1-9/16 inch deep cast brass base with three fastening points and ships with both wood-screw and machine-screw anchor sets so it can go into wood or concrete. If a submittal calls for a tri-base floor stop, a dome stop is not a drop-in answer to it even though both stop the same door.
How fast can I get the Hager 259F US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 259F US26D come with a warranty?
Absolutely. The Hager 259F US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 259F US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 259F US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!