Hager 293D Constant Latching F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$218.78
$165.50
Hager 293D Constant Latching Flush Bolt, 1" by 6-3/4" Face Plate, 3/4" Bolt Throw, 3/4" Bolt Backset, 1/2" Square Bolt Head, 1-1/8" by 2-3/4" T-Strike

Hager 293D Constant Latching Flush Bolt Set with 1" x 6-3/4" Face Plate and 3/4" Bolt Throw

(No reviews yet) Write a Review

Model: 293D US3
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$218.78
$165.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 293D Constant Latching Flush Bolt Set with 1" x 6-3/4" Face Plate and 3/4" Bolt Throw

Self-Latching Top and Automatic Bottom Flush Bolts for Inactive Metal Doors

The Hager 293D Constant Latching Flush Bolt Set provides professional two-point latching for inactive metal doors with a 1" x 6-3/4" face plate, 3/4" bolt throw, and 3/4" bolt backset. This fire-rated system features stainless steel construction with steel components and includes both 292S and 293S flush bolts for complete door security. The set achieves 3-hour fire rating on metal doors up to 4' wide x 8' tall and meets ANSI A156.3 Type #25 and ANSI A156.16 Type #27 standards.

Professional Features & Benefits

  • Precise Dimensions: 1" x 6-3/4" face plate with 3/4" bolt throw and 3/4" bolt backset for standard door applications.
  • Fire-Rated Performance: 3-hour fire rating on metal doors up to 4' wide x 8' tall with A Label rating certification.
  • Automatic Operation: Inactive door remains latched until active door is opened, releasing the automatic bottom bolt for seamless operation.
  • Thermal Lock Protection: Automatically locks inactive door under high fire/heat conditions for enhanced safety.
  • Durable Construction: Stainless steel with steel components provides long-lasting performance in commercial applications.
  • Manual Override: Top bolt can be manually released by pressing plunger for emergency access when needed.
  • Complete Set Configuration: Includes one 292S and one 293S flush bolt for comprehensive two-point latching system.
  • Adjustable Design: Bolt head rods are adjustable and non-handed for versatile installation requirements.

Technical Specifications

  • ANSI/BHMA: 3-hour fire rating on metal doors up to 4' wide x 8' tall (ALabel rating) ANSIA156.3 Type #25 and ANSIA156.16 Type #27
  • Bolt Backset: 3/4" (19.5 mm)
  • Bolt Throw: 3/4" (19 mm)
  • Box Quantity: 1 Pair
  • Case Quantity: 12 Pairs
  • Certifications: 3-hour fire rating on metal doors up to 4' wide x 8' tall (ALabel rating)
  • Commercial/Residential: Commercial
  • Faceplate: 1" x 6-3/4" (25.6 mm x 171.8 mm)
  • Fasteners: Ten 8 x 1'' combination screws
  • Finishes: US10B, US32D
  • Flattened Round Bolt Head: Square bolt head 1/2" (13 mm)
  • Includes: 1 each 292S and 1 each 293S
  • Material: Stainless steel with steel components
  • Notes: Thermal lock automatically locks inactive door under high fire/heat conditions
  • Subcategory: Flush Bolt
  • T-Strike: 1-1/8" x 2-2/4" (28.6 mm x 70 mm)

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and ensure doors are non-beveled as required for this flush bolt system.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces for both top and bottom flush bolt positions.
  3. Prepare door by drilling required holes and routing as specified in manufacturer instructions for the 1" x 6-3/4" face plate installation.
  4. Install mounting hardware using the ten 8 x 1'' combination screws and secure both 292S and 293S flush bolts to door per manufacturer specifications.
  5. Adjust bolt head rods for proper alignment and verify 3/4" bolt throw operates smoothly with the 1-1/8" x 2-2/4" T-strike installation.
  6. Test device operation to verify automatic bottom bolt release when active door opens and confirm top bolt manual override function. Refer to manufacturer documentation for complete installation details and thermal lock operation.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Fire-Rated Door Assemblies

Why Choose Hager Quality?

Hager 293D flush bolt sets deliver professional-grade reliability with stainless steel construction and steel components engineered for demanding commercial applications. The 3-hour fire rating certification and ANSI compliance ensure code-compliant performance in critical fire safety applications. Designed for dependable two-point latching where automatic operation and thermal protection are essential for inactive door security.

Manufacturer Resources

Product Specs

Subcategory:
Flush Bolt
Fasteners:
Ten 8 x 1'' combination screws
Product Group:
Door Trim and Accessories
Product Subgroup:
Flush Bolts
Product Type:
Flush Bolts
ANSI/BHMA:
3-hour fire rating on metal doors up to 4' wide x 8' tall (A Label rating) ANSI A156.3 Type #25 and ANSI A156.16 Type #27
Commercial/Residential:
Commercial
T-Strike:
1-1/8" x 2-2/4"
Product Model:
293D
Product Substrate:
Stainless steel
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 293D US3 – Frequently Asked Questions

1) Do I have to open the inactive door to unlatch it with the Hager 293D?
No, that is the point of the constant latching design. The inactive leaf stays latched top and bottom until the active door is opened, which releases the automatic bottom bolt. The top bolt has a manual override: press the plunger to release it when you need the inactive leaf open on its own. If you want a set where both bolts are thrown and retracted by hand every time, the ABH 1854 Series manual flush bolt set for metal doors is that style.
2) What strike prep does the Hager 293D need in the frame and threshold?
Each bolt engages a T-strike measuring 1-1/8 by 2-2/4 inches, and the bolt projects 3/4 inch with a 3/4 inch backset from the door edge. The bolt head itself is a 1/2 inch square head. Cut the strike locations from those numbers, at the head for the top bolt and in the threshold or floor for the bottom bolt.
3) The doors are wood, not metal - what flush bolt should be used instead of the Hager 293D?
The Hager 293D is built for inactive metal doors and its fire rating is stated for metal doors up to 4 feet wide by 8 feet tall. For a pair of wood doors, the Ives FB41 automatic flush bolt set for wood doors with 3/4 inch throw is the direct alternative, and it carries a 90 minute fire rating. If only the top position is needed on wood, the Ives FB42 top automatic flush bolt for wood doors includes an auxiliary fire latch. The Adams Rite 1877 is also a wood-door flushbolt, but it is cylinder operated for paired wood doors rather than automatic, so the inactive leaf is released by key instead of by opening the active leaf.
4) What is an equivalent automatic flush bolt set to the Hager 293D for a fire-rated pair of metal doors?
The ABH 1860P/1862P automatic flush bolt pair is the closest equivalent. It is an automatic flush bolt pair rated fire rated 3-hour with thermal lock, which matches how the Hager 293D behaves: the 293D carries a 3-hour fire rating on metal doors up to 4 feet wide by 8 feet tall (A Label) and uses a thermal lock that locks the inactive door under high fire or heat conditions. Both are top-and-bottom pairs intended for the inactive leaf of a pair of doors, so either one covers the same two-point latching duty on a fire-rated metal opening. The Hager 293D set includes one 292S and one 293S bolt and comes in 605 Bright Brass and 630 Satin Stainless Steel.
5) Do I need to order left hand or right hand flush bolts for the 293D?
Handing is not a factor. The 293D bolt head rods are non-handed and adjustable, so one set covers either inactive leaf. What you do need to confirm is that the door edges are non-beveled, which this system requires.
6) What comes in a Hager 293D set, and do I need to buy anything else to install it?
One pair ships as a set: one 292S top bolt and one 293S bottom bolt, plus ten 8 x 1 inch combination screws for mounting. Cases run 12 pairs. You supply the door prep and the frame and floor strikes for the 1-1/8 by 2-2/4 inch T-strike locations.
7) What finishes does the Hager 293D flush bolt come in, and will it match my other stainless hardware?
Two finishes: 630 satin stainless steel and 605 bright brass. On a building standardized to satin chrome or satin stainless commercial trim, 630 is the one that matches. The bolts are stainless steel with steel components, so the 630 finish sits on the same substrate as the rest of the part.
8) Should I use automatic flush bolts or a removable mullion on my pair of doors?
Automatic flush bolts like the 293D keep the opening clear, latching the inactive leaf at head and threshold with a 3/4 inch throw and releasing the bottom bolt whenever the active door swings. That gives you full clear width when both leaves are open, which matters for moving equipment or beds through. A mullion takes up the middle of the opening but lets you use a simpler rim device on each leaf. On a fire-rated metal pair where clear opening width is the priority, the flush bolt route is the one that gets you there.
9) Only the bottom bolt needs replacing on a pair of metal doors - is there a single bolt alternative to buying the Hager 293D set?
The Hager 293D is sold as a pair, one 292S and one 293S, with a box quantity of one pair. When only one position is being replaced, the ABH 1858 Universal Bottom Fire Bolt is a bottom fire bolt of manual operation, and the ABH 1855S is a manual flush bolt single for metal doors with a 3/4 inch throw, which matches the 3/4 inch throw of the 293D. Both are single bolts rather than two-point sets, so the remaining position on the inactive leaf keeps whatever is already installed there.
10) What is a simpler alternative to the Hager 293D when the inactive door does not need to release automatically?
The Hager 293D is a constant latching set in which the inactive door stays latched until the active door is opened, releasing the automatic bottom bolt. Where a maintenance crew is willing to throw and retract the bolts by hand, a manual flush bolt does the same job with fewer moving parts. The ABH 1854 Series manual flush bolt set includes a fire bolt and is for metal doors. The Ives FB358 is a manual flush bolt with a 3/4 inch throw and 1/2 inch bolt diameter, matching the 3/4 inch throw of the 293D, and it is fire rated. The Ives FB457 is a manual flush bolt for metal doors with a 12 inch rod length, also fire rated.
11) Can a Delaney or Trimco 6 inch flush bolt be used in place of the Hager 293D?
They are not substitutes for the same duty. The Delaney 6 inch square end solid brass flush bolt, the Delaney 7 inch slide type mortise in flush bolt, the Trimco 3999 6 inch corner mount rounded end and the Trimco 3999SE 6 inch corner mount square end are manually operated flush bolts. The Hager 293D is a constant latching set of one 292S and one 293S in which the bottom bolt releases automatically when the active door is opened, and it carries a 3-hour fire rating on metal doors up to 4 feet wide by 8 feet tall along with ANSI A156.3 Type #25 and ANSI A156.16 Type #27. A face plate that measures close to the 293D 1 inch by 6-3/4 inch plate does not make a bolt a functional replacement for it on a fire-rated pair.
12) What should be specified instead of the Hager 293D when the inactive leaf has to be controlled by key?
The Hager 293D releases its bottom bolt automatically when the active door opens, and its top bolt is released by pressing a plunger, so there is no key control over the inactive leaf. For key control, the Adams Rite 1870 Series is a cylinder-operated flushbolt with key control, and the Adams Rite 1877 is a cylinder-operated flushbolt for paired wood doors. Those put the inactive leaf under a cylinder rather than under automatic operation, which changes who can secure and release it.
13) What is the difference between the Hager 293D and the ABH 1860P automatic flush bolts?
Both are automatic flush bolt pairs with 3-hour fire ratings and thermal lock. The 293D is a constant latching set of a 292S top and 293S bottom bolt with a 1 inch by 6-3/4 inch face plate and 3/4 inch throw, rated to 4 by 8 foot metal doors. The ABH 1860P/1862P is the equivalent automatic pair from ABH's 1860P Series. If your spec names one brand, they are the same class of device.
14) Is the Hager 293D suitable for a residential double door?
It is a commercial-duty device, stainless steel with steel components, meant for inactive metal doors in commercial openings. On a residential wood double door a decorative surface or mortise bolt fits better, for example the Delaney 6 inch square end solid brass flush bolt or the Delaney 7 inch slide type mortise flush bolt.
15) What two-point flushbolt has an interlock or auto-release mechanism if the Hager 293D does not suit the opening?
Two Adams Rite options handle the top and bottom positions as one linked assembly. The MS1880/MS1881 are two-point flushbolts with an interlock mechanism, and the MS2180 Series is an auto-release two-point flushbolt with a Smartlock mechanism. The Hager 293D also latches at two points, using one 292S and one 293S with a 3/4 inch throw and a 3/4 inch bolt backset, but its top and bottom bolts are separate units on adjustable, non-handed bolt head rods rather than a linked mechanism.
How fast can I get the Hager 293D US3 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 293D US3 come with a warranty?
Absolutely. The Hager 293D US3 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 293D US3?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 293D US3 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!