Hager 301D Residential Hinge P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.87
Hager 301D Residential Hinge Pin Stop for 1/4” and 5/16” Hinge Pins

Hager 301D Residential Hinge Pin Door Stop for 1/4" and 5/16" Hinge Pins

(No reviews yet) Write a Review

Model: 301D US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 301D Residential Hinge Pin Door Stop for 1/4" and 5/16" Hinge Pins

Adjustable Door Stop Solution for Residential Applications

The Hager 301D Residential Hinge Pin Stop provides reliable door positioning control for residential applications where standard door stops are not desirable. This wrought steel door stop with rubber bumpers works with both 1/4" (6 mm) and 5/16" (8 mm) hinge pins and offers adjustable positioning from 70 to 100 degrees. The positive slip-proof design ensures secure door positioning while meeting ANSI A156.16 certification standards.

Professional Features & Benefits

  • Universal Hinge Pin Compatibility: Works with both 1/4" (6 mm) and 5/16" (8 mm) hinge pins for versatile installation options.
  • Adjustable Door Positioning: Adjustable from 70 to 100 degrees allows customization for specific door opening requirements.
  • Positive Slip-Proof Design: Engineered to maintain secure door positioning without slipping or drift during use.
  • Durable Construction: Wrought steel construction with rubber bumpers provides long-lasting performance and surface protection.
  • Discreet Installation: Ideal for applications where standard door stops are not desirable or practical.
  • ANSI Certified: Meets ANSI A156.16 certification standards for quality and performance assurance.
  • Works with 1/4" (6 mm) and 5/16" (8 mm) hinge pins. For use where standard door stop stops are not desirable.

Technical Specifications

  • Box Quantity: 5
  • Case Quantity: 50
  • Certifications: ANSI A156.16 for L02223
  • Commercial/Residential: Commercial
  • Features: Works with 1/4" (6 mm) and 5/16" (8 mm) hinge pins. For use where standard door stop stops are not desirable.
  • Finishes: US3, US26D
  • Material: Wrought steel with rubber bumpers
  • Notes: Must purchase a non-NRP hinge for use with this pin stop
  • Subcategory: Floor Stops & Holders

Installation & Operation

  1. Verify door hinge pin diameter matches product specifications (1/4" or 5/16" pins only). Ensure hinge is non-NRP type for compatibility.
  2. Remove existing hinge pin from the door hinge where stop will be installed.
  3. Install the 301D hinge pin stop onto the hinge pin according to manufacturer instructions.
  4. Reinstall the hinge pin with the stop attached, ensuring proper alignment and secure fit.
  5. Adjust the stop position to achieve desired door opening angle between 70 and 100 degrees.
  6. Test door operation to verify smooth movement and secure stopping at the adjusted position. Make final adjustments as needed.

Professional Applications

  • Residential Door Control
  • Multi-Family Housing Units
  • Apartment and Condominium Buildings
  • Single-Family Home Installations
  • Property Management Applications
  • Renovation and Retrofit Projects

Why Choose Hager Quality?

Hager door hardware delivers professional-grade reliability with wrought steel construction and rubber bumper protection engineered for consistent performance. ANSI A156.16 certification ensures this residential stop meets industry standards for quality and durability. Designed for demanding residential applications where dependable door positioning control is essential.

Door stop and holder designed to protect walls and doors while controlling door position in commercial and institutional openings.

Product Specs

Subcategory:
Floor Stops & Holders
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Hinge Pin Door Stops
Commercial/Residential:
Commercial
Product Model:
301D
Product Substrate:
Wrought steel with rubber bumpers
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 301D US26D – Frequently Asked Questions

1) Will a hinge pin stop work on a hinge with non-removable pins (NRP)?
No. The 301D installs by pulling the existing hinge pin and replacing it with the stop's pin, so the hinge has to have a removable pin. On an NRP hinge the pin is set with a locking screw and cannot come out, so you need a non-NRP hinge for this stop. On out-swinging exterior doors where NRP hinges are there for security, use a floor or wall stop instead and leave the hinge alone.
2) What is the equivalent of a Hager 301D hinge pin door stop from another brand?
The closest cross-brand counterpart is the Trimco 1240 hinge pin door stop, from Trimco's 1240 Series. Both are the same style of stop: the unit replaces nothing on the door face and instead rides on the hinge pin itself, so the wall and the door base stay clear of hardware. The Hager 301D is wrought steel with rubber bumpers and fits 1/4 inch (6 mm) and 5/16 inch (8 mm) hinge pins, adjustable from 70 to 100 degrees. If you are matching pin diameter on an existing opening, confirm the pin size before swapping between the two, since the 301D is the one that states the 1/4 inch and 5/16 inch range.
3) My door has non-removable pin (NRP) hinges - can I still use a Hager 301D or a Trimco 1240?
Neither one works on an NRP hinge. A hinge pin stop like the Hager 301D installs by pulling the existing hinge pin and reseating it through the stop, which an NRP hinge is specifically built to prevent - the 301D calls for a non-NRP hinge for this reason. The Trimco 1240 is the same hinge pin stop design and mounts the same way. On an opening with NRP hinges, the stop has to come from a different family entirely: a wall stop, floor stop, or overhead stop that anchors to a surface rather than the hinge.
4) What finishes does the Hager 301D hinge pin stop come in?
Two: 626 satin chrome and 605 bright brass. Satin chrome is the one that disappears against the standard satin chrome or brushed nickel hinge you find in most apartment stock; bright brass matches older polished brass hinge and lever sets. Pick against the hinge it is going on rather than the lever, since the stop sits on the hinge and reads as part of it.
5) Should I use a hinge pin stop or a floor or wall stop?
A hinge pin stop is the answer when you cannot or do not want to put anything on the floor or the wall: rental turns, carpeted units, tile you do not want to drill, or a wall where the baseboard is not backed. The 301D is made for exactly the case where a standard stop is not desirable. A floor or wall stop is the better device where the door sees hard use or needs to swing wider than 100 degrees, since a hinge pin stop puts all the stopping load into the hinge and the top of the leaf.
6) What is the Hager 301D made of, and will it mark the door?
Wrought steel with rubber bumpers. The steel takes the load and the rubber is what actually touches the door face and the frame, so the contact points are cushioned rather than metal on paint. For a property manager turning units, that matters more than the steel does: it is the bumper that keeps the door face from getting scarred over a few hundred cycles.
7) Do I need to worry about handing when ordering a hinge pin stop?
No. The 301D clamps around the hinge pin and stops the door in whichever direction the leaf swings, so one part covers left and right hand doors. That is a real advantage on a fleet order: you can buy one finish and one part number for an entire building instead of splitting the count by handing.
8) Is a hinge pin stop like the Hager 301D or Trimco 1240 the right choice for a heavy commercial opening?
Understand what a hinge pin stop is doing before you standardize on one. Both the Hager 301D and the Trimco 1240 stop the door by loading the hinge pin, so the force of a door being thrown open transfers into the hinge rather than into a wall or floor anchor. The 301D is wrought steel with rubber bumpers and holds ANSI A156.16 certification. For openings where the door takes hard, repeated use - stairwells, loading corridors, high-traffic entries - buyers typically specify a floor stop or overhead stop that carries the load into structure, and reserve the hinge pin stop for units, offices, and unit entry doors where a floor-mounted stop would be a trip hazard or would not suit the finish floor.
9) How do you install a hinge pin door stop?
Drive the existing pin out of the hinge, fit the 301D onto the pin, drop the pin and stop back into the hinge knuckle, then set the stop arms to the angle you want anywhere from 70 to 100 degrees and swing the door to check it. No drilling, no anchors, no patching if the unit turns over. A maintenance tech does one in a couple of minutes with a hammer and a punch.
10) How many hinge pin stops come in a box or a case?
Five per box and 50 per case. For a multi-family turn or a corridor of unit entry doors, the 50-count case works out to one stop per door on a 50-unit run, which is how these usually get bought.
11) I need to match satin chrome and bright brass across a building - does the Hager 301D or the Trimco 1240 cover both?
The Hager 301D hinge pin door stop is offered in 626 satin chrome and 605 bright brass, which covers the two most common lever and hinge finishes in multi-family and light commercial work, so the stop reads as part of the same hardware set on the door. The Trimco 1240 comes from the 1240 Series of hinge pin stops; if you are matching an existing Trimco finish schedule across a property, confirm the finish designation on that series against what is already hanging. For a property manager standardizing a fleet of unit doors, picking one part number in one finish and repeating it is what keeps the reorder simple.
How fast can I get the Hager 301D US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 301D US26D come with a warranty?
Absolutely. The Hager 301D US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 301D US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 301D US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!