Hager 4G Round Pull, 1" Base D...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$94.64
$78.04
Hager 4G Round Pull, 1" Base Diameter, 2-3/4" Projection, 1-3/4" Clearance, 8" CTC

Hager 4G Round Pull, 1" Base Diameter, 2-3/4" Projection, 1-3/4" Clearance, 8" CTC

(No reviews yet) Write a Review

Model: 4G-US32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$94.64
$78.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 4G Round Pull, 1" Base Diameter, 2-3/4" Projection, 1-3/4" Clearance, 8" CTC

Hager's 4G products are designed to meet the demands of modern building projects with their durability and aesthetic appeal. The 4G multi-gang frame is a prime example, offering a solution for high traffic areas with its robust construction and ease of installation. The 4G round wrought door pull is another notable product, providing a stylish and functional finishing touch to any door. Hager's commitment to quality and innovation is evident in their 4G range, which includes a variety of products that cater to different needs and preference

 

Manufacturer Resources

Product Template

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Door Pulls, Push and Pull Plates
Product Category:
Door Trim and Accessories
Department:
Door Hardware
Product Projection:
1-3/4"

Hager 4G-US32D – Frequently Asked Questions

1) What is the center-to-center spacing on the Hager 4G round door pull?
The 4G round pull mounts on 8 inch centers, with a 1 inch base diameter and 1-3/4 inch hand clearance behind the grip. If you are replacing an existing pull and want to reuse the holes in the door, the existing pair has to be on 8 inch centers too, otherwise you are drilling fresh.
2) We need a back to back pull set on a glass or wood entry instead of a single side pull like the Hager 4G. What are the options?
The Hager 4G round pull is a single wrought pull. For matched pulls on both faces, the Deltana SSPORBB24 is a 24 inch back to back round offset set, the Deltana SSPOBB24 is the 24 inch back to back modern offset version, and the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick. The Sure-Loc PL-2KN is a double-sided knurled long pull.
3) Is 1-3/4 inch clearance enough for a gloved hand on an entrance door?
Yes. The 4G round pull gives 1-3/4 inch of clear space between the grip and the door face, which takes a full gloved grip. For comparison, the Ives 8102HD heavy duty straight pull runs 1-1/2 inch clearance, so the Hager sits slightly deeper.
4) What finishes does the Hager 4G round pull come in?
Two: 628 satin aluminum and 630 satin stainless steel. If the other openings in the building are already on 630 stainless push plates or pulls, take the 630 to match; 628 satin aluminum is the usual pick alongside aluminum storefront and anodized frames.
5) Should I use a round pull like the Hager 4G or an offset pull?
A straight round pull on 8 inch centers is the standard choice for a pull side paired with a push plate, typical on restroom and interior commercial doors where the user grabs and pulls straight back. An offset pull, like the Ives 8145 45 degree offset or the Ives 8169 C style offset, angles the grip away from the door face and is generally specified where a user needs to pull with a forearm or where the door is heavy and needs leverage.
6) Is the Hager 4G pull single-sided, and what do I put on the push side?
The 4G round pull is a door pull, so it handles the pull side only. Most commercial installs pair it with a push plate on the opposite face, such as the Trimco 1001 heavy duty push plate in 3 x 12 inches or the Trimco 1041 half-round push plate at 8 x 16 inches. If you want the grip on both faces instead, a back-to-back set like the Deltana SSPORBB24 round offset pulls is the other route.
7) Is a Trimco push plate a substitute for the Hager 4G pull?
No. The Trimco 1001-1 heavy duty push plate (3 inch by 12 inch) and the Trimco 1041 half-round push plate (8 inch by 16 inch) are flat plates for the push side of an opening, with no grip to pull against. The Hager 4G is a round pull with a 2-3/4 inch projection for the pull side. If you want both functions on one plate, the Trimco 1070 series combines push and pull plates at 3-1/2 inch by 15 inch.
8) What should I use instead of the Hager 4G pull on a restroom door or a night latch application?
For restroom openings the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull made for that use. For a door where the pull mounts over a rim cylinder, the Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel. The Hager 4G is a general purpose round pull at 8 inch center to center and does not carry cylinder prep.
9) What is the difference between the Hager 4G round pull and the ABH AB7200 for a high traffic stainless opening?
The ABH AB7200 is a solid stainless steel flat end pull handle at 7/8 inch diameter with through-bolt mounting, so the grip is slightly slimmer than the Hager 4G's 1 inch base diameter and the ends are flat rather than round. The 4G is available in 630 satin stainless steel if you want a stainless appearance with the round profile and 2-3/4 inch projection.
10) What is a 1 inch diameter equivalent to the Hager 4G if I need a different mounting style?
For the same 1 inch grip diameter in a straight pull, the ABH AB3300 flat end pull and the Ives 8103HD round pull both run 1 inch. The 8103HD is specified with through bolt mounting, which is what you want on a hollow metal or wood door where you are bolting through to a push plate on the far side. The ABH AB3310 is the offset version if the straight bar does not suit the opening.
11) Is the Hager 4G round pull suitable for a high traffic entrance?
It is built for high traffic openings, which is the intent behind the wrought 4G round pull. The 1 inch solid grip diameter and 8 inch centers put it in line with the heavy duty commercial pulls, so it is a reasonable standard across a fleet of doors in an apartment building, school, or office corridor.
12) Straight or offset: which pull profile should I pair with the Hager 4G on a matched set of doors?
The Hager 4G is a round pull with a 1-3/4 inch clearance behind the grip. If some openings need an offset instead, the ABH AB3310 is an offset flat end pull for surface mounting and the ABH AB3330 is the offset round end version, which is the closer visual match to a round pull. Straight alternatives include the ABH AB3300 flat end pull at 1.00 inch diameter.
How fast can I get the Hager 4G-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 4G-US32D come with a warranty?
Absolutely. The Hager 4G-US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 4G-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 4G-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!