Hager 790-904 Half Mortise Continuous Hinge, 1/8��� Inset

Certifications

ANSI A156.26 Grade 1 for 150-pound doors, UL

Clearance

1/8" minimum hinge side plus standard lockside clearance

Door Reinforcement

Wood - None required up to 200 lbs. For metal doors, a 1/8" (3 mm) thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs.

Electric Modifications

Power Transfer Preparation (EPT 2) or (EPT 10)

Fastener Size

#10-24 x 5/8" S/S Dril-Kwik® (metal frame), #1/4-20 x 3/4" 2C Dril-Kwik® (metal door), #10-16 x 1-1/4" S/S Type AB (wood door)

Finishes

US32D

Fire Rating

Up to 3 hr. metal and 90 min. wood composite

Frame Reinforcement

None required to 200 lbs. Heavier weight use 16-gauge channel.

Length

79", 83", 85", 95", 119"

Length Options

Standard

Material

14 Ga. (0.075") Type 304 Stainless Steel

Maximum Door Length

10'-0"

Maximum Door Thickness

1-3/4"

Maximum Door Weight

300 lbs

Notes

• Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames.
• Hager Companies 790 Series Stainless Steel Continuous Higes are approved for ANSI A156.26 Grade 1 for 150 lb doors and Grade 2 for 300 lb doors.

Optional Features

Replacement Moldings (M), Wide Throw, Security Studs, Dutch Door Prep (DUTCH)

Product Description

Half Mortise, 1/8" Inset, Door of Any Material

Special Features

1/4" (6.3 mm) diameter Stainless Steel Pin. Dual 6/6 Nylon bearings between each knuckle. Not recommended for doors with a beveled edge on the hinge side. Useful for ADA upgrade work, 1/8" (3.2 mm) inset.