Hager 790-905 Concealed Leaf Continuous Hinge, 1/8��� Inset

Certifications

ANSI A51011B Grade 1 for 150-pound doors, UL

Clearance

9/32" minimum hinge side plus standard lockside clearance

Door Reinforcement

Wood - None required up to 200 lbs. For metal doors, a 1/8" (3 mm) thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs.

Fastener Size

#10-24 x 5/8" S/S Dril-Kwik® (metal frame), #1/4-32 x 3/4" S/S machine fastener (used with adjustment stud), # 7/16-20 x 1-3/8" S/S adjustment stud (metal/wood door)

Finishes

US32D

Fire Rating

Up to 3 hr. metal and 90 min. wood composite

Frame Reinforcement

None required to 200 lbs. Heavier weight use 16-gauge channel.

Length

79", 83", 85", 95", 119"

Length Options

Standard and Custom

Material

14 Ga. (0.075") Type 304 Stainless Steel

Maximum Door Length

10-'0"

Maximum Door Thickness

1-3/4"

Maximum Door Weight

300 lbs

Notes

• For metal doors, a 1/8" (3.2mm) thick reinforcement plate is strongly recommended along the hinge edge for proper thread engagement of the adjustment studs.
• Any nonstandard length hinge may require a custom hole pattern based on the requested length.
• Consult Hager Companies to address the field prep for the doors and frames.
• Tamper resistant hospital tip available.
• Hager Companies 790 Series Stainless Steel Continuous Higes are approved for ANSI A156.26 Grade 1 for 150 lb doors and Grade 2 for 300 lb doors.

Optional Features

Tamper Resistant Hospital Tips (HT), Sheared leaf, Raised Barrel (SWAGED), Wide Throw, Security Studs, Dutch Door Prep (DUTCH)

Product Description

Concealed Leaf, Door of Any Material

Special Features

1/4" (6.3 mm) diameter Stainless Steel Pin. Dual 6/6 Nylon bearings between each knuckle. Door edge protection lip (both faces of door). Not recommended for doors with a beveled edge on the hinge side. 1/16" (1.6 mm) inset.