Hager 790-909 Full Surface Continuous Hinge, 1/8��� Inset

Certifications

UL, ADA

Clearance

1/8" minimum hinge side plus standard lockside clearance

Door Reinforcement

Wood - None required up to 200 lbs. For metal doors, a 1/8" (3 mm) thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs.

Fastener Size

#10-24 x 5/8" S/S Dril-Kwik® (metal frame), #1/4-20 x 3/4" 2C Dril-Kwik® (metal door), #1/4-14 x 1" 2C Type AB (wood frame)

Finishes

US32D

Fire Rating

Up to 3 hr. metal and 90 min. wood composite

Frame Reinforcement

None required to 200 lbs. Heavier weight use 16-gauge channel.

Length

79", 83", 85", 95", 119"

Length Options

Standard

Material

14 Ga. (0.075") Type 304 Stainless Steel

Maximum Door Length

10'-0"

Maximum Door Thickness

1-3/4"

Notes

Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames.

Optional Features

Wide Throw, Replacement Moldings (M), Security Fasteners, Security Studs, Dutch Door Prep (DUTCH)

Options

Optional sex bolts available (specify when ordering)

Product Description

Full Surface, 1/8" Inset, Swing Clear, Door of Any Material

Special Features

1/4" diameter Stainless Steel Pin. Dual 6/6 Nylon bearings between each knuckle. Useful for ADA upgrade work. Security molding. For beveled or square edge doors. 1/8" inset.