Hager 8300 Series 8319 Low Energy Automatic Door Operator for Paired Doors with Push Side Mount

Hager 8300 Series 8319 Low Energy Automatic Door Operator for Paired Doors with Push Side Mount

Professional Low Energy Automatic Door Operator for Simultaneous and Independent Paired Door Applications

The Hager 8300 Series 8319 is a commercial-grade low energy automatic door operator designed for paired door openings with simultaneous or independent operation capabilities. This push side mount operator accommodates doors up to 350 lbs and 5' maximum width, with adjustable swing degrees from 80° to 140°. Operating on 115 VAC 60 Hz with onboard 24 VDC power supply, the unit exceeds all ADA requirements with opening force under 15 lbs and closing force greater than 8 lbs. UL/cUL listed for up to 3-hour fire rating and ANSI A156.19 compliant for professional commercial applications.

Professional Features & Benefits

• Maximum Door Capacity: Supports doors up to 350 lbs and 5' maximum width for versatile commercial door applications.
• Adjustable Swing Range: 80° to 140° adjustable swing degree with maximum powered swing of 180° (push) and 140° (pull) for flexible installation requirements.
• ADA Compliance: Opening force under 15 lbs and closing force greater than 8 lbs exceeds all U.S. and Canada ADA requirements for accessibility.
• Dual Power System: 115 VAC 60 Hz operation with onboard 24 VDC 1 A power supply for accessories including electric and magnetic locks and sensors.
• Fire Rating Certification: UL/cUL listed for up to 3-hour fire rating with UL10C Positive Pressure rating and UL325 listing for life safety compliance.
• Programmable Operation: Flash upgradeable memory with adjustable opening/closing speeds, hold open time, boost on close function, and cycle count tracking.
• Manual Operation Capability: Functions as manual closer with or without power, ensuring continuous operation during power outages.
• 2 Year Manufacturer Warranty: Comprehensive warranty coverage for added confidence and protection in commercial applications.
• Non-handed
• Operates as a manual closer with or without power
• Onboard power supply for accessories i.e. electric and magnetic locks, sensors, etc.
• Built-in adjustable door stop for protection against wind or abusive environments
• Blow open function for smoke ventilation (alarm contacts)
• Equipped with cycle count
• Factory setting for ANSI 156.19 speed requirements AND hold time delay
• Night mode allows the exterior actuator to be deactivated by a rocker switch on the side of the operator
• On/Off/Hold Open Switch: Standard
• Fire Alarm input shunts swing activations until FACP is manually reset
• Memory is flash upgradeable

Technical Specifications

• ADA Compliant: t: Yes
• Applications: For use on fire-rated and non-fire-rated openings; Exterior Doors: Yes (Interior side only); Works on both outswing or inswing doors; Adjustable Opening Angle: Max Degree of Swing Powered -180 degrees (push), 140 (pull); Opening Force: <15 lbs. - Exceeds all ADA requirements; Closing Force: >8 lbs.
• Certifications: ANSI Meets A156.19; Complies with all U.S. and Canada ADA requirements for low energy operators; UL/cUL (Fire rating) Listed for up to 3 hours; UL10CPositive Pressure Rated; UL325 Listed
• Commercial/Residential: Commercial
• Finishes: ALM, BLK (priced same as DBZ), DBZ (ships with black arm)
• Grade: Grade 1
• Includes: Appropriate door signage included with each operator
• Installation: Single person installation using pre-drilled mounting holes
• Maximum Door Weight: 350 lbs
• Maximum Door Width: 5'
• Notes: For stocking distributors, operators and arms can be ordered separately allowing for reduced inventory and greater flexibility. See the price book for additional information.; Order form required for all Hager low energy operators. Order form can be found under Related Files. Please complete and submit with purchase order.; For High usage openings or abusive environments, Hager recommend using a 7000 Series Overhead Stop.
• Reveal: Push Arm: 9-3/4" (Reveals between 9-3/4" and 19", arm extension must be ordered separately); Pull Arm: 0"
• Series: 8300
• Size: 5" Hx 4-1/2" Dx Length equals opening width plus 3"
• Subcategory: Automatic Operators
• Swing Degree Details: 80° to 140°

Installation & Operation

1. Verify electrical requirements match available power supply. Confirm 115 VAC 60 Hz power and current capacity of 0.4 A to 1.2 A maximum per motor before proceeding.
2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
3. Mount the operator unit using pre-drilled mounting holes ensuring adequate clearance for wiring access, ventilation, and future service requirements.
4. Route and connect wiring according to manufacturer wiring diagrams. Connect onboard 24 VDC power supply for accessories as needed using appropriate wire gauge and connectors.
5. Configure operational settings including adjustable opening/closing speeds, hold open time, swing degree (80° to 140°), and programmable functions per application requirements.
6. Restore power and test all functions including normal operation, fire alarm input, night mode deactivation, and integration with connected access control systems.
7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

• Commercial Office Buildings
• Healthcare Institutions
• Educational Facilities
• Retail Establishments
• Government and Municipal Buildings
• Multi-Tenant Residential Properties
• Fire-Rated and Non-Fire-Rated Openings

Why Choose Hager Quality?

Hager 8300 Series automatic door operators deliver professional-grade reliability with Grade 1 construction rated for up to 3-hour fire applications and ANSI A156.19 compliance. The comprehensive 2 Year warranty provides added confidence for demanding commercial installations. Engineered with flash upgradeable memory and cycle count tracking, these operators provide dependable automated access control where consistent ADA-compliant performance is essential.

Support Resources

• Alarm Kit Installation Instructions (PDF)
• 4500/4600 Series Electric Exit Device Installation Instructions (PDF)
• HS4 Power Supply/Charger Installation Instructions (PDF)
• 8228 Push Activation Switch Installation Instructions (PDF)
• 8229 Touchless Activation Hardwired Installation Instructions (PDF)
• 2915 Keypad Installation Instructions (PDF)
• 2916P Proximity Keypad Installation Instructions (PDF)
• 8300 Series Programmer Instructions I-EA00273-Rev0 (PDF)
• 8300 Installation Instructions I-EA00257-Rev2 (PDF)
• 8300 Series Quick Start Guide - I-EA00259-Rev01 (PDF)
• 8300 Series Door Prep Drawing - S-EA00258-Rev02 (PDF)
• 8300 Series Door Arm Assembly - S-EA00261-Rev1 (PDF)
• 8300 Firmware Instructions - I-EA00397 - Rev 0.pdf (PDF)
• 8300 Series Order Form (PDF)