Halo HLB4SP 4-Inch LED Square ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$37.07
$32.43
Halo HLB4SP 4-Inch LED Square Lens Recessed Downlight with Remote Driver - 600 Lumens, 5-CCT Selectable, Square Ceiling Cutout

Halo HLB4SP 4-Inch LED Square Lens Downlight with Remote Driver

(No reviews yet) Write a Review

Model: HLB4SP069FS1EMWR

In Stock (leaves warehouse same day if ordered before 3pm ET)

$37.07
$32.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Halo HLB4SP 4-Inch LED Square Lens Downlight with Remote Driver

The Halo HLB4SP is a 4-Inch LED Square Lens Downlight engineered for professional-grade illumination, delivering 600 lumens of output with 5-color Field-SeleCCTable™ technology that lets installers choose 2700K, 3000K, 3500K, 4000K, or 5000K on-site without stocking multiple color-temperature SKUs. A slim die-cast trim with a textured low-glare prismatic lens keeps glare in check, while the remote driver configuration separates the driver from the fixture head to simplify maintenance access and reduce heat buildup in the ceiling cavity. Rated for 120-277V operation at 90 mA and Wet Location Listed for showers and covered outdoor spaces, this fixture is equally at home in residential remodels and commercial installations. With 90+ CRI performance and dimming down to 5%, the HLB4SP gives electrical contractors and specifiers a single, versatile downlight platform for new construction or remodel ceiling applications.

Key Features

  • Trade Size: 4-inch round cutout with a square lens trim, sized for new construction or remodel ceiling applications.
  • 600 Lumen Output: Bright, efficient illumination suitable for residential and commercial downlighting.
  • 5-Color Field-SeleCCTable™: Select 2700K, 3000K, 3500K, 4000K, or 5000K on-site, eliminating the need to stock multiple color-temperature SKUs.
  • 90+ CRI: Accurate, consistent color rendering across all five selectable color temperatures.
  • Dims to 5%: Phase-cut LE/TE dimming on 120V input for precise light-level control; verify dimmer compatibility with LE/TE dimmers rated for LED loads.
  • Remote Driver Design: Driver mounts separately in the ceiling cavity from the trim head, easing service access and keeping the cavity cooler.
  • Low-Glare Prismatic Lens: Slim die-cast trim with a textured lens minimizes glare while maintaining even light distribution.
  • 120-277V Operation: Compatible with standard residential and commercial voltage at 90 mA.

Certifications & Compliance

  • Wet Location Listed for all applications, including showers and covered outdoor spaces
  • Installation per NEC guidelines required for damp/wet locations

Technical Specifications

  • Lumens: 600
  • Dimming: Dims to 5% phase cut LE/TE (120V input)
  • Lamp Type: LED
  • Product Diameter: 4 Inch
  • Product Height: 5.75 Inches
  • Product Length: 5.125 Inches
  • Product Weight: 0.49 Pounds
  • Product Width: 2.75 Inches
  • Wet Location Listed: For all application including showers and covered outdoor spaces
  • Installation Location: Ceiling — new construction or remodel application
  • Light Temperature: 5-CCT Field Selectable (2700K/3000K/3500K/4000K/5000K), 90+ CRI

Typical Applications

  • Residential Kitchens, Living Areas, and Bathrooms
  • Shower and Wet-Area Ceiling Lighting
  • Covered Outdoor Patios and Entryways
  • Commercial Office, Retail, and Hospitality Accent Lighting
  • Healthcare, Education, and Multi-Family Common Areas

Why Halo?

The Halo HLB4SP pairs a low-glare die-cast trim with field-selectable color temperature and 90+ CRI performance, giving electrical contractors a single SKU that adapts to multiple lighting scenarios. Its remote driver design and Wet Location Listing for showers and covered outdoor spaces make it a reliable, code-compliant choice for demanding residential and commercial downlighting projects, backed by consistent 600-lumen output and dimming performance down to 5% on compatible LE/TE dimmers.

Manufacturer Resources

Product Specs

Amperage Rating:
90 mA
Arra Compliant:
No
Brightness Lumens:
600 lm (nominal)
Department:
Electrical
Dimming:
Dims to 5% phase cut LE/TE (120V input)
Lamp Type:
LED
Lens Trim:
Slim die-cast trim with textured low-glare prismatic lens
Lumens:
600
Marketpro Us Flag:
Yes
Mounting Method:
Ceiling Mount
Product Diameter:
4 Inch
Product Height:
5.75 Inches
Product Length:
5.125 Inches
Product Weight:
0.49 Pounds
Product Width:
2.75 Inches
Voltage Rating:
120-277V
Product Group:
Recessed Lighting
Product Type:
Recessed Trim
Installation Location:
Ceiling — new construction or remodel application
Indoor/Outdoor:
Indoor/Outdoor
Light Temperature:
5-CCT Field Selectable (2700K/3000K/3500K/4000K/5000K), 90+ CRI

Halo HLB4SP069FS1EMWR – Frequently Asked Questions

1) Can the HALO HLB4SP downlight be installed in a shower or a covered patio ceiling?
Yes. The HLB4SP is wet location listed for all applications including showers and covered outdoor spaces, and it's rated indoor/outdoor. Wire and seal it per NEC requirements for damp and wet locations and it's good for a shower ceiling, a covered patio, or an entry soffit. Note the remote driver still has to land somewhere dry inside the ceiling cavity.
2) Do I need to order separate SKUs for 3000K and 4000K, or can I set the color temperature on site?
Both routes exist on the HLB4SP. There's a field selectable version that switches between 2700K, 3000K, 3500K, 4000K and 5000K at the fixture (MPN HLB4SP069FS1EMWR), and there are two fixed versions if you'd rather not have a switch an occupant can find: HLB4SP069301EMWR for 3000K and HLB4SP069401EMWR for 4000K. All render at 90+ CRI. For a property manager stocking one part across mixed spaces, the field selectable is the one that covers every opening; for a spec job locked to one temperature, order the fixed MPN.
3) Will the HALO HLB4SP work on my existing dimmers?
The HLB4SP dims to 5 percent using phase-cut LE/TE dimming on a 120V input. That means a standard forward-phase or reverse-phase wall dimmer, but it has to be one rated for LED loads, not an old incandescent-era dimmer. Two things catch people out: the dimming spec is tied to 120V input, so a 277V feed in a commercial space is a non-dimming install here, and at 90 mA draw per fixture you can hang a lot of these on one dimmer before you hit its wattage rating, but low-end flicker comes from dimmer mismatch, not from load. Check the dimmer's LED compatibility list before you commit a whole floor.
4) Can I run the HALO HLB4SP on 277 volts in a commercial building?
Yes, the HLB4SP is rated 120-277V, so it drops straight onto a 277V commercial branch circuit with no separate transformer or different SKU. Current draw is 90 mA. The one thing that changes at 277V is dimming: the phase-cut LE/TE dimming to 5 percent is specified on 120V input, so plan a 277V run as switched rather than dimmed.
5) What else do I have to buy to install the HALO HLB4SP in new construction?
The trim head and remote driver are the fixture. For a new construction job you'll also want a New Construction Mounting Frame, which is sold separately, and Extension Cables if the driver has to sit further from the head than the supplied cable reaches. Decorative Overlays are also sold separately if you want to change the look of the trim face. Budget those line items into the takeoff up front, because a crate of trims with no frames stops a rough-in.
6) What size ceiling cutout does the HALO HLB4SP 4-inch downlight need, and is the hole round or square?
It's a 4 inch aperture product mounting to a round ceiling cutout, so you core a round hole even though the visible lens is square. That's the detail that trips people up on this one: square face, round hole. Overall the unit measures 5.75 x 5.125 x 2.75 inches and weighs 0.49 pounds, which is what you need for cavity clearance when you're planning the driver location alongside joists and ductwork.
7) What is a remote driver downlight and why would I pick one over a fixture with the driver built into the housing?
On the HLB4SP the driver is a separate box that mounts in the ceiling cavity and feeds the trim head through a cable, instead of riding on the back of the fixture. Two practical reasons to want that: the driver is the part that usually fails, and when it's remote you replace it without pulling the trim out of a finished ceiling, and keeping the driver off the head cuts heat buildup in the cavity. It also helps in shallow plenums and insulated ceilings where an integral-driver can of the same aperture won't tuck up. The trade is one more component to locate and one more connection to make on install.
8) Is the HALO HLB4SP square or round, and will it match the round cans already in my ceiling?
The visible trim is square. The HLB4SP is a slim die-cast square trim with a textured low-glare prismatic lens, mounting into a round ceiling cutout. If the rest of your building is on round trims, this will not visually match, so it's a poor choice for a one-off replacement in an existing round-trim run. Where it does earn its place is a full re-lamp or a new area where you want the square aesthetic throughout, or a bathroom and shower zone where the wet location listing rules.
9) Can the lamp be replaced in the HALO HLB4SP when it burns out?
No. It's an integrated LED, so there is no socket and no lamp to change. The service part is the driver, and that is precisely why the remote driver layout matters for a maintenance department: the driver sits separately in the ceiling cavity and connects by cable, so a driver swap doesn't mean disturbing the trim in a finished ceiling. For an MRO stockroom, keep spare drivers rather than lamps.
10) Can I use the HALO HLB4SP on a federally funded ARRA / Buy American project?
No. The HLB4SP is not ARRA compliant, so it will not satisfy a Buy American clause on a federally funded job. Government and institutional buyers working under those requirements should source a compliant downlight instead. For non-federal commercial, healthcare, education and multi-family work there's no such restriction.
11) Can the HALO HLB4SP be used in a remodel, or is it new construction only?
Both. The installation is specified for ceiling new construction or remodel applications. In new construction you'd pair it with a New Construction Mounting Frame (sold separately); in a remodel you're working through an existing round cutout and finding a spot in the cavity for the remote driver, with Extension Cables available separately if the reach is long. The remote driver is usually an advantage in retrofit work, since the head itself is shallow and the bulky part can sit off to one side of a joist.
How fast can I get the Halo HLB4SP069FS1EMWR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Halo HLB4SP069FS1EMWR come with a warranty?
Absolutely. The Halo HLB4SP069FS1EMWR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Halo HLB4SP069FS1EMWR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Halo HLB4SP069FS1EMWR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!