You may also like
HEAT-SHR LKG FORK TERM, 16-14, No8,
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Heat Shrinkable Locking Fork Terminal
- Standards:
- UL E9809, UL E66716
- Voltage Rating:
- 600 V
- Wire Size:
- 16-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Copper
Sta-Kon RBS14-8FLX – Frequently Asked Questions
1) What wire size does the Sta-Kon RBS14-8FLX fork terminal take?
The RBS14-8FLX is sized for 16 to 14 AWG conductors, which is what the blue insulation color signals on a standard crimp terminal color code. If you are terminating 22-18 AWG (red) or 12-10 AWG (yellow), this is the wrong barrel and the crimp will not hold.
2) What stud or screw size does this locking fork terminal fit?
It is a No. 8 stud terminal, so the fork slot drops over a #8 screw or stud. The locking fork tangs grip the screw head so the terminal will not back off the stud once torqued, which is the difference between this and a plain spade.
3) Is the Sta-Kon RBS14-8FLX terminal sealed against moisture?
Yes. It is a heat shrinkable terminal, so after crimping you heat the insulation sleeve and it shrinks down over the barrel and wire jacket to seal the termination. That makes it suitable for wet, washdown, or outdoor locations where a standard nylon or vinyl barrel terminal would wick moisture into the strands.
4) What voltage is this fork terminal rated for?
600 V, which covers standard commercial and industrial control panel, motor terminal box, and branch circuit work at 120/208, 277/480 and below.
5) Is the Sta-Kon RBS14-8FLX UL listed?
It carries UL file numbers E9809 and E66716. If your inspector or spec requires UL recognized terminations on control wiring, those are the files to reference.
6) Is this terminal copper or aluminum, and can I use it on aluminum conductors?
The barrel is copper, so it is for copper conductors only. Aluminum wire needs a terminal specifically rated AL/CU with the proper inhibitor compound.
7) Should I use a locking fork terminal or a ring terminal on a terminal block?
A locking fork like the RBS14-8FLX slides under a loosened #8 screw without pulling the screw all the way out, which saves real time on a crowded panel or a terminal strip you are servicing. The tangs resist the wire backing off. A ring terminal is the choice where the spec or equipment maker requires a fully captive connection, since it cannot come off the stud at all. For routine control panel and device terminations on #8 screws, the locking fork wins on serviceability.
8) Where is the Sta-Kon RBS14-8FLX made?
These terminals are made in the United States, which matters if you are filling a government, federal facility, or Buy American specified order.
9) Do I need a special crimp tool for this heat shrink terminal?
Crimp it with a tool matched to the 16-14 AWG blue color code die, then apply heat to shrink the sleeve. The crimp has to be made first and the barrel fully seated before you shrink, or the seal closes over a bad connection you cannot inspect.
How fast can I get the Sta-Kon RBS14-8FLX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RBS14-8FLX come with a warranty?
Absolutely. The Sta-Kon RBS14-8FLX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RBS14-8FLX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RBS14-8FLX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.