You may also like
Hex Bar, 24-Inch
3244 - spec sheet
Warnings
- Always wear approved eye protection.
Features
- 24 inch length
- Provides extra leverage when positioning steel members and aligning bolt holes
- Chisel-end is at a 15-degree angle to give greater leverage
- Made in USA
- Forged fit-up bar is pointed on one end
3244 - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Body Diameter:
- 3/4" (1.9 cm)
- End:
- 15°
- Item Depth:
- 24.0000 in
- Item Height:
- 1.0000 in
- Item Weight:
- 2.5000 lbs
- Item Width:
- 1.0000 in
- Overall Length:
- 24" (61 cm)
- Department:
- Tools
- Product Group:
- Hand Tools
- Product Subgroup:
- Hammers & Wrenches
- Product Weight:
- 2.5 lb (1.1 kg)
- Product Type:
- Pry Bar
- Country Of Origin:
- United States
- Product Height:
- 1 in
- Product Width:
- 1 in
- Product Depth:
- 24 in
Klein Tools 3244 – Frequently Asked Questions
1) What is the Klein Tools 3244 hex bar actually used for on an ironwork or steel job?
The Klein 3244 is a forged fit-up bar for structural steel work. You use it to lever steel members into position and to line up bolt holes in connections so the bolts can be driven. One end is pointed, which is what goes into the hole to drag the two plates into alignment, and the other end is a chisel. It is a leverage and alignment tool, not a striking or prying-out tool.
2) Why is the chisel end on the 3244 bar angled instead of straight?
The chisel end sits at a 15 degree angle to the shaft. That offset is what lets you get purchase and more leverage when the bar is laid near-flat against a flange or plate, rather than having to stand it up to bite. Straight-chisel bars lose that advantage in tight connections.
3) Will the pointed end of the Klein 3244 go through a standard bolt hole for aligning connections?
The bar is 3/4 inch at the hex body and tapers to a point on one end, so the taper enters holes smaller than 3/4 inch and seats as it drives in. The hex body itself is the stop. For drift-pin style alignment on larger holes you get the lever action from the shaft bearing on the hole edge.
4) Can I hit the Klein 3244 hex bar with a hammer to drive it into a bolt hole?
Klein lists the 3244 as a leverage and alignment bar for positioning steel and lining up bolt holes, not as a struck tool. If you need something built to be hammered, use a drift pin or a struck-tool-rated driver instead. Wear approved eye protection whenever you are working the bar.
5) Is the Klein 3244 hex bar made in the USA?
Yes, the 3244 fit-up bar is made in the USA. It is a forged bar, not a cast or welded assembly, so it is one piece from point to chisel.
6) What is the Klein 3244 ordering part number?
Order it as Klein Tools 3244. The hex bar comes in the single 24-inch configuration, so there is no length, finish, or end option to specify.
How fast can I get the Klein Tools 3244 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 3244 come with a warranty?
Absolutely. The Klein Tools 3244 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 3244?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 3244 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.