You may also like
HID 5455-311-01 ProPro II Reader Cover, No Bezel required, Charcoal Gray,
Model: HID-5455-311-01
ProxPro® II125 kHz new generation proximity card readerBase Part Numbers • 5455, 5458• Versatile Proximity Card Reader• Optional glass mount kit available for mounting thereader behind glass• Power...
HID
$70.86
ProxPro® II
125 kHz new generation proximity card reader
Base Part Numbers • 5455, 5458
• Versatile Proximity Card Reader
• Optional glass mount kit available for mounting the
reader behind glass
• Power requirements: 5-16 VDC
• Dimensions: 5.0 ̋ x 5.0 ̋ x 1.0 ̋ (12.7 cm x 12.7 cm x 2.54 cm)
• Read Range: up to 8.0 ̋ (20.5 cm)*
Manufacturer Resources
Product Specs
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Readers, Keypads and Credentials
- Product Type:
- Access Control Readers
- Subcategory:
- Accessories, Components and Parts
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
HID 5455-311-02 – Frequently Asked Questions
1) What is the HID 5455-311-02 part exactly, a whole reader or just the cover?
It's the replacement front cover for the HID ProxPro II proximity reader in beige. The reader electronics are not part of it. Use it when a cover on an installed ProxPro II is cracked, faded, or you're changing the color of the reader face to beige. The ProxPro II itself is a 125 kHz proximity card reader built on base part numbers 5455 and 5458.
2) Do I need a separate bezel to install this beige ProxPro II cover?
No separate bezel is required. The 5455-311-02 cover mounts to the ProxPro II without one, so the only thing you order for a cover swap is the cover itself.
3) What size opening does a ProxPro II reader take up on the wall or mullion?
The ProxPro II housing measures 5.0 x 5.0 x 1.0 inches (12.7 cm x 12.7 cm x 2.54 cm), so plan a flat mounting surface of at least 5 inches square. That footprint is too wide for a typical narrow door mullion, which is why ProxPro II is normally wall or frame mounted rather than mullion mounted.
4) Can I mount a ProxPro II behind glass on a storefront entrance?
Yes, with the optional glass mount kit HID offers for mounting the reader behind glass. That kit is ordered separately from the cover. Read range on the ProxPro II is up to 8.0 inches (20.5 cm), so account for the glass thickness and the credential being held slightly further off the reader face.
5) What power does a ProxPro II reader need at the door?
5 to 16 VDC. That range lets it run off most access control panel reader ports or a separate low voltage supply without a step-down. The cover itself carries no electronics and needs no power.
6) If I need a whole reader rather than just a cover, what 125 kHz option is there?
The SDC IPRW Series Wiegand proximity reader is a complete 125 kHz unit with HID compatibility, so it works with the same 125 kHz credentials your ProxPro II population already carries. Bear in mind it is a different housing, so an SDC reader will not accept this HID cover and the two will not look identical side by side on a bank of doors.
7) We need a 125 kHz prox reader at a new opening rather than a housing part. What are the options?
For a new opening you need a full reader, not a cover. The SDC IPRW Series is a Wiegand-output proximity reader with 125 kHz HID compatibility. The HID 5455-311-02 is only the beige outer cover for a ProxPro II, which is the 125 kHz reader family using base part numbers 5455 and 5458, with 5 to 16 VDC power and a 5.0 by 5.0 by 1.0 inch footprint. Order the cover only when you are refreshing an installed ProxPro II.
8) If I swap a ProxPro II for an SDC IPRW reader, does the 5455-311-02 cover still apply?
No. The 5455-311-02 cover is dimensioned for the ProxPro II housing, a 5.0 by 5.0 by 1.0 inch reader under base part numbers 5455 and 5458, and it installs without a separate bezel. The SDC IPRW Series is its own reader with its own housing, so a ProxPro II cover has nothing to attach to. Keep the cover on the ProxPro II units you are retaining and treat the IPRW as a standalone replacement at the openings you are converting.
9) What color options does this ProxPro II cover come in?
This particular cover ships in beige only. If your other readers in the building are a different color, the beige face will not match them, so check what's already on the adjacent doors before you standardize on it.
10) Is the ProxPro II suitable for commercial buildings or is it a residential reader?
It's a commercial access control reader, used in offices, multi-family common areas, healthcare and education openings where credentials are managed centrally. The cover is a commercial-grade replacement part for that reader.
How fast can I get the HID 5455-311-02 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HID 5455-311-02 come with a warranty?
Absolutely. The HID 5455-311-02 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HID 5455-311-02?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the HID 5455-311-02 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.