HID 6005-111-04 ProxPoint Plus Reader Cover, Classic, Charcoal Gray

It is the cover only, in the Classic style with a charcoal gray finish. There is no electronics package with it, so if you need a working reader you need the ProxPoint Plus unit itself. Buy this when the housing is cracked, faded, or marked up and the reader behind it still works.

It fits the ProxPoint Plus proximity reader family built on base part numbers 6005 and 6008. Check the number printed on your existing reader before ordering, since the cover is specific to that housing.

The HID 6005-111-04 is the charcoal gray classic cover for the ProxPoint Plus reader, so it is a housing part and not a powered reader. If you need a complete credential reader for the opening, the SDC IPRW Series is a Wiegand proximity reader with 125 kHz HID compatibility, which matches the 125 kHz proximity technology the ProxPoint Plus family uses. Order the cover only when the electronics are already mounted and you are replacing a cracked, faded, or wrong-color housing.

No. The cover is the housing, not the antenna or board. The ProxPoint Plus reads at 125 kHz with a range up to 3.0 inches (7.5 cm) and can mount directly on metal with no change in read range, and replacing the cover leaves all of that as it was.

The wiring stays put. The reader runs on 5 to 16 VDC and the cover does not touch the power or data terminations, so a cover swap is a mechanical job on an existing installed reader. The beeper and multicolor LED, which can be host or locally controlled, are unaffected.

A cover will not help a failed reader. For a replacement unit that reads the same 125 kHz HID credentials, the SDC IPRW Series Wiegand proximity reader is listed with 125 kHz HID compatibility, so your existing cards keep working on a Wiegand panel input.

No. The 6005-111-04 classic cover is made for the ProxPoint Plus reader, whose base part numbers are 6005 and 6008, and it fits that housing footprint of 3.14 in x 1.70 in x 0.66 in. The SDC IPRW Series is a separate Wiegand proximity reader line, so its housing is not interchangeable even though both work with 125 kHz HID proximity credentials. Match the cover to the reader family already on the door frame.

The ProxPoint Plus, which the 6005-111-04 charcoal gray classic cover dresses, can mount directly on metal with no change in read range, and it reads up to 3.0 in with a 5 to 16 VDC supply - useful on aluminum mullions and hollow metal frames. The SDC IPRW Series is a Wiegand proximity reader with 125 kHz HID compatibility, so it will read the same credential population; confirm its mounting and voltage requirements against your frame condition before committing.

Charcoal gray in the Classic style is the common ProxPoint Plus look, so it matches openings already fitted with that housing. If your other doors carry a different cover color or style, order the matching one for those rather than mixing, since the cover is the only visible part of the reader.