You may also like
High-Speed Twist Drill 15/64 3-7/8" (10pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics HSD11 – Frequently Asked Questions
1) How long is the Metallics HSD11 15/64 drill bit, and will it reach through a stud with a box on it?
Overall length is 3-7/8 inches on the HSD11. That is a standard jobber length, so usable flute depth is a fraction of the total once the shank is in the chuck. It drills through dimensional lumber and sheet steel fine, but it is not a long-reach bit for drilling deep through doubled studs or plates.
2) Can I use the Metallics HSD11 high-speed twist drill on steel, or is it only for wood?
High-speed steel twist drills like the HSD11 cut mild steel, aluminum, and wood. That covers the usual electrical tasks: drilling steel boxes, enclosure sides, strut, and metal studs. Masonry and concrete need a carbide-tipped bit instead, not an HSS twist drill.
3) How many bits come in a pack of Metallics HSD11 drills?
Ten bits per pack, supplied in a pouch rather than individual tubes or a plastic index case. It is a consumable quantity meant for a service van or a job box, not a single replacement bit.
4) Will the Metallics HSD11 fit a standard cordless drill chuck?
Yes. At 15/64 inch, the shank is well under the 3/8 inch capacity of the smallest common keyless chucks, so it fits 3/8 inch and 1/2 inch drills and drivers with a round-shank chuck. It is not a hex or impact-rated shank.
5) What is the Metallics part number for the 15/64 inch twist drill?
Order HSD11. That is the Metallics manufacturer part number for the 15/64 inch by 3-7/8 inch high-speed twist drill, sold ten to a pouch. One model, no size or finish options to specify.
How fast can I get the Metallics HSD11 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics HSD11 come with a warranty?
Absolutely. The Metallics HSD11 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics HSD11?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics HSD11 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.