Hoffman Lay-In Wireway Straigh...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$201.76
Hoffman Lay-In Wireway Straight Section, Galvanized Steel

Hoffman Lay-In Wireway Straight Section, Galvanized Steel

(No reviews yet) Write a Review

Model: F1010T124GV

In Stock (leaves warehouse same day if ordered before 3pm ET)

$201.76
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hoffman F66T148GV Galvanized Steel Lay-In Wireway Straight Section

The Hoffman F66T148GV is a galvanized steel lay-in wireway straight section engineered to organize, route, and protect electrical wiring and cable runs in industrial, commercial, and institutional facilities. As a straight-section component of Hoffman's lay-in wireway system, the F66T148GV allows electricians to lay conductors directly into the trough without pulling wire through conduit, simplifying installation, future circuit changes, and ongoing maintenance. Constructed from galvanized steel for corrosion resistance and long-term durability, this straight section is designed to integrate with compatible Hoffman lay-in wireway fittings, covers, and accessories to build out a complete raceway system tailored to the layout of the installation.

Key Features

  • Straight Section Design: Provides a direct run segment for Hoffman lay-in wireway systems, allowing conductors to be laid into the trough rather than pulled through, which reduces installation labor and downtime.
  • Durable Construction: Fabricated from galvanized steel, offering resistance to corrosion and the rigors of industrial and commercial environments.
  • Lay-In Accessibility: The lay-in style construction gives installers and maintenance electricians easy access to conductors for moves, adds, and changes without disturbing the entire raceway run.
  • Galvanized Finish: The galvanized coating helps protect the steel enclosure from rust and environmental exposure over the service life of the installation.
  • System Compatibility: Designed to work as part of the broader Hoffman lay-in wireway product family, pairing with straight sections, fittings, and covers to configure a complete wire management run.
  • Organized Cable Management: Helps keep power, control, and signal wiring neatly routed and separated, supporting cleaner panel and equipment room layouts.

Technical Specifications

  • Product Type: Lay-In Wireway, Straight Section
  • Material: Galvanized Steel
  • Finish: Galvanized
  • Configuration: Straight Section

Typical Applications

  • Industrial Control Panel and Machine Wiring
  • Commercial and Institutional Electrical Rooms
  • Wire and Cable Raceway Systems
  • Panelboard and Switchgear Wiring Runs
  • Facility Retrofits and New Construction Wire Management

Why Hoffman?

Hoffman lay-in wireway components like the F66T148GV are built from galvanized steel to deliver dependable, corrosion-resistant performance for demanding wire management applications. The lay-in design and modular straight-section construction give electrical contractors and facility maintenance teams a practical, code-conscious way to route and protect conductors, making Hoffman a trusted choice for organized, serviceable wireway installations.

Manufacturer Resources

Product Specs

list_batch:
HOF-20260924
Department:
Electrical
Product Subgroup:
Wireway
Product Type:
Wireway
Product Group:
Conduit & Raceway

Hoffman F1010T124GV – Frequently Asked Questions

1) What sizes does the Hoffman lay-in wireway straight section come in?
Three trough sizes are offered: 6 x 6 x 48 inches (F66T148GV), 10 x 10 x 24 inches (F1010T124GV), and 10 x 10 x 48 inches (F1010T148GV). The first two numbers are the cross section of the trough and the third is the run length, so the 24 inch piece is the short filler length when a 48 inch section overshoots the wall or equipment line.
2) Is galvanized steel wireway okay for a damp industrial plant room?
The straight sections are fabricated from galvanized steel, and the galvanized coating is there to resist rust and environmental exposure in industrial and commercial spaces. That covers general plant and electrical room conditions. For washdown, chemical exposure or outdoor wet locations you want a wireway specifically rated for that environment rather than a standard galvanized indoor trough.
3) Can I mix the 6 x 6 and 10 x 10 Hoffman sections in the same run?
No. The 6 x 6 and 10 x 10 troughs are different cross sections and will not butt up flush or share covers. Pick one size for the whole run based on your fill, and use the 24 inch and 48 inch lengths of that size to make up the distance. Both lengths are offered in 10 x 10; the 6 x 6 is offered at 48 inches.
4) Which Hoffman wireway size should I use for a panelboard feeder gutter?
For a gutter carrying feeders or a heavy bundle into a panelboard or switchgear, the 10 x 10 inch trough gives the larger cross section and bending room. The 6 x 6 is the lighter choice for control and signal wiring around machines and smaller equipment rooms. Size it to your conductor fill and bending space requirements, then choose 24 or 48 inch lengths to make the run.
5) I need to add circuits to an existing trough later. Does this design allow that?
That is the main reason to specify lay-in. The cover comes off a section and conductors are added or removed in place, without disturbing the rest of the raceway run. For a facility maintenance team doing moves, adds and changes on a live floor, that beats re-pulling conduit.
6) What is the exact part number for the 6 inch Hoffman lay-in wireway?
F66T148GV is the Hoffman manufacturer part number for the 6 x 6 x 48 inch galvanized lay-in straight section. The 10 x 10 equivalents are F1010T124GV at 24 inches and F1010T148GV at 48 inches.
How fast can I get the Hoffman F1010T124GV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hoffman F1010T124GV come with a warranty?
Absolutely. The Hoffman F1010T124GV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hoffman F1010T124GV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hoffman F1010T124GV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!