Hubbell Wiring SEC50BA Nylon 6...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.45
Hubbell Wiring SEC50BA Nylon 6/6 Low Profile Cable Connector

Hubbell Wiring SEC50BA Nylon 6/6 Low Profile Cable Connector

(No reviews yet) Write a Review

Model: SEC50BA

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hubbell Wiring SEC50BA Nylon 6/6 Low Profile Cable Connector

The Hubbell Wiring SEC50BA is a Nylon 6/6 low profile SEC model cable connector engineered to grip and secure cables and cords with outer diameters ranging from 0.17-Inch to 0.45-Inch. Designed as part of the Hubbell Wiring SEC connector series, this low profile fitting is built for installations where a compact footprint is essential, such as crowded panels, junction boxes, and equipment enclosures. The molded Nylon 6/6 body combines light weight with strong mechanical performance, helping installers create a secure strain-relief point for a wide range of cable diameters. The connector's low profile geometry also simplifies routing in densely populated wireways, keeping cable entries organized and reducing clutter inside the enclosure. Electricians and panel builders can rely on the SEC50BA to organize and protect cable runs while maintaining a low profile footprint that does not add unnecessary bulk to the enclosure.

Key Features

  • Cable Range: Accommodates cable and cord outer diameters from 0.17-Inch to 0.45-Inch, covering everything from thin control cables to heavier jacketed cords.
  • Nylon 6/6 Construction: Molded from lightweight, impact-resistant Nylon 6/6 thermoplastic that resists common abrasion encountered in industrial and commercial environments.
  • Low Profile Body: The SEC model design keeps connector height to a minimum, making it well suited to tight enclosure clearances and stacked panel installations.
  • SEC Model Series: Part of the Hubbell Wiring SEC connector platform used for consistent cable management across compatible applications.
  • Secure Cable Retention: Connector body is designed to grip the cable jacket securely, helping reduce strain on downstream terminations and connections.
  • Lightweight Design: Nylon construction reduces overall connector weight compared to metallic alternatives, simplifying handling and installation.
  • Compatible Cable Types: Suited for round jacketed cables and cords commonly used in control, signal, and power wiring applications.
  • Wide Size Coverage: A single SEC50BA connector accommodates multiple cable diameters within its 0.17-Inch to 0.45-Inch range, helping reduce the number of connector SKUs installers need to stock.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Cable and Cord Management in Control Panels
  • Machine and Equipment Wiring
  • Signal and Control Wiring Enclosures
  • Low-Clearance Enclosure and Junction Box Installations
  • Commercial and Industrial Electrical Assemblies
  • Panel Builder and OEM Wiring Projects

Why Hubbell Wiring?

Hubbell Wiring engineers the SEC50BA from durable Nylon 6/6 material, delivering a lightweight, low profile cable connector designed for dependable strain relief across a 0.17-Inch to 0.45-Inch cable diameter range. The SEC model platform reflects a focus on practical, field-tested connector designs that simplify cable management in compact enclosures. Choose Hubbell Wiring for consistent, professional-grade electrical components suited to demanding commercial, industrial, and OEM wiring projects.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
HUG-20260922
Product Type:
Connector
Department:
Electrical
Product Subgroup:
Cord Grips
Product Color:
Black
Product Material:
Non-metallic
Product Group:
Wiring Devices

Hubbell Wiring SEC50BA – Frequently Asked Questions

1) What cable diameter range does the Hubbell SEC50BA connector fit?
The SEC50BA grips round jacketed cable and cord with an outer diameter from 0.17 inch to 0.45 inch. That one body covers thin control and signal cable up through heavier jacketed cords, so a panel builder can carry a single connector instead of several sizes. Measure over the cable jacket, not the conductors, and if your cord measures outside that window the SEC50BA will not hold it properly.
2) Can an Ocal ST34-G connector be used in place of a Hubbell SEC50BA?
No, they do different jobs. The Hubbell SEC50BA is a Nylon 6/6 low profile cable connector that grips the jacket of a round cable or cord with an outer diameter of 0.17-Inch to 0.45-Inch, providing strain relief where the cable enters a panel or enclosure. The Ocal ST34-G is a PVC-coated steel non-grounding liquidtight straight connector in the 3/4-Inch trade size, which terminates liquidtight flexible conduit rather than a bare jacketed cable. If the run is in flexible conduit, the ST34-G is the fitting; if an individual cord enters the box directly, the SEC50BA is the fitting.
3) What should I use instead of the SEC50BA if the enclosure entry is in a wet or corrosive location with flexible conduit?
For liquidtight flexible conduit in that kind of environment, look at the Ocal ST145-G or ST34-G PVC-coated liquidtight flexible conduit connectors, both from the Ocal series. They terminate liquidtight flexible conduit and carry a PVC coating over steel. The Hubbell SEC50BA is a molded Nylon 6/6 low profile connector intended to grip round jacketed cables and cords from 0.17-Inch to 0.45-Inch outer diameter in control panels, junction boxes, and equipment enclosures, so it addresses cable strain relief rather than conduit termination.
4) Will a cable connector fit where I have almost no clearance behind the panel?
That is the reason the SEC model exists. The SEC50BA is a low profile body that keeps connector height to a minimum, which is what makes it workable in crowded panels, stacked enclosure installs, junction boxes, and densely populated wireways where a taller fitting would foul the door or the adjacent cable run.
5) What is the Hubbell SEC50BA made of, and will it hold up in an industrial panel?
Molded Nylon 6/6 thermoplastic. It is impact resistant and resists the common abrasion found in industrial and commercial environments, and it weighs noticeably less than a metallic fitting, which matters when you are populating a whole enclosure wall. If your application calls for a metal or PVC-coated steel fitting, this is not the part.
6) Does the SEC50BA actually relieve strain on my terminations, or is it just a bushing?
It is a grip. The body clamps onto the cable jacket to create a secure strain-relief point, so pull on the cord is taken at the enclosure wall instead of at the screw terminals or crimps downstream. That is why it gets used on machine and equipment wiring and OEM panel builds where the cord gets flexed or tugged.
7) I need one fitting that covers several cable diameters. Is the SEC50BA a better choice than ordering connectors by trade size?
The Hubbell SEC50BA accepts round jacketed cables and cords anywhere from 0.17-Inch to 0.45-Inch outer diameter, so a single part number covers thin control cable up to heavier jacketed cord and cuts the number of connector SKUs on the shelf. Trade-size conduit fittings such as the Ocal ST34-G are specified to one size, 3/4-Inch in that case, so each conduit size needs its own part. For a panel shop stocking by cable diameter rather than conduit size, the SEC50BA range approach is the one that consolidates.
8) Why choose the nylon SEC50BA over a steel fitting like the Ocal ST145-G?
The Hubbell SEC50BA is molded from Nylon 6/6 thermoplastic, which is lighter than metallic alternatives and keeps connector height to a minimum, so it suits tight enclosure clearances and stacked panel installations where a bulkier body would not fit. The Ocal ST145-G is a PVC-coated liquidtight flexible conduit connector from the Ocal series and is built around conduit termination. The deciding factors are what is entering the box, a cable or a liquidtight conduit, and how much clearance the enclosure allows.
9) What part number do I order for the Hubbell low profile SEC cable connector?
Order Hubbell Wiring SEC50BA. It is sold as a single model with no finish or size options to specify, since the 0.17 to 0.45 inch cable range is covered by the one body.
How fast can I get the Hubbell Wiring SEC50BA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hubbell Wiring SEC50BA come with a warranty?
Absolutely. The Hubbell Wiring SEC50BA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hubbell Wiring SEC50BA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hubbell Wiring SEC50BA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!