Greenlee 90508068 Hydraulic Oil , 1 Quart (.9 l)

Yes. Greenlee 90508068 is Greenlee-approved oil compounded specifically for use with Greenlee hydraulic equipment, so it covers hydraulic pumps, punch drivers, benders and cutters in the Greenlee line. It is refinery-filtered, which matters on hydraulic tools because particulate is what scores pump seals and plugs relief valves. Part number 90508068, one quart.

Yes, down to well below freezing. The pour point is -55F (-48C), so the oil is still able to flow in winter conditions, which is the spec that decides whether a hand pump will build pressure on a cold morning. If tools sit in an unheated service truck overnight, this is the relevant number.

One quart (about 0.9 liter) in a plastic container. That is a top-off and refill size rather than a bulk drum, so for a single hand pump or a small electric pump reservoir it is usually enough for a fill plus spare for bleeding air out of the hose and ram.

Stock Greenlee part number 90508068, the one-quart Greenlee-approved hydraulic oil, as the consumable for the hydraulic tool fleet. A quart per pump plus spares covers routine top-offs and post-repair refills, and standardizing on the single approved oil across the shop stops crews mixing fluids between tools.

Flash point is 350F (177C). For a facility that has to log flammability data for storage cabinets or a safety data file, that puts it well above ambient and above normal hydraulic operating temperatures, so it is not a low-flash solvent-type fluid. VOC content is 36.05 at 100F.

Specific gravity is 0.876, so it is lighter than water and any water that gets into a reservoir will settle below it, which is why you drain from the bottom when servicing. Country of origin is the US.