Ideal Industries 61-627 Non-Co...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$36.52
Ideal Industries 61-627 Non-Contact Voltage Tester, 50-600V AC

Ideal Industries 61-627 Non-Contact Voltage Tester, 50-600V AC

(No reviews yet) Write a Review

Model: 61-627

In Stock (leaves warehouse same day if ordered before 3pm ET)

$36.52
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ideal Industries 61-627 Non-Contact Voltage Tester, 50-600V AC

The Ideal Industries 61-627 is a non-contact, single-range voltage tester designed to detect the presence of AC voltage from 50 to 600 volts without requiring direct contact with energized conductors, outlets, switches, breakers, or wiring. Electricians and maintenance professionals rely on tools like the 61-627 to perform a fast, first-pass safety check before opening panels, pulling wire, or servicing fixtures. Because it operates across a single 50-600V AC range, this tester is built to cover the voltage bands most commonly encountered in residential, commercial, and light industrial electrical work, giving technicians a quick way to confirm whether a circuit is live prior to hands-on testing or lockout/tagout procedures.

Key Features

  • Non-Contact Detection: Senses AC voltage without touching bare conductors, reducing exposure risk during preliminary circuit checks.
  • Voltage Range: Single-range detection from 50 to 600-Volt AC covers the voltage levels typical of branch circuits, panels, and equipment feeders.
  • Fast Go/No-Go Indication: Designed for quick pre-work verification, helping crews confirm de-energized status before proceeding with hands-on tasks.
  • Compact, Portable Form Factor: Sized for pocket or tool-pouch carry so it is on hand for routine circuit checks throughout a job site.
  • Single-Range Simplicity: A single detection range simplifies operation for straightforward yes/no voltage presence testing without range-switching.

Technical Specifications

  • Voltage Rating: 50-600-Volt AC
  • Detection Type: Non-Contact
  • Range Configuration: Single-Range
  • Model: 61-627

Typical Applications

  • Pre-Work Voltage Verification on Panels and Breakers
  • Residential and Commercial Electrical Troubleshooting
  • Receptacle, Switch, and Fixture Circuit Checks
  • Lockout/Tagout Confirmation Support
  • General Maintenance and Service Calls

Why Ideal Industries?

Ideal Industries builds test instruments that electrical professionals depend on for daily field work, and the 61-627 non-contact voltage tester continues that focus on straightforward, reliable tools for identifying live circuits. Its 50-600-Volt AC single-range detection gives technicians a practical first check before hands-on work begins, supporting safer, more efficient electrical maintenance and installation practices.

[{"name": "Product Type", "value": "Voltage Tester"}, {"name": "Voltage Rating", "value": "50-600V AC"}, {"name": "Configuration", "value": "Non-Contact Single-Range"}]

Manufacturer Resources

Product Specs

list_batch:
IDL-20260924
Product Type:
Non-Contact Voltage Tester
Department:
Electrical
Product Subgroup:
Voltage Testers
Product Group:
Test & Measurement

Ideal Industries 61-627 – Frequently Asked Questions

1) Will the Ideal 61-627 detect voltage on a 480V three-phase panel feeder?
Yes. The Ideal 61-627 non-contact tester senses AC voltage from 50 to 600 volts, so 480V feeders fall inside its single detection range. Below 50V AC (low-voltage control, doorbell, thermostat wiring) it will not give you a reliable indication, and anything above 600V AC is outside the range entirely.
2) Can I use a non-contact voltage tester like the 61-627 as my only proof that a circuit is dead before working on it?
No. The 61-627 is a go/no-go presence detector for a fast first-pass check before you open a panel, pull wire, or service a fixture. It tells you whether AC voltage is present, not what the voltage is, and it does not touch the conductor. Use it to screen the circuit, then confirm de-energized status with a contact meter or tester as part of your lockout/tagout procedure.
3) Do I have to switch ranges on the Ideal 61-627 when moving between 120V receptacles and 277V lighting circuits?
No range switching. The 61-627 is a single-range instrument covering 50-600V AC, so the same setting reads a 120V receptacle, a 277V lighting circuit, and a 480V feeder. That is the practical difference from a multi-range tester: fewer steps, but no voltage value, just presence or absence.
4) Will the 61-627 test through a closed outlet cover, switch plate, or insulated wire?
The 61-627 detects AC voltage without direct contact with energized conductors, outlets, switches, breakers, or wiring, which is how it is used for receptacle, switch, and fixture checks and for screening a panel before you open it. Hold it near the device or conductor rather than probing it.
5) Is the Ideal 61-627 an AC-only tester, or will it pick up DC?
AC only. The 61-627 is rated 50-600V AC, so it is not the tool for DC circuits such as battery banks, solar strings, or DC control wiring. For those you need a contact-type meter rated for DC.
6) What is the exact Ideal part number to order for this non-contact voltage tester?
Order Ideal Industries model 61-627. That is both the model designation and the manufacturer part number for the non-contact, single-range 50-600V AC tester, so an MRO or stockroom buyer standardizing on it can reference 61-627 directly.
7) Is this tester practical to issue to a maintenance crew for daily carry?
It is sized for pocket or tool-pouch carry and operates with no range selection, which is why facilities and property maintenance groups hand them out as a standard-issue first-check tool. One range, one indication: voltage present or not.
How fast can I get the Ideal Industries 61-627 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 61-627 come with a warranty?
Absolutely. The Ideal Industries 61-627 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 61-627?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 61-627 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!