Imperial USA TH1190 Intermedia...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$47.02

Imperial USA TH1190 Intermediate Offset Pivot

(No reviews yet) Write a Review

Model: IMPTH1190-LH-AL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$47.02
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Imperial USA TH1190 Intermediate Offset Pivot

Offset door pivots are used for both flush face frame installation and 1/8“ recessed door applications. Door pivots replace most major door manufactures. These door pivots are suitable for aluminum doors weighing up to 125 pounds. These door pivots are engineered and designed for durability, style and are easy to install.

Features:

  • 3/4“ offset pivots for aluminum doors and frames
  • For flush door / frame and 1/8“ recessed door applications
  • Weather resistant
  • Aluminum case construction
  • Vertical adjustment 1/8“
  • Full race ball bearing and design, provides smooth operation on bottom pivot door portion
  • No sag, entire weight of doors rests on floor mounted pivot portion
  • Completely temper proof, yet easily removable, replaceable in unlocked position
  • Top portions available 1110-T non handed
  • All pivots are handed- specify LH, RH

Manufacturer Resources

Product Specs

Subcategory:
Door Pivots
Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Intermediate Pivot
Commercial/Residential:
Commercial
Mounting Method:
Offset
Pivot Style:
Intermediate
Product Model:
TH1190
Product Category:
Door Hinges and Pivots
Department:
Door Hardware

Imperial USA IMPTH1190-LH-AL – Frequently Asked Questions

1) Is the Imperial USA TH1190 offset pivot handed, and how do I order the right one?
Handing matters on the TH1190. Every one of these pivots is handed, so you specify LH or RH at the time of order, and both are offered in aluminum and duronodic finishes. Get the hand wrong and the pivot will not line up with the door's offset side. If you also need the top portion, the 1110-T top is non handed.
2) How much door weight will the TH1190 intermediate pivot carry?
It is rated for aluminum doors up to 125 pounds. The design puts the full door weight on the floor mounted bottom pivot rather than on the intermediate, which is what keeps the door from sagging over time.
3) Will a 3/4 inch offset pivot work on a flush aluminum storefront door, or do I need a recessed version?
The 3/4 inch offset TH1190 covers both. It is made for flush door and frame installations and for 1/8 inch recessed door applications, on aluminum doors and aluminum frames.
4) What is an intermediate pivot for, and do I need one in addition to a top and bottom pivot?
An intermediate pivot is the middle point of a three-point pivot set. The TH1190 is the intermediate unit only, so it works alongside a bottom (floor) pivot and a top pivot such as the non handed 1110-T top portion. On a tall or heavy aluminum door, the intermediate keeps the stile aligned between the top and bottom points.
5) Will the TH1190 replace the pivots already on my aluminum door?
These offset pivots are built to replace the pivots used by most major door manufacturers in flush or 1/8 inch recessed aluminum door applications. Confirm your existing pivot is a 3/4 inch offset type and match the hand, since the unit is handed LH or RH.
6) Can I adjust door height after the TH1190 pivots are installed?
There is 1/8 inch of vertical adjustment built in, which is usually enough to pick up a dropped door or even a sweep gap without pulling the pivot out.
7) Is this pivot suitable for an exterior storefront entrance?
Yes. The TH1190 is a commercial offset pivot with an aluminum case and weather resistant construction, so exterior aluminum entrances are the intended use.
8) Can the pivot be removed later without taking the door apart, and is it secure?
The TH1190 is tamper proof in the locked position but can be removed and replaced with the door unlocked, so service on a storefront does not mean dismantling the opening.
9) What finishes does the TH1190 offset pivot come in to match my existing storefront hardware?
Two finishes: AL aluminum and DU duronodic (dark bronze tone). Both are available in left hand and right hand, so you can standardize finish across a building and still order the correct hand per opening.
How fast can I get the Imperial USA IMPTH1190-LH-AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Imperial USA IMPTH1190-LH-AL come with a warranty?
Absolutely. The Imperial USA IMPTH1190-LH-AL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Imperial USA IMPTH1190-LH-AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Imperial USA IMPTH1190-LH-AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.