You may also like
INS NYL FORK TERM 12-10 BH No6 YELL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Yellow
- Product Material:
- Copper
Sta-Kon RC1113 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RC1113 fork terminal crimp?
The RC1113 is sized for 12-10 AWG conductor. Yellow insulation is the standard color code for that range, so a yellow barrel on a terminal strip is a quick visual check that the right gauge went in. Run it with the yellow crimp die nest on your tool; using a red (22-16) or blue (16-14) nest will under-crimp the barrel.
2) What screw size does this fork terminal fit?
It is a No. 6 stud fork terminal, so it slips over a #6 screw or stud on a terminal block, relay base, or device screw. The open fork lets you land the wire without pulling the screw all the way out, which is why these get used on control panels and lighting ballasts where screws are captive.
3) Is the Sta-Kon RC1113 UL listed?
It is built under UL file E9809. That is the detail an institutional or MRO inspector asks for when terminations are going into a panel that has to pass a plan review.
4) Should I use a fork terminal or a ring terminal for panel wiring?
Pick the fork when the screw cannot be removed easily or when you expect to service the connection: the open slot slides under a loosened #6 screw head. Pick a ring when the connection is subject to vibration or when a spec calls for a captive termination, because a fork can back out if the screw loosens. The RC1113 is the fork version for 12-10 AWG on a No. 6 stud.
5) What is the barrel made of, and will it work on aluminum conductor?
The barrel is copper, so it is intended for copper conductor only. Crimping copper terminals onto aluminum wire creates a dissimilar-metal joint that corrodes and loosens; for aluminum you need a terminal specifically rated AL or AL9CU.
6) Is the insulation on this terminal nylon or vinyl, and does that matter?
Nylon. It takes more abuse during pull-in and handles higher temperatures better than PVC, which is why nylon-insulated terminals are the usual choice inside enclosures and junction boxes where conductors get flexed and bundled.
7) Is the Sta-Kon RC1113 made in the USA?
Country of origin is the United States. That matters on government, federal, and some institutional jobs carrying domestic-content requirements.
8) What is the exact part number I should order for this yellow 12-10 AWG fork terminal?
Order Sta-Kon RC1113. That is the manufacturer part number for the nylon insulated, yellow, 12-10 AWG, No. 6 stud fork terminal.
How fast can I get the Sta-Kon RC1113 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RC1113 come with a warranty?
Absolutely. The Sta-Kon RC1113 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RC1113?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RC1113 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.