You may also like
INS VIN RING TERM 16-14 HVDTY No10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Vinyl Insulated Heavy-Duty Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 16-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Green
- Product Material:
- Copper
Sta-Kon 14RBC-10 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon 14RBC-10 ring terminal crimp onto?
The 14RBC-10 is sized for 16-14 AWG conductors. The green vinyl insulation is the color code for that range, so if you're pulling 12 AWG or 18 AWG you need a different terminal in the series, not this one.
2) Is this ring terminal rated for 600 volt control and power circuits?
Yes. The 14RBC-10 carries a 600 V rating and is UL listed under file E9809, which covers it for typical 120/208/277/480 V panel and control wiring as well as low voltage work.
3) Why choose a ring terminal instead of a fork or spade terminal on a 16-14 AWG lead?
A ring terminal has to be slipped over the stud, which means the connection can't back off the screw if the fastener loosens. A fork or spade slides out sideways and is quicker to service, but it is the wrong choice on vibrating equipment or anywhere a code-mandated captive connection is expected. The 14RBC-10 is the ring version for 16-14 AWG on a No. 10 stud.
4) Can I use the 14RBC-10 on aluminum conductors?
No. The barrel is copper, so it's a copper-only connector. Aluminum branch or feeder conductors require an AL/CU rated lug with the appropriate inhibitor compound.
5) Are Sta-Kon 14RBC-10 terminals made in the USA for buy-American jobs?
Country of origin on the 14RBC-10 is the United States, which is what most federal, military and transit specs are looking for on domestic-content electrical material.
6) What does the heavy-duty version of this Sta-Kon ring terminal give you over a standard one?
It is the heavy-duty construction in the 16-14 AWG range, meaning a thicker copper barrel and tongue than the standard-duty equivalent. That matters where the lug sees repeated removal, higher mechanical load at the stud, or vibration. Electrically it is the same 600 V class of connector.
7) Does the vinyl insulation on this terminal cover the wire strands after crimping?
Yes. The insulated sleeve on the 14RBC-10 extends back over the barrel and onto the conductor insulation, so there's no exposed copper at the crimp. That is what lets you land several of these side by side on a crowded terminal strip without added sleeving or tape.
8) What part number do I order for a green No. 10 insulated ring terminal from Sta-Kon?
Order Sta-Kon 14RBC-10. That is the manufacturer part number for the green vinyl insulated heavy-duty ring terminal, 16-14 AWG, No. 10 stud.
How fast can I get the Sta-Kon 14RBC-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 14RBC-10 come with a warranty?
Absolutely. The Sta-Kon 14RBC-10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 14RBC-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 14RBC-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.