You may also like
Klein Tools D213-9NE-CR-INS Cutting Crimping Pliers, Insulated, 9-Inch
Model: KLN-D213-9NE-CR-INS
Cutting Crimping Pliers, Insulated, 9-Inch
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because moisture, films, or other surface...
Klein Tools
$179.84
$129.84
Klein Tools HD213-9NE Heavy Duty Lineman's Pliers, 9-Inch
Model: KLN-HD213-9NE
Heavy Duty Lineman's Pliers, 9-Inch
Warnings
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Always wear approved eye protection...
Klein Tools
$113.30
$63.30
Klein Tools D20009NEINS Insulated Lineman's Pliers, 9-Inch
Model: KLN-D20009NEINS
Insulated Lineman's Pliers, 9-Inch
Features
High-leverage design provides 46-Percent greater cutting and gripping power than other plier designs
Precision machined knives cut cleanly and crisply...
Klein Tools
$180.61
$130.61
Klein Tools D213-9NE-INS Side Cutting Pliers, New England Insulated, 9-Inch
Model: KLN-D213-9NE-INS
Side Cutting Pliers, New England Insulated, 9-Inch
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Wear approved eye protection.
Because...
Klein Tools
$163.61
$113.61
Klein Tools D2000-9NETP Lineman's Pliers, Fish Tape Pulling, 9-Inch
Model: KLN-D2000-9NETP
Lineman's Pliers, Fish Tape Pulling, 9-Inch
Warnings
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Always wear approved eye...
Klein Tools
$123.03
$73.03
Insulated Lineman's Pliers, 9-Inch
D2000-9NE-INS - spec sheet
Features
- Integral guards help prevent hand contact with conductive parts
- High-leverage design provides 46-Percent greater cutting and gripping power than other plier designs
- Cuts ACSR, screws, nails, and most hardened wire
- Two layers of insulation provide protection against electric shock
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool and a flame retardant, impact-resistant, bright orange outer coating
- Pliers are individually tested to meet or exceed the ASTM F1505-16(2021) and IEC 60900 -2018 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Made in USA
Warnings
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Wear approved eye protection. Always inspect your tools before use.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
D2000-9NE-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Side-Cutting
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Insulated:
- Yes
- Item Depth:
- 9.6250 in
- Item Height:
- 0.6250 in
- Item Weight:
- 1.2500 lbs
- Item Width:
- 4.6250 in
- Jaw Capacity:
- 1.43" (3.6 cm)
- Jaw Length:
- 1.594" (4 cm)
- Jaw Thickness:
- 0.6" (1.5 cm)
- Jaw Width:
- 1.25" (3.2 cm)
- Joint Type:
- Hot-Riveted
- Knife Length:
- 0.781" (2 cm)
- Material:
- Induction Hardened Steel
- Nose Type:
- New England
- Overall Length:
- 9.68" (24.6 cm)
- Standards:
- IEC 60900 and ASTM F1505
- Type:
- Side Cutting Pliers
- Weight:
- 1.3 lb (0.6 kg)