You may also like
Klein Tools D203-8N Pliers, Needle Nose Side Cutters with Stripping, 8-Inch
Model: KLN-D203-8N
Pliers, Needle Nose Side Cutters with Stripping, 8-Inch
Warnings
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Always wear...
Klein Tools
$101.93
$51.93
Klein Tools D203-7-INS Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
Model: KLN-D203-7-INS
Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
Warnings
Wear approved eye protection.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because...
Klein Tools
$131.16
$81.16
Klein Tools D203-8-INS Long Nose Pliers, Insulated, 8-Inch
Model: KLN-D203-8-INS
Long Nose Pliers, Insulated, 8-Inch
Warnings
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Always inspect your tools before use...
Klein Tools
$147.40
$97.40
Klein Tools D203-6H2 Pliers, Needle Nose Side-Cutters, Stripping, 6-Inch
Model: KLN-D203-6H2
Pliers, Needle Nose Side-Cutters, Stripping, 6-Inch
Features
Plastic-dipped handles for comfort and ease of identification
Forged in the USA with custom, US-made tool steel for maximum...
Klein Tools
$103.56
$53.56
Insulated Long Nose Pliers, Side-Cutting/Stripping
D203-8N-INS - spec sheet
Warnings
- Wear approved eye protection.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Features
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Hot-riveted joint for smooth action and no handle wobble
- Forged in the USA with custom, US-made tool steel for maximum durability
- Extended handles provide added reach and leverage
- Heavier design for easier, more comfortable cutting
- Flame Retardant and Impact Resistant Handle
- Flame retardant, impact-resistant, bright orange outer coating and clearly marked with the official 1000-volt rating symbol
- Durable molded insulation meets or exceeds ASTM F1505-16 and IEC 60900 -2018 standards for insulated tools
- Integral guards help prevent hand contact with conductive parts
- Pliers have two layers of insulation to provide protection against electric shock
- Features a stripping hole for 12 AWG solid insulated wire and side-cutting knives at the hinge
D203-8N-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Side-Cutting and Skinning
- Cutting Knives:
- Standard
- Depth:
- 8.8750 in
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 4.79" (12.2 cm)
- Height:
- 0.5000 in
- Insulated:
- Yes
- Jaw Capacity:
- 2.36" (6 cm)
- Jaw Length:
- 2.32" (5.9 cm)
- Jaw Thickness:
- 0.5" (1.3 cm)
- Jaw Width:
- 1.02" (2.6 cm)
- Joint Type:
- Hot-Riveted
- Knife Length:
- 0.693" (1.8 cm)
- Material:
- Induction Hardened Steel
- Overall Length:
- 8.91" (22.6 cm)
- Point Diameter:
- 0.125" (0.32 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Long Nose
- Weight:
- 0.7000 lbs
- Width:
- 4.7500 in