Pliers, Needle Nose Side-Cutters, Stripping, 8-Inch
J203-8N - spec sheet
Warnings
- NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
- Always wear approved eye protection.
Features
- Color-coded handles allow quick identification of tool
- Cleanly strips 12 AWG solid wire
- Hard, black material for toughness and durability
- Pliers with induction-hardened cutting knives for long life
- Heavier design for greater cutting power
- Hot-riveted joint ensures smooth action and no handle wobble
- Forged in the USA with custom, US-made tool steel
J203-8N - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Handle Color:
- Yellow/Black
- Handle Finish:
- Journeyman™ Dual-Material
- Handle Length:
- 4.45" (11.3 cm)
- Jaw Capacity:
- 2.36" (6 cm)
- Jaw Length:
- 2.32" (5.9 cm)
- Jaw Thickness:
- 0.5" (1.3 cm)
- Jaw Width:
- 1.02" (2.6 cm)
- Knife Length:
- 0.693" (1.8 cm)
- Overall Length:
- 8.42" (21.4 cm)
- Point Diameter:
- 0.125" (0.32 cm)
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Pliers & Cutters
- Product Height:
- 0.5000 in
- Product Weight:
- 0.6400 lbs
- Product Width:
- 4.0000 in
- Product Depth:
- 8.5630 in
- Product Type:
- Long Nose Pliers
- Country Of Origin:
- United States
Klein Tools J203-8N – Frequently Asked Questions
1) Can the Klein J203-8N needle nose pliers be used on live electrical circuits?
No. The J203-8N is NOT insulated. The plastic-dipped Journeyman dual-material handles are there for grip and comfort, not shock protection, and Klein states plainly they are not intended for protection against electrical shock. For energized work you need a tool rated and marked as insulated. Eye protection should be worn whenever you cut with it.
2) What wire size will these Klein needle nose pliers strip?
The J203-8N has a built-in stripping hole that cleanly strips 12 AWG solid wire. It is a single-size stripper, not a multi-gauge stripping tool, so if you work across a range of gauges on the same job you will still want a dedicated stripper alongside it. The side-cutting knives are induction-hardened and measure 0.693 inch long.
3) How fine are the tips on the Klein J203-8N - will they reach into a crowded device box?
The nose tapers to a 0.125 inch point diameter over a 2.32 inch jaw, so it will get into a packed 4-square or device box to hook a conductor or form a loop around a screw terminal. Jaw thickness is 0.5 inch and jaw width 1.02 inch at the base, which is a heavier build than a typical electronics needle nose.
4) Should I buy needle nose side-cutting pliers like the J203-8N or a plain long nose plier?
Pick the J203-8N if you want one tool that reaches, cuts and strips. It combines a tapered needle nose for reaching and looping, side-cutting knives for trimming conductors, and a 12 AWG stripping hole. A plain long nose with no side cutter means carrying a separate cutter. What it will not replace is a multi-gauge wire stripper or an insulated tool for energized work.
5) What is the exact part number to order for the Klein 8-inch needle nose stripping plier?
Order Klein Tools J203-8N. That is the single model, an 8-inch needle nose side-cutting plier with a stripping hole, no finish or size variations to specify.
6) What is the actual length and weight of the Klein J203-8N for a tool pouch or service kit?
Overall length is 8.42 inches with a 4.45 inch handle, and the tool weighs 0.64 lbs. That is a full-size, heavier-built plier rather than a pocket tool, so plan on a standard plier slot in the pouch.
7) How wide can the jaws open on these Klein long nose pliers?
Jaw capacity is 2.36 inches, so the jaws spread wide enough to grip a cable bundle, a locknut, or a small conduit body rather than just single conductors. The hot-riveted joint keeps the action smooth with no handle wobble as it opens and closes.
8) Is the Klein J203-8N made in the USA?
Yes, it is forged in the USA from custom US-made tool steel, with the cutting knives induction-hardened for service life. The yellow and black color-coded Journeyman handles also make it quick to pick your own tool out of a shared gang box.
How fast can I get the Klein Tools J203-8N delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools J203-8N come with a warranty?
Absolutely. The Klein Tools J203-8N is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools J203-8N?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools J203-8N from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.