You may also like
Klein Tools 646-1/4-INS Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft
Model: KLN-646-1/4-INS
Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft
Warnings
Wear approved eye protection. Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Do NOT touch...
Klein Tools
$81.10
$31.10
Klein Tools 646-1/2 1/2-Inch Nut Driver with 6-Inch Hollow Shaft
Model: KLN-646-1/2
1/2-Inch Nut Driver with 6-Inch Hollow Shaft
Warnings
Always wear approved eye protection.
NOT insulated. Will NOT protect against electrical shock.
Features
Handle end is also color coded for...
Klein Tools
$66.23
$16.23
Klein Tools 646-5/16-INS 5/16-Inch Insulated Nut Driver with 6-Inch Shank
Model: KLN-646-5/16-INS
5/16-Inch Insulated Nut Driver with 6-Inch Shank
Warnings
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Only use tools that are...
Klein Tools
$80.81
$30.81
Klein Tools 646-9/16-INS 9/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Model: KLN-646-9/16-INS
9/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Features
Cushion-Grip™ handles for greater torque and comfort
Tip-Ident Quickly Identifies Nut Driver Size
Hollow shafts make it possible to work...
Klein Tools
$92.16
$42.16
Klein Tools 646-1/2M 1/2-Inch Magnetic Tip Nut Driver 6-Inch Shaft
Model: KLN-646-1/2M
1/2-Inch Magnetic Tip Nut Driver 6-Inch Shaft
Features
Cushion-Grip™ handle allows for greater torque and comfort and handle dome is color coded for easy identification
Internal flanges provide...
Klein Tools
$72.71
$22.71
Insulated Nut Driver, 1/2-Inch Hex, 6-Inch
646-1/2-INS - spec sheet
Features
- Tip-Ident Quickly Identifies Nut Driver Size
- Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
- Two layers of insulation provide protection against electric shock
- Cushion-Grip™ handles for greater torque and comfort
- Tip-Ident quickly identifies nut driver size
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
- Made in USA
- Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
Warnings
- Wear approved eye protection.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
646-1/2-INS - spec sheet
Manufacturer Resources
Product Specs
- Color Code:
- Red
- Depth:
- 11.3750 in
- Handle Material:
- High-Dielectric Plastic
- Height:
- 1.0000 in
- Insulated:
- Yes
- Magnetic:
- No
- Material:
- Steel
- Measurement Standard:
- SAE
- Nut Driver Sizes:
- 1/2"
- Overall Length:
- 11.375" (28.9 cm)
- Shaft Length:
- 6" (15.2 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Hollow
- Weight:
- 0.3500 lbs
- Width:
- 1.0000 in