Klein Tools 6037INS Insulated ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$86.04
$25.03
Klein Tools 6037INS Insulated Screwdriver, #2 Phillips, 7-Inch Round Shank

Klein Tools 6037INS Insulated Screwdriver, #2 Phillips, 7-Inch Round Shank

(No reviews yet) Write a Review

Model: 6037INS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$86.04
$25.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Insulated Screwdriver, #2 Phillips, 7-Inch Round Shank

  • Warnings

    • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
    • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
    • Do NOT use to pry or chisel.
    • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
    • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
    • Wear approved eye protection.
    • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

  • Features

    • Flame Retardant and Impact Resistant Handle
    • Custom US-made tool steel
    • Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
    • Made in the USA
    • 1000V Rated for safety
    • Cushion-Grip™ handle for greater torque and comfort


6037INS - spec sheet

Manufacturer Resources

Product Specs

Handle Material:
High-Dielectric Plastic
Insulated:
Yes
Item Depth:
11.3130 in
Item Height:
1.0000 in
Item Weight:
0.2500 lbs
Item Width:
1.0000 in
Magnetic:
No
Overall Length:
11.313" (28.7 cm)
Shank Length:
7" (17.8 cm)
Shank Type:
Round
Standard:
IEC 60900 and ASTM F1505
Tip Size:
#2
Tip Type:
Phillips
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Induction Hardened Steel
Product Weight:
4.0 oz (113 g)
Product Type:
Hardware

Klein Tools 6037INS – Frequently Asked Questions

1) Is the Klein 6037INS screwdriver rated for live electrical work at 1000V?
The Klein Tools 6037INS is a 1000V rated insulated screwdriver built to IEC 60900 and ASTM F1505. The insulation is a two-layer molded construction. Klein is explicit about the limits: de-energize lines and equipment whenever possible, since insulated tools only reduce the chance of injury on contact with an energized source. Don't touch the uninsulated portion of the tool, keep it clean and dry (moisture and surface films conduct), and destroy the tool if the insulation is damaged in any way.
2) Is the Klein 6037INS Phillips screwdriver magnetized?
No. The 6037INS has a non-magnetic tip, so it won't hold a screw on the end for you when you're working one-handed inside a box. If you want screw retention on an insulated driver, you'd need a magnetic-tip model or a separate screw holder.
3) Can I use an insulated screwdriver like the Klein 6037INS to pry or scrape?
No. Klein warns specifically against prying or chiseling with this driver. Beyond damaging the tip, any gouge or nick in the molded insulation kills the 1000V protection, and the instruction is to destroy the tool if the insulation is compromised. Inspect it before every use and keep a separate pry tool on the truck.
4) Do I need a 1000V rated screwdriver for panel and live-circuit work, or is a standard one fine?
If there is any chance the tool contacts an energized source, Klein's own guidance is to use only tools marked with the official international 1000-volt rating symbol. That is what separates the 6037INS from a standard #2 Phillips: the same induction hardened steel shank, but with two-layer molded insulation certified to IEC 60900 and ASTM F1505. For work on circuits you have confirmed dead and locked out, a standard driver is fine; for anything energized or potentially energized, the insulated version is the one that belongs in your hand.
5) What is the Klein 6037INS handle and shaft made of?
The shaft is induction hardened US-made tool steel, and the handle is a high-dielectric plastic that is flame retardant and impact resistant, with Klein's Cushion-Grip for torque and comfort. The tool is made in the USA.
How fast can I get the Klein Tools 6037INS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 6037INS come with a warranty?
Absolutely. The Klein Tools 6037INS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 6037INS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 6037INS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!