You may also like
International Door Closers FP-4511 Flat Faceplate for DL-4510 Deadlatch Lock
Model: IDC-FP-4511
International Door Closers FP-4511 Flat Faceplate for DL-4510 Deadlatch Lock
Front Size 1" x 6-7/8"
For Use With Deadlatch Lock (DL-4510)
Product Width 1 Inch
Product Length 6-7/8 Inch
Series FP-4510...
International Door Closers
$12.59
Calibre Door Closers LH4000 Lever Handle with Cam Plug
Model: CDCLH4000
Calibre Door Closers LH4000 Lever Handle with Cam Plug
Features:
Handicap (ADA) multi-sized closers with adjustable spring power for a range of sizes after installation.
Underwriters’ Laboratories...
Calibre Door Closers
$45.00
$37.41
Adams Rite 4560 Series Deadlatch Lever Handle with ADA Compliant Design
Model: ADA-4560
Adams Rite 4560 Series Deadlatch Lever Handle with ADA Compliant DesignProfessional Deadlatch Operating Handle for Narrow Stile ApplicationsThe Adams Rite 4560 Series Deadlatch Lever Handle provides...
Adams Rite
Starting at
$71.94
$36.63
International Door Closers DL-4511 Deadlatch Lock with Flat Faceplate
Model: IDC-DL-4511
International Door Closers DL-4511 Deadlatch Lock with Flat Faceplate
DL-4510 Deadlatch lock
CYLINDER BACKSET AVAILABLE: - 31/32” and 1-1/8”
Field reversible for opposite hand
Key controlled...
International Door Closers
Starting at
$46.32
International Door Closers HL-4560 Lever Handle With Cam Plug, Field Reversible, For Use With DL-4510 Deadlatch
Hand
Field Reversible
Features
Cam Plug; Field Reversible
For Use With
DL-4510 Type Latch Lock
Series
Parts/Accessories
Function
Part/Component
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Parts And Accessories
- Product Type:
- Lever Handle
- Subcategory:
- Parts And Accessories
- Product Model:
- HL-4560
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
International Door Closers HL-4560-AL – Frequently Asked Questions
1) Do I need to order the HL-4560 lever handle by hand, left or right?
No handing to specify. The HL-4560 is field reversible, so one part covers both left and right hand doors and the installer sets the hand on site. For a locksmith carrying stock on the truck, that means one lever per finish instead of a pair.
2) Can I replace just the broken lever on my storefront door instead of the whole latch?
That's exactly what the HL-4560 is. It's a lever handle component, not a complete lockset, so if the DL-4510 deadlatch in the door still works and only the handle is bent, sheared, or worn, this swaps in and the latch stays put. Pick the finish to match, AL aluminum or DU storefront bronze.
3) Is the Imperial USA TH1100 lever handle a direct substitute for the International Door Closers HL-4560?
They are both lever handles for door hardware, but they differ in how handing is settled. The HL-4560 is field reversible, so one part covers a left-hand or right-hand opening and the handing is set during installation. The Imperial USA TH1100 Series lever handle is supplied as a left hand part, so the handing is fixed at the time you order and a right-hand opening needs the opposite hand. The HL-4560 is also built for use with the DL-4510 type latch lock and carries a cam plug, so if the opening has that deadlatch the HL-4560 is the handle matched to it.
4) What is the cam plug on the HL-4560 lever handle for?
The cam plug is what drives the DL-4510 deadlatch when the lever is turned, and it ships as part of the HL-4560. It's the piece that couples the handle to the latch mechanism, so you're not sourcing it separately when you replace a broken lever.
5) What other lever handle options are there for a storefront entrance door?
The Imperial USA TH1100 Series lever handle is the other storefront lever we carry. It's ordered by hand, the left hand version being a separate part, so it's a different ordering decision than the HL-4560, which is field reversible and covers both hands from one item. The HL-4560 is the one to use when the door already has a DL-4510 deadlatch.
6) If I am stocking lever handles for a mix of left and right hand doors, do I need to order both hands?
It depends which lever you standardize on. The HL-4560 is field reversible, so a single part number serves both hands and you stock one item instead of two, choosing between the AL aluminum and DU storefront bronze finishes. The Imperial USA TH1100 Series lever handle is a left hand part, so a stocking program built on that series has to account for hand at the point of order. For a property manager or MRO buyer carrying spares across a building, the reversible HL-4560 keeps the shelf to one SKU per finish.
How fast can I get the International Door Closers HL-4560-AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the International Door Closers HL-4560-AL come with a warranty?
Absolutely. The International Door Closers HL-4560-AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the International Door Closers HL-4560-AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the International Door Closers HL-4560-AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.