Irwin 15150 Classic Series Car...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$18.30
Irwin 15150 Classic Series Carbide Table / Miter Circular Saw Blade, 8 1/4-Inch, 24T

Irwin 15150 Classic Series Carbide Table / Miter Circular Saw Blade, 8 1/4-Inch, 24T

(No reviews yet) Write a Review

Model: 15150

In Stock (leaves warehouse same day if ordered before 3pm ET)

$18.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Irwin 15150 Classic Series Carbide Table / Miter Circular Saw Blade, 8 1/4-Inch, 24T

The Irwin 15150 Classic Series Carbide Table / Miter Circular Saw Blade is engineered to deliver professional-grade cutting performance for table saws and miter saws on the job site or in the shop. This 8 1/4-Inch diameter blade features a 24-tooth carbide-tipped design, with each tooth precision-ground for smooth, accurate cuts across a wide range of framing and construction materials. A corrosion-resistant coating helps protect the blade body from rusting, extending usable life even in demanding work environments. As part of the IRWIN Classic Series lineup, the 15150 blade is built to offer professional performance at an economical price, giving contractors and DIYers alike a dependable option for everyday cutting tasks without a premium price tag.

Key Features

  • Trade Size: 8 1/4-Inch blade diameter sized to fit standard table saws and miter saws for versatile use across common job-site equipment.
  • 24-Tooth Configuration: The 24-tooth carbide layout is ideally suited for framing, ripping, and deck jobs where fast, efficient material removal matters most.
  • Carbide-Tipped Teeth: Precision-ground carbide teeth stay sharper longer and deliver smooth, accurate cuts pass after pass.
  • Corrosion-Resistant Coating: A protective coating helps prevent rusting, keeping the blade body performing reliably through repeated use and storage.
  • Classic Series Design: Part of the IRWIN Classic Series, this blade is engineered to deliver professional-level cutting performance at an economical price point.
  • Dual Application Use: Designed for both table saw and miter saw setups, offering flexibility for framing, ripping, and general deck construction work.

Technical Specifications

  • Claims Needed: No
  • Battery Included: No
  • Country of Origin: China
  • Power Source: Non-Energy Using

Typical Applications

  • Framing and Structural Carpentry
  • Ripping Lumber to Width
  • Deck Construction and Repair
  • Table Saw Cutting Tasks
  • Miter Saw Cutting Tasks
  • General Job-Site and Shop Woodworking

Why Irwin?

Irwin's Classic Series blades pair carbide-tipped, precision-ground teeth with a corrosion-resistant coating to deliver smooth, accurate cuts on framing, ripping, and deck projects. The 15150 blade brings that same professional-grade construction to an economical price point, making it a practical, dependable choice for contractors and DIYers running table saws and miter saws on demanding job sites.

Manufacturer Resources

Product Specs

list_batch:
IRW-20260923
Product Type:
Circular Saw Blade
Series:
Classic Series
Configuration:
24-Tooth
Department:
Electrical
Product Subgroup:
Saw Blades
Product Material:
Carbide
Product Size:
8 1/4-Inch
Product Group:
Power Tools & Accessories
Product Width:
9.1 in
Product Weight:
0.892 lb
Product Length:
10.1 in
Product Height:
0.2 in

Irwin 15150 – Frequently Asked Questions

1) Will the Irwin 15150 saw blade fit my 8-1/4 inch miter saw or table saw?
The Irwin 15150 is an 8-1/4 inch diameter blade built for both table saws and miter saws, so it drops onto any saw specified for that trade size. Match the arbor on your saw before you order, since the blade diameter is the only size figure stated for the 15150.
2) Is a 24-tooth blade right for framing and ripping, or do I need more teeth?
Twenty-four teeth is the framing and ripping count. The Irwin 15150 carries a 24-tooth carbide layout aimed at fast material removal on framing, ripping lumber to width, and deck work. If you are cutting finish trim, plywood veneer, or melamine where tear-out shows, you want a higher tooth count blade instead. For structural carpentry and deck boards, 24T cuts faster and loads the saw less.
3) Are the teeth on the Irwin 15150 carbide or just hardened steel?
Carbide. The 15150's teeth are carbide-tipped and precision ground, which is why it holds an edge through repeated framing passes rather than dulling like a plain steel-tooth blade. The blade body also carries a corrosion-resistant coating to keep it from rusting in a damp truck box or unheated shop.
4) What is the exact part number to reorder the Irwin 8-1/4 inch 24T blade?
Order Irwin model 15150, from the Classic Series line. That one number covers the 8-1/4 inch, 24-tooth carbide table and miter blade, so it is what a distributor or purchasing office should put on the PO.
5) Can I use the Irwin 15150 blade to cut metal or masonry?
No. The 15150 is a wood-cutting blade, specified for framing, ripping lumber, deck construction, and general job-site and shop woodworking. Cutting steel, masonry, or fiber cement calls for a blade made for that material, not a 24-tooth carbide wood blade.
6) Is the Irwin Classic Series good enough for daily contractor use, or is it a homeowner blade?
Classic Series sits at the economical end of Irwin's lineup while still using carbide-tipped, precision-ground teeth and a rust-resistant body coating. That is a practical pick for a crew burning through framing and deck cuts where blades take abuse and get replaced on a cycle. For fine cabinet work, step up to a higher tooth count.
7) Where is the Irwin 15150 blade made?
The 15150 is manufactured in China. That matters for buyers working under domestic-sourcing or Buy American procurement rules, who will need a different blade to satisfy the requirement.
How fast can I get the Irwin 15150 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Irwin 15150 come with a warranty?
Absolutely. The Irwin 15150 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Irwin 15150?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Irwin 15150 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!