Irwin 18907 Series Straight Sh...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.86
Irwin 18907 Series Straight Shank Wood Installer Drill Bit, 1/4-Inch

Irwin 18907 Series Straight Shank Wood Installer Drill Bit, 1/4-Inch

(No reviews yet) Write a Review

Model: 1890707

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Irwin 18907 Series Straight Shank Wood Installer Drill Bit, 1/4-Inch

The Irwin 18907 Series Straight Shank Wood Installer Drill Bit is a 1/4-Inch diameter installer bit built for electricians, low-voltage installers, and contractors who need to run wire through walls, ceilings, and floors. The 18907 Series is offered across multiple models (1890707, 1890709, 1890711) with varying lengths to reach different span depths, while sharing a consistent 82° point, hole-in-flute wire-pulling design, and 3-flatted shank construction. Manufactured from premium high carbon steel, each bit is built for extended drilling life in wood applications and ships in packs of 10 ea for job-ready stocking.

Key Features

  • Diameter: 1/4-Inch diameter is shared across the 18907 Series, sized for running wire through wood framing.
  • Series Length Options: Available in multiple lengths under models 1890707, 1890709, and 1890711 to reach through varying wall, ceiling, and floor cavity depths.
  • 82° Point: Delivers fast, smooth drilling performance in wood for quicker installer work.
  • Hole in Flute: Allows easy wire pulling through walls, ceilings, and floors during electrical and low-voltage installation.
  • 3-Flatted Shank: Prevents slipping in drill chucks and includes a hole for additional wire-pulling capability.
  • Durable Construction: Premium high carbon steel construction extends drilling life in wood applications.
  • Packaging: Supplied 10 ea per pack for job-ready stock.

Technical Specifications

  • Claims Needed: No
  • Individual Vs. Set (Syndigo): INDIVIDUAL
  • Net Lit-Ion Y/N: No
  • Country of Origin: BRA
  • Battery Included: No
  • Power Source: NON-ENERGY USING

Typical Applications

  • Running Electrical Wire Through Walls, Ceilings, and Floors
  • Drilling Wood Framing for Cable and Wire Installation
  • Residential and Commercial Wiring Projects
  • Low-Voltage and Data Cable Installer Applications
  • New Construction and Remodeling Wire Runs

Why Irwin?

Irwin engineers the 18907 Series Installer Bit lineup with premium high carbon steel and a 3-flatted shank designed to resist slipping in drill chucks, giving electrical installers a dependable tool across multiple lengths for wire-pulling tasks on the jobsite. The integrated hole in the flute and shank streamlines wire runs through framing, helping electrical professionals complete installations efficiently without extra tools. Choose Irwin for wood installer bits built for extended drilling life, consistent 82° point performance, and reliable results on residential, commercial, and low-voltage wiring projects.

Manufacturer Resources

Product Specs

Claims Needed:
No
Individual Vs. Set (Syndigo):
INDIVIDUAL
Net Lit Ion Y N:
No
Battery Included:
No
Power Source:
NON-ENERGY USING
list_batch:
IRW-20260923
Product Type:
Wood Boring Bit
Configuration:
Straight Shank
Series:
18907
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Material:
High Carbon Steel
Product Width:
1 inch
Product Group:
Power Tools & Accessories

Irwin 1890707 – Frequently Asked Questions

1) What sizes does the Irwin 18907 installer bit come in, and what are the part numbers?
Three orderable sizes in the 18907 installer bit family: 1/4 in. dia. x 18 in. (MPN 1890707), 3/8 in. dia. x 18 in. (MPN 1890709), and 1/2 in. dia. x 18 in. (MPN 1890711). Pick the diameter off the cable bundle you are pulling, not the drill.
2) Can I use the Irwin 18907 installer bit to drill through steel studs or masonry?
No. The 18907 installer bit is a high carbon steel wood bit with an 82 degree point ground for wood framing. Run it through studs, joists, top plates and floor plates. For steel studs or masonry you need a different bit entirely, as carbon steel will dull or burn immediately in those materials.
3) How does the hole in the flute work for pulling wire through a wall?
After you bore through the framing, you thread the wire or fish line through the hole in the flute and reverse the bit back out, dragging the wire with it. The 3-flatted shank also carries a hole, so you can pull from whichever end you can reach. It saves going back with a fish tape on blind cavity runs.
4) Will the 18907 bit slip in a standard drill chuck?
The shank is straight with three flats ground into it, which gives a three-jaw keyless or keyed chuck something to bite on so the bit does not spin under load. It is not a hex or SDS shank, so it goes in any normal drill or right-angle drill chuck.
5) Is the Irwin 18907 sold individually or in a pack?
These ship 10 each per pack, which suits a shop or service van stocking consumables rather than a one-off purchase. Installer bits in wood get retired regularly once the point dulls, so buying by the pack keeps a crew running.
6) Is an 18 inch installer bit long enough to get through a wall and the top plate?
At 18 inches of overall bit length, you have reach for typical stud bays, single and doubled top plates, and floor plates on standard framing. For deeper runs, drilling down through multiple stacked plates or thick built-up headers, you may need a bit extension or a longer flex bit instead.
7) Which diameter 18907 bit should an electrician use for low-voltage and data cable runs?
For single low-voltage or data drops the 1/4 inch (1890707) usually clears the cable. Bundled Cat6 runs or NM cable generally want the 3/8 inch (1890709), and the 1/2 inch (1890711) gives room for multiple conductors through one bore. All three are 18 inches long, so reach does not change with the size you pick.
8) Does this Irwin installer bit need a battery or any power source of its own?
No. It is a non-energy-using accessory with no battery and no lithium content, so it carries no shipping restrictions on that account. All the power comes from whatever drill you chuck it into.
9) Where is the Irwin 18907 installer bit made?
Country of origin is Brazil. That matters on public and institutional jobs where procurement has to record origin on submittals.
How fast can I get the Irwin 1890707 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Irwin 1890707 come with a warranty?
Absolutely. The Irwin 1890707 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Irwin 1890707?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Irwin 1890707 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!