You may also like
Irwin 222601 Quick-Grip Metal Spring Clamp, Blue, 222 Series
Model: IRW-222601
Irwin 222601 Quick-Grip Metal Spring Clamp, Blue, 222 SeriesThe Irwin Quick-Grip Metal Spring Clamp is a metal-spring clamp from the Irwin 222 Series, engineered to hold workpieces securely without...
Irwin
Starting at
$2.04
Irwin 1964720 Quick-Grip One-Handed 24-Inch Bar Clamp/Spreader, I-Beam
The Irwin Quick-Grip One-Handed Bar Clamp is a 24-Inch, medium-duty clamp built around an I-beam bar that resists flexing and bowing for a straight, dependable clamp line. A pistol-grip handle with a Quick-Release® trigger lets you apply and release up to 300 lbs. of sustained clamping force with a single hand, while removable non-marring pads protect finished workpieces. A quick-change button converts the clamp into a spreader in just a few simple turns, giving woodworkers and DIYers two tools in one.
Key Features
- Trade Size: 24-Inch bar length suits medium-duty clamping and spreading tasks.
- I-Beam Construction: Rigid I-beam bar reduces flexing and bowing under load for a true, even clamp.
- One-Handed Operation: New pistol-grip design and Quick-Release trigger allow simple, one-handed clamping and release.
- Clamping Force: Evenly distributes up to 300 lbs. of sustained clamping force across removable swivel jaws.
- Non-Marring Pads: Removable pads protect workpieces from dents and marks and can be swapped out quickly.
- Clamp-to-Spreader Conversion: A few simple turns of the quick-change button converts the tool from a clamp into a spreader.
Technical Specifications
- Warranty: LLW
- Claims Needed: No
- Prop 65 Generic Warning: No
- Net Lit-Ion Y/N: No
- Battery Included: No
- Charger Included: No
- Country of Origin: Taiwan
- Power Source: Non-Energy Using
Typical Applications
- Woodworking and Furniture Assembly
- Cabinet and Trim Installation
- General Workshop Clamping and Gluing
- Converted Spreading Tasks for Framing and Assembly
- DIY Home Repair and Renovation Projects
Why Irwin?
Irwin's Quick-Grip bar clamp pairs an I-beam bar with a one-handed trigger mechanism so professionals and DIYers alike can work faster without sacrificing clamping force. Non-marring, removable pads and a simple clamp-to-spreader conversion make this a versatile addition to any workshop, backed by Irwin's limited lifetime warranty.
Manufacturer Resources
Product Specs
- list_batch:
- IRW-20260923
- Product Type:
- Bar Clamp
- Department:
- Electrical
- Product Subgroup:
- Clamps
- Product Size:
- 24-Inch
- Product Group:
- Hangers, Supports & Fasteners
- Product Weight:
- 2.278 lb
- Product Height:
- 1.4 in
- Product Width:
- 9 in
- Product Length:
- 31 in
Irwin 1964720 – Frequently Asked Questions
1) How much clamping force does the Irwin 1964720 Quick-Grip bar clamp hold?
The 1964720 applies and holds up to 300 lbs of sustained clamping force, spread evenly across removable swivel jaws. That puts it in medium-duty territory: glue-ups, cabinet and trim work, furniture assembly. For heavy timber or steel fabrication where you need to pull a joint tight against resistance, step up to a heavier clamp.
2) Can the Irwin 1964720 be used as a spreader instead of a clamp?
Yes. A quick-change button converts the tool from a clamp to a spreader in a few turns, so the same bar pushes apart instead of pulling together. That is useful for framing and assembly work where you need to open a joint or hold a gap.
3) Can you operate the Irwin Quick-Grip clamp with one hand while holding the workpiece?
That is the point of the design. A pistol-grip handle with a Quick-Release trigger lets you tighten and release with a single hand, so the other hand stays on the part. For a trim carpenter working alone on a ladder or holding a stile in place, it beats a screw-handle F-clamp that needs two hands.
4) What size opening does the 24-inch Irwin Quick-Grip clamp cover?
It is a 24-inch trade size, meaning the I-beam bar gives you up to roughly two feet of clamping capacity for medium-duty work. Common use is cabinet carcass glue-ups, door and trim assembly, and holding panels while fasteners go in.
5) Will this bar clamp mark finished wood or painted surfaces?
The jaws carry removable non-marring pads specifically to keep dents and marks off finished workpieces. The pads swap out, so if one gets glue-fouled or chewed up you can replace it rather than the clamp.
6) Does an I-beam bar clamp hold straighter than a flat-bar clamp?
The 1964720 uses a rigid I-beam bar rather than a flat bar, which resists flexing and bowing under load. Under a 300 lb pull a thinner flat bar can deflect and cock the jaws out of parallel, which shows up as a gapped or skewed joint. The I-beam keeps the clamp line true.
7) Is the Irwin 1964720 a cordless tool that needs a battery or charger?
No. It is a hand-operated clamp, listed as non-energy using, with no battery or charger involved. Nothing to charge, nothing to add to the order.
8) What is the exact Irwin part number and where is this clamp made?
Order it as Irwin Quick-Grip model 1964720, the 24-inch one-handed bar clamp/spreader. Country of origin is Taiwan.
How fast can I get the Irwin 1964720 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Irwin 1964720 come with a warranty?
Absolutely. The Irwin 1964720 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Irwin 1964720?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Irwin 1964720 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.