Irwin 3220 SDS-Plus Carbide-Ti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.71
Irwin 3220 SDS-Plus Carbide-Tip Hammer Drill Bit, Chrome Vanadium Shaft

Irwin 3220 SDS-Plus Carbide-Tip Hammer Drill Bit, Chrome Vanadium Shaft

(No reviews yet) Write a Review

Model: 322017

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Irwin 3220 SDS-Plus Carbide-Tip Hammer Drill Bit, Chrome Vanadium Shaft

The Irwin 3220 series SDS-Plus Hammer Drill Bits deliver fast, controlled drilling on the jobsite with a carbide tip engineered for controlled starts without walking. Built for all SDS-Plus and Hilti TE-C style rotary hammers, this bit family is available in diameters from 3/16" up to 1" and lengths from 4" up to 10", covering sizes such as 3/16" x 4", 1/2" x 10", 3/4" x 6", and 1" x 8". Every bit in the lineup features a patented flute design that clears debris quickly to reduce clogging and vibration, a short drilling head that minimizes breakout on through-holes, and a chrome vanadium shaft through-hardened to 50-53HrC for durability under repeated impact.

Key Features

  • Size Range: Available in diameters from 3/16" to 1" and lengths from 4" to 10", including 3/16" x 4", 1/4" x 4", 1/4" x 10", 3/8" x 4", 3/8" x 10", 1/2" x 4", 1/2" x 10", 5/16" x 4", 5/8" x 4", 3/4" x 6", 3/4" x 10", and 1" x 8" for precise, repeatable hole sizing.
  • Carbide Tip: Made to ANSI specifications for controlled starts without walking.
  • Chuck Type: SDS-Plus shank fits all SDS-Plus and Hilti TE-C rotary hammers for broad tool compatibility.
  • Durable Construction: Hot isostatically pressed to extend life and resist breakage.
  • Patented Flute Design: Removes dust up to 25% faster than other bits, reducing clogging and vibration.
  • Anti-Bind Design: Reduced area above the flute prevents binding while drilling, allowing use of the full usable length.
  • Chrome Vanadium Shaft: Through-hardened to 50-53HrC for strength and wear resistance.
  • Finish: Copper braze material provides high heat resistance for reduced tip loss; shot-peened, double-tempered finish reduces breakage.

Technical Specifications

  • Warranty: NLW
  • Claims Needed: No
  • Country of Origin: China
  • Battery Included: No

Typical Applications

  • Concrete and Masonry Drilling
  • Anchor and Fastener Hole Preparation
  • Through-Hole Drilling with Reduced Breakout
  • Jobsite Renovation and New Construction Work
  • Use with SDS-Plus and Hilti TE-C Rotary Hammers

Why Irwin?

Irwin engineers the 3220 series SDS-Plus Hammer Drill Bits with a hot isostatically pressed body, a chrome vanadium shaft through-hardened to 50-53HrC, and a shot-peened, double-tempered finish to resist breakage under demanding jobsite conditions. The carbide tip on every size in the lineup is made to ANSI specifications and paired with a copper braze for high heat resistance, helping tradespeople achieve consistent, reliable drilling performance across the full 3/16" to 1" size range in SDS-Plus and TE-C rotary hammers.

Manufacturer Resources

Product Specs

Warranty:
NLW
Claims Needed:
No
Individual Vs. Set (Syndigo):
INDIVIDUAL
Chuck Type:
SDS-Plus
Battery Included:
No
Power Source:
NON-ENERGY USING
list_batch:
IRW-20260923
Product Type:
Masonry Drill Bit
Configuration:
SDS-Plus Shank
Standards:
ANSI
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Material:
Chrome Vanadium Steel
Product Group:
Power Tools & Accessories

Irwin 322017 – Frequently Asked Questions

1) Will an Irwin 3220 SDS-Plus bit fit my Hilti rotary hammer?
Yes. The Irwin 3220 hammer drill bits use an SDS-Plus shank, which fits all SDS-Plus rotary hammers as well as Hilti TE-C style hammers. They will not fit a standard keyed or keyless drill chuck, and they are not SDS-Max.
2) What diameters and lengths do the Irwin 3220 SDS-Plus bits come in?
The 3220 family runs 3/16 inch to 1 inch in diameter and 4 to 10 inches overall length. The orderable sizes are 3/16 x 4, 1/4 x 4, 1/4 x 10, 5/16 x 4, 3/8 x 4, 3/8 x 10, 1/2 x 4, 1/2 x 10, 5/8 x 4, 3/4 x 6, 3/4 x 10, and 1 x 8. Note that not every diameter offers both a short and a long version: 5/16, 5/8 and 1 inch each come in one length only.
3) Can I use an SDS-Plus bit like the Irwin 3220 in a regular hammer drill?
No. An SDS-Plus bit only locks into a rotary hammer's SDS-Plus chuck; it has no round or hex shank for a three-jaw chuck. If your tool is a standard corded or cordless hammer drill, you need a round-shank masonry bit instead. The 3220 is the right choice when you are running a rotary hammer on concrete, block or brick.
4) Which Irwin 3220 size should I use for drilling anchor holes in concrete?
Match the bit diameter to the anchor's stated hole size, then pick a length that exceeds your embedment depth, remembering the listed length is overall and includes the shank. For deeper or through-wall work in a block or poured wall, the 10 inch versions in 1/4, 3/8, 1/2 and 3/4 inch give you the reach; the 4 inch versions suit shallow sleeve and wedge anchor sets. The reduced area above the flute is there to prevent binding so you can use the full usable length of the bit.
5) Is the Irwin 3220 sold as a single bit or in a set?
Each 3220 is an individual bit, ordered by size, not a boxed assortment. For example the 1/2 x 10 inch is part number 322033 and the 3/4 x 6 inch is 322047. Buyers standardizing a crew or a maintenance shop usually stock a few of the common anchor diameters rather than one set.
6) I need to drill 1 inch holes in concrete. Does Irwin's 3220 go that big?
One inch is the top of the 3220 range, available in a single length, 1 x 8 inches, part number 322054. If you need a larger diameter or significantly deeper reach than 8 inches overall, you are into SDS-Max territory and a different bit and hammer.
7) Are these Irwin bits any good for through-holes without blowing out the back face?
That is one of the design points. The 3220 uses a short drilling head to minimize breakout on through-holes, and the patented flute clears dust quickly so the bit does not pack up and stall part way through a wall. Still back off the hammer pressure as the tip breaks through the far face.
8) What is the Irwin 3220 bit shank made of, and how hard is it?
Chrome vanadium steel, through-hardened to 50-53 HRC. The body is hot isostatically pressed, and the finish is shot-peened and double-tempered to resist breakage under repeated hammer impact. The carbide tip is held on with a copper braze for heat resistance so the tip is less likely to shed under load.
9) Does the Irwin 3220 carbide tip meet any standard?
The carbide tip is made to ANSI specifications, which is what gives it a controlled start without walking off the mark on hard concrete. No other rating is claimed for the bit.
How fast can I get the Irwin 322017 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Irwin 322017 come with a warranty?
Absolutely. The Irwin 322017 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Irwin 322017?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Irwin 322017 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!