You may also like
Irwin 2078701 Vise-Grip 2-Piece Pliers Set, 6-Inch Slip Joint and 10-Inch Groove Joint
Model: IRW-2078701
Irwin 2078701 Vise-Grip 2-Piece Pliers Set, 6-Inch Slip Joint and 10-Inch Groove JointThe Irwin Vise-Grip 2078701 ProPlier 2-Piece Pliers Set pairs professional-grade 6-Inch slip-joint pliers with...
Irwin
$22.38
Irwin Vise-Grip Slip Joint Pliers, Nickel Chromium Steel
Irwin Vise-Grip Slip Joint Pliers deliver dependable gripping performance for household, workshop, and general mechanical tasks. Available in 6-Inch and 8-Inch lengths, this family is constructed from durable nickel chromium steel with an induction-hardened cutting edge that stays sharper longer than standard steel edges. Machined jaws and a slip joint design meet or exceed ANSI specifications, and variable-size jaws make these pliers a flexible solution for most household gripping and turning needs. Anti-pinch, non-slip ProTouch Grips add comfort, control, and reduced hand fatigue during extended use, whichever length you choose.
Key Features
- Plier Length: Available in 6-Inch and 8-Inch overall lengths with variable-size jaws, a flexible solution for most household gripping and turning needs.
- Durable Construction: Nickel chromium steel construction resists wear and stands up to repeated use on the job or around the house.
- Induction-Hardened Cutting Edge: The cutting edge is induction hardened, so it stays sharper longer than standard steel edges.
- Slip Joint Design: Machined jaws provide maximum gripping strength, while the slip joint adjusts to a wide range of material sizes.
- Right Angle Teeth: Teeth grip in all directions for maximum bite on nuts, bolts, pipe, and other fasteners.
- ProTouch Grips: Anti-pinch, non-slip handle grips provide comfort, control, and reduced hand fatigue during extended use.
Certifications & Compliance
- Meets or Exceeds ANSI Specifications
Technical Specifications
- Warranty: FLW
- Battery Included: No
- Country of Origin: China
- Available Lengths: 6-Inch, 8-Inch
Typical Applications
- Household Repair and Maintenance Tasks
- Gripping, Turning, and Holding Fasteners and Materials
- General Workshop and DIY Tool Kits
- Plumbing and Mechanical Adjustments
- Automotive and General Mechanical Maintenance
Why Irwin?
Irwin builds its Vise-Grip Slip Joint Pliers from durable nickel chromium steel with an induction-hardened cutting edge and machined jaws, so professionals and DIYers alike get dependable gripping strength that meets or exceeds ANSI specifications across both the 6-Inch and 8-Inch lengths. Right angle teeth grip in all directions for maximum bite, and the anti-pinch, non-slip ProTouch Grips make these pliers comfortable to use through long repair and maintenance jobs. The variable-size slip joint jaws keep every length in this family a flexible, go-to tool for most household needs.
Manufacturer Resources
Product Specs
- Product Type:
- Slip Joint Pliers
- Configuration:
- Slip Joint
- Standards:
- ANSI
- Department:
- Electrical
- Product Subgroup:
- Pliers & Cutters
- list_batch:
- IRW-20260923
- Product Material:
- Nickel Chromium Steel
- Product Group:
- Hand Tools
Irwin 2078406 – Frequently Asked Questions
1) What is the difference between the 6-inch and 8-inch Irwin Vise-Grip slip joint pliers?
Only overall length and the part number. The 6-inch is Irwin 2078406 and the 8-inch is 2078408. Both are nickel chromium steel with machined jaws, right angle teeth, an induction-hardened cutting edge and ProTouch grips. The 8-inch gives more handle leverage and a wider jaw opening range for pipe and larger nuts; the 6-inch fits tighter work and a smaller tool pouch.
2) Are the handles on these Irwin slip joint pliers insulated for electrical work?
No. The ProTouch grips are anti-pinch, non-slip comfort grips, not VDE insulated handles, and nothing in the product data rates them for live work. Treat them as general-purpose pliers for an electrician's pouch and use 1000V-rated insulated pliers for anything energized.
3) Can I cut wire with Irwin Vise-Grip slip joint pliers, or do I need separate cutters?
These slip joint pliers have a cutting edge at the throat of the jaws, and it is induction hardened so it holds an edge longer than plain steel. That handles light wire and soft fasteners during a repair. For repetitive cutting of larger gauge conductors or cable, use dedicated diagonal cutters or a cable cutter instead; a slip joint plier's cutter is a convenience feature, not a production tool.
4) Are slip joint pliers or tongue and groove pliers better for plumbing work?
Slip joint pliers like the Irwin Vise-Grip have two jaw positions and a short opening range, which suits supply nuts, small fittings and general turning. For larger pipe, traps and drain nuts you want tongue and groove (channel-type) pliers, which have many more jaw settings and a much wider capacity while keeping the handles parallel. Keep the slip joint as a general-purpose grip and turn tool and add tongue and groove for anything over about an inch.
5) Do these Irwin pliers meet ANSI requirements for a tool list spec?
The Irwin Vise-Grip slip joint pliers are built to meet or exceed ANSI specifications, and ANSI is the standard carried on the product record for both the 6-inch and 8-inch sizes. That covers the usual MRO and institutional tool list language calling for ANSI-compliant hand pliers.
6) Which Irwin slip joint plier part number should I order to standardize across a maintenance fleet?
Two part numbers cover the range: 2078406 for the 6-inch and 2078408 for the 8-inch. For a standard pouch issue across a property or facility crew, the 8-inch is the usual single-size pick because the extra handle length gives more turning leverage; add the 6-inch where techs work in panels, boxes and tight cabinetry. Both carry the same material, jaw and grip spec, so a mixed fleet is still one spec.
7) Will slip joint pliers round off a nut or bolt head?
Less than smooth-jaw pliers will. The jaws are machined with right angle teeth that bite in all directions, so they hold on nuts, bolts and pipe rather than skidding. They still grip on the flats with teeth, so on a plated or finished fastener you will see marking. For anything you care about cosmetically, or where torque is high, use the correct wrench or socket and keep these for seized, damaged or non-critical fasteners.
8) Is nickel chromium steel durable enough for daily trade use on these pliers?
Nickel chromium steel is the body material, chosen for wear resistance under repeated use, and the cutting edge is separately induction hardened. That is a sound combination for daily maintenance and repair work. Where the tool sees constant hard service, the jaw teeth and the cutter are the wear points to watch, not the frame.
How fast can I get the Irwin 2078406 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Irwin 2078406 come with a warranty?
Absolutely. The Irwin 2078406 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Irwin 2078406?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Irwin 2078406 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.