Name: Ives 507 Rhodes Series Brass Coat and Hat Hook with Decorative Design
Brand: Ives
SKU: 507 626
Price: 35.45 USD
Availability: InStock

Product Overview
FAQs

Ives Rhodes Series Brass Coat and Hat Hook with Decorative Design

Professional Door Hardware Accessory

The Ives Rhodes Series Coat and Hat Hook combines decorative design with functional performance for residential and commercial applications. This surface-mounted brass hook measures 2-5/16" x 1/2" x 3-1/2" and features a decorative design that complements Rhodes Series pulls and levers. Meeting ANSI/BHMA A156.16 standards, this hook is packaged with fasteners for wood applications and provides reliable mounting for coats and hats.

Professional Features & Benefits

Compact Dimensions: 2-5/16" x 1/2" x 3-1/2" size provides efficient mounting without excessive door projection.
Decorative Rhodes Design: Coordinating design complements Rhodes Series pulls and levers for consistent architectural styling.
Surface Mount Installation: Simple surface mounting eliminates complex door preparation requirements.
Complete Hardware Package: Includes fasteners for wood applications for immediate installation capability.
Quality Brass Construction: Brass substrate provides durability and corrosion resistance for long-term performance.
ANSI/BHMA Compliance: Meets ANSI/BHMA A156.16 standards for quality assurance and code compliance.
Versatile Applications: Suitable for office, residential, and personal interior door installations.

Technical Specifications

ANSI/BHMA: ANSI/BHMA 156.16
Commercial/Residential: Residential
Department: Door Hardware
Mounting Location: Surface Mount
Product Category: Door Trim and Accessories
Product Dimension: 2-5/16" x 1/2" x 3-1/2"
Product Group: Door Trim and Accessories
Product Model: 507
Product Subgroup: Coat, Robe and Hat Hooks
Product Substrate: Brass
Product Type: Coat, Robe and Hat Hooks
Subcategory: Miscellaneous Hardware

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

Residential Interior Doors
Office and Commercial Spaces
Personal Interior Door Applications
Coordinated Rhodes Series Installations
Decorative Door Hardware Projects
Multi-Unit Residential Properties
Professional Office Buildings

Why Choose Ives Quality?

Ives door hardware accessories deliver professional-grade reliability with brass construction and ANSI/BHMA A156.16 compliance for quality assurance. The Rhodes Series design provides coordinated styling with matching pulls and levers for complete architectural consistency. Engineered for demanding applications where dependable performance and decorative appeal are essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:: Door Trim and Accessories
Subcategory:: Miscellaneous Hardware
Product Subgroup:: Coat, Robe and Hat Hooks
Product Type:: Coat, Robe and Hat Hooks
ANSI/BHMA:: ANSI/BHMA 156.16
Mounting Location:: Surface Mount
Commercial/Residential:: Residential
Product Model:: 507
Product Dimension:: 2-5/16" x 1/2" x 3-1/2"
Product Category:: Door Trim and Accessories
Product Substrate:: Brass
Department:: Door Hardware

Ives 507 626 – Frequently Asked Questions

1) Does installing the Ives 507 coat hook require drilling through the door or any routing?

No door prep beyond pilot holes. The 507 is a surface mount hook, so it fastens flat to the face of the door, the wall, or a stile, with no bore, no mortise, and no through-hole. For a property manager doing unit turns that means a driver and a couple of screws rather than a template and a router, and on a finished door there is nothing to patch if you ever move it.

2) Do screws come with the Ives 507 hook, and can I put it on a hollow metal door?

The 507 hook ships with fasteners for wood, so a wood door, wood trim, or a solid wood-cored stile is covered out of the box. Because it surface mounts rather than through-bolts, the hook itself does not care what it lands on, but on hollow metal, on a mineral core leaf, or on bare drywall you supply the anchors that suit that substrate. Same brass body either way.

3) What is the closest cross-brand equivalent to the Ives 507 Rhodes coat and hat hook?

The Trimco 3070-1 in the 3070 Series is the closest match by part type: it is also a coat and hat hook rather than a bath robe hook. The Ives 507 is a brass surface-mount coat and hat hook measuring 2-5/16 in. x 1/2 in. x 3-1/2 in. and meets ANSI/BHMA 156.16. If a submittal or a maintenance standard is written around a coat and hat hook specifically, those two are the direct like-for-like candidates; the rest of the comparable hooks are robe hooks from bath hardware lines.

4) I need to hang a coat and a robe from one mounting point - what double hook should I use instead of the Ives 507?

Several double hooks cover that. In solid brass there is the Deltana 88DRH in the 88 Series and the Deltana 55D2010 in the 55D Series, plus the Deltana BBS2010 in the BBS Series. Orca Hardware offers the 4854 Blakely and the 4954 Whidbey double robe hooks in the 48-Blakely and 49-Whidbey series. From Emtek, the 2306 is a sandcast bronze double hook and the 2266 SELECT is a knurled tip double hook with a rosette. All of them put two hooks on a single set of mounting holes, which is the difference that matters when one prep point has to carry two garments.

5) How much space does the Ives 507 coat hook take up, and will a door with one on it still clear a tight closet?

Overall the 507 measures 2-5/16 x 1/2 x 3-1/2 inches. The worst case for swing clearance is the largest of those figures: nothing on the hook can stand off the door face by more than 3-1/2 inches, and the thinnest face of it is a half inch. Measure the gap between the back of the door and whatever it swings toward against that 3-1/2 inch number and you are covered, coat included or not.

6) What finishes is the Ives 507 brass coat hook available in? I need it to match the levers already on the doors.

Five finishes on the 507: 605 bright brass, 613 satin bronze oil-rubbed, 625 bright chrome, 626 satin chrome, and 622 matte black. All five sit on the same brass substrate. If the building is running standard commercial lever hardware, 626 satin chrome is the usual match, with 613 for a dark bronze package and 605 where the existing trim is polished brass.

7) We normally buy the Trimco 3070-1 coat and hat hook. Is the Ives 507 a straight swap?

Same class of part. The Trimco 3070-1 and the Ives 507 are both coat and hat hooks, so functionally you are replacing like with like. What the Ives brings to it: brass substrate, 2-5/16 x 1/2 x 3-1/2 inches overall, built to ANSI/BHMA A156.16, and five finishes. Mounting hole spacing is not standardized from one hook brand to the next, so treat it as a fresh install rather than a drop-in on the old holes, and expect to fill and re-drill if you are swapping on a door face that shows.

8) The Ives 507 is a coat and hat hook for a door. What should I use instead for a bathroom or a locker area where I want a robe hook or a double?

A coat and hat hook hung on a door face is what the 507 is drawn for. If the application is bath or robe hardware, there are purpose-built options in other lines. Doubles: Deltana 55D2010 and Deltana 88DRH, both solid brass, the Deltana BBS2010, the Emtek 2266 SELECT knurled tip double hook with rosette, the Emtek 2306 sandcast bronze double hook, and the Orca Hardware 4854 Blakely and 4954 Whidbey. Singles, if one prong is enough: Emtek 2606 solid brass, Emtek 25050 wrought steel, Deltana BBN2009, and the Orca Hardware 2753 Cypress or 3654 Swirl. The Trimco 7010 fOCAL combines a robe hook with a door stop, which is worth a look where the door also needs holding off the wall.

9) How do I write the part number for an Ives 507 hook in a specific finish?

Finish rides on the end of the model number. 507 605 for bright brass, 507 613 for satin bronze oil-rubbed, 507 625 for bright chrome, 507 626 for satin chrome. Matte black breaks the pattern: it is ordered as 507 BLK, not 507 622, which is the number that trips up a purchase order more often than any of the others.

10) Does the Ives 507 coat hook meet ANSI/BHMA A156.16 if our hardware schedule calls that out?

It does. The 507 is built to ANSI/BHMA A156.16, the auxiliary hardware standard that covers hooks, stops, holders, and similar door trim rather than locks or closers. If the hook line item on your schedule cites A156.16, this one answers it directly.

11) Is the Trimco 7010 fOCAL a drop-in substitute for an Ives 507 hook?

Not on a like-for-like basis. The Trimco 7010 in the 7010 Series is a robe hook and stop - one part doing two jobs, holding a garment and stopping the door. The Ives 507 is a coat and hat hook only, surface mounted and packaged with fasteners for wood. Order the 7010 when the opening also needs the stop function from that same part; order the 507 or the Trimco 3070-1 coat and hat hook when a separate stop is already on the job and all you need on the door face is the hook.

12) Which hook should I order if it has to match the bath accessories in the unit rather than the door hardware?

Go to a bath hardware line so the hook matches the towel bars and rings already in the room. Emtek's 2606 solid brass robe hook is in its Traditional Bath Hardware series, the 2266 SELECT knurled tip double hook with rosette is in Select Bath Hardware, the 25050 is in Wrought Steel Bath Hardware, and the 2306 double hook is in Sandcast Bronze Bath Hardware. Deltana's 88DRH, 55D2010, BBS2010, and BBN2009 run in the 88, 55D, BBS, and BBN series. The Ives 507 is a door hardware accessory whose Rhodes design coordinates with Rhodes Series pulls and levers, so it matches the door, not the bath suite.

13) The Ives 507 comes in 613 oil-rubbed bronze - how is that different from the Emtek 2306 sandcast bronze hook?

On the Ives 507, 613 Satin Bronze Oil-Rubbed is a finish applied over a brass body, and the same casting is also sold in 605 Bright Brass, 625 Bright Chrome, 626 Satin Chrome, and 622 Matte Black. The Emtek 2306 is a sandcast bronze double hook, so the bronze is the material of the part itself and it carries two hooks rather than one. Pick by which you are matching: a finish code across a set of door hardware, or a cast bronze texture across a decorative package.

14) I'm specifying Ives Rhodes levers and pulls on a job. Is there a coat hook that matches the Rhodes design?

The 507 is the Rhodes Series hook, drawn to coordinate with the Rhodes pulls and levers, and it runs in 605, 613, 625, 626 and matte black so the finish call on the hook can follow the same schedule line as the rest of the Rhodes package. Brass substrate under the finish, same as the trim it sits beside.

15) Is the Ives 507 hook brass all the way through or plated steel?

Brass is the substrate on the 507, and that holds across every finish. The finish codes are the plating or coating carried over that brass body, so a 626 satin chrome hook is a brass hook wearing chrome, not a steel one. Worth knowing where the hook is going somewhere humid and you would rather not have a steel core under a scratched finish.

16) What are the alternatives to the Ives 507 if the client wants a patterned or sculpted hook?

Orca Hardware runs named decorative patterns: the 2753 Cypress robe hook in the 27-Cypress Series and the 3654 Swirl robe hook in the 36-Swirl Series, with the 4854 Blakely and 4954 Whidbey as the double-hook patterns. Emtek's 2266 SELECT uses a knurled tip and mounts on a rosette. The Ives 507 carries the Rhodes decorative design in a 2-5/16 in. x 1/2 in. x 3-1/2 in. body, so it stays small on the door face while the Orca and Emtek pieces make the pattern the feature.

17) For a multi-unit property standardizing on one hook, how do the Deltana series differ from each other?

Deltana splits them by series and by how many hooks are on the plate. The 88DRH is a double robe hook in the 88 Series and the 55D2010 is a double in the 55D Series, both solid brass. The BBS2010 is a double in the BBS Series and the BBN2009 is a single in the BBN Series. Standardizing means picking one series and staying in it so the mounting and the look repeat unit to unit. The Ives 507 is the door hardware answer to the same problem, a brass surface-mount coat and hat hook sold in five finishes so one model covers every unit.

How fast can I get the Ives 507 626 delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 507 626 come with a warranty?

Absolutely. The Ives 507 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 507 626?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 507 626 from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 507 Rhodes Series Brass Coat and Hat Hook with Decorative Design

Write a Review

Ives