Ives 700 Stainless Steel Pin a...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$804.60
$504.39
Ives 700 Stainless Steel Pin and Barrel Continuous Hinge, 1/4" Pin, 300 lb Capacity, Satin Stainless Steel Finish (630)

Ives 700 Stainless Steel Pin and Barrel Continuous Hinge with 1/4" Pin and 300 lb Capacity

(No reviews yet) Write a Review

Model: IVE-700-83-630

In Stock (leaves warehouse same day if ordered before 3pm ET)

$804.60
$504.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives 700 Stainless Steel Pin and Barrel Continuous Hinge

The Ives 700 is a full mortise, pin and barrel continuous hinge built for demanding commercial door applications. A 1/4" diameter pin rides on a nylon self-lubricating, medical-grade split bearing for smooth, maintenance-free operation across the full door height. The non-handed design accepts custom cut lengths and installs flush - only the pin and barrel are visible when the door is closed.

Load Capacity

Supports doors up to 300 lb without reinforcing and up to 600 lb with reinforcing. Weight is distributed along the entire frame length, eliminating door sag and reducing stress on the frame over time.

Technical Specifications

  • Hinge Lengths Available: 83", 85", 95", 120"
  • Maximum Door Width: 48"
  • Recommended Inset: 1/8" for 1-3/4" doors
  • Pin Diameter: 1/4"
  • Bearing: Nylon self-lubricating, medical-grade split bearing
  • Material: Stainless Steel
  • Finish: 630 / US32D - Satin Stainless Steel
  • Door Hand: Non-Handed
  • ANSI/BHMA: ANSI 156.26
  • Fire Rating: UL 10C - 3-Hour
  • Application: Commercial

Available Configurations

  • CON - Allegion Connect (access control integration)
  • HT - Hospital Tip
  • EPT - Electric Power Transfer
  • TW8 - Electrical Through-Wire

Typical Applications

  • Commercial office and government buildings
  • Healthcare and hospital facilities
  • Educational institutions
  • Retail and industrial environments
  • Multi-family and hospitality properties

Installation

Full mortise installation - mounts on the door stile and inside the frame jamb. Use manufacturer-provided templates for hole layout. Refer to the Allegion Connect Data Sheet and the Ives Full Line Catalog for complete installation details, torque specs, and reinforcing requirements.

Product Specs

Product Group:
Door Hinges and Pivots
Subcategory:
Hinges and Pivots
Product Subgroup:
Continuous Hinges
Product Type:
Pin and Barrel Continuous Hinges
ANSI/BHMA:
ANSI 156.26
Door Weight:
300
Commercial/Residential:
Commercial
Product Model:
700
Door Hand Direction:
Non-Handed
Product Size:
48"
Product Category:
Door Hinges and Pivots
Product Substrate:
Stainless Steel
Department:
Door Hardware

Ives IVE-700-83-630 – Frequently Asked Questions

1) Will the Ives 700 continuous hinge carry a heavy 300 lb door without frame reinforcing?
Yes. The Ives 700 is rated for doors up to 300 lb with no reinforcing, and up to 600 lb when the frame is reinforced. Because the hinge runs the full height of the opening, the door load spreads along the whole jamb instead of concentrating at three or four butt hinge locations, which is what stops the sag you get on heavy doors. Maximum door width is 48 inches.
2) Do I need to order a left hand and a right hand version of the Ives 700 hinge?
No. The 700 is non-handed, so one part number works on a left or right hand door. For a property manager standardizing across a building that means a single item on the shelf covers every opening, and for a pair of doors you order two of the same hinge.
3) Can I run access control wiring or a card reader lock through the Ives 700 hinge?
Yes, but it has to be specified on the order. The 700 is offered with EPT electric power transfer, TW8 electrical through-wire, and CON for Allegion Connect access control integration. Pick the option before ordering, since a plain 700 has no wire path through it. The Allegion Connect data sheet covers the integration details.
4) What is the closest full mortise alternative to the Ives 700 continuous hinge?
The Pemko FM Series is the nearest full mortise continuous hinge alternative. Both mount into the door stile and the frame jamb rather than on the face of the door, so the door edge preparation is comparable. The difference is the mechanism: the Ives 700 is a pin and barrel continuous hinge running a 1/4 inch pin on a nylon self-lubricating split bearing, while the Pemko FM Series is a geared continuous hinge, and Pemko offers it with a PemKonnect modular option. Confirm the frame jamb is prepped for a mortised leaf before ordering either.
5) Which continuous hinge should be used when the frame will not accept a mortised hinge leaf?
Use a full surface continuous hinge such as the Pemko DFS83HD1, an 83 inch full surface heavy duty geared continuous hinge in dark bronze aluminum, rated Grade 1 for doors 1 3/4 inch thick. A full surface hinge wraps the face of the door and the face of the frame, so no mortise pocket is cut into either. The Ives 700 is a full mortise hinge and requires both the door stile and the inside of the frame jamb to be prepped, with a recommended 1/8 inch inset on 1-3/4 inch doors.
6) Is a geared continuous hinge the same thing as the Ives 700?
No. The Ives 700 is a pin and barrel continuous hinge: a single 1/4 inch pin runs the full height inside a barrel on a nylon self-lubricating, medical-grade split bearing, and only the pin and barrel show when the door is closed. Geared continuous hinges, including the Pemko FM Series and the Pemko CFM/DFM PemKonnect Series, use intermeshing gear teeth between two leaves instead of a pin. Both carry a door along its full height, but the leaf profile and the door edge preparation differ, so they are not a drop-in swap for one another once a frame has been cut.
7) For a 3-hour fire rated opening, what is the difference between the Ives 700 and the Pemko CFM83-HD3?
The Ives 700 carries a UL 10C 3-hour fire rating as supplied. The Pemko CFM83-HD3, an 83 inch heavy duty full mortise continuous geared hinge, is Grade 3 and requires firepins for 3-hour fire rated doors, meaning that hardware has to be specified and installed for the opening to be compliant. If a fire door schedule is driving the order, count the firepins as part of the Pemko package when comparing the two.
8) Which continuous hinge should I use in a hospital or behavioral health corridor?
Specify the 700 with the HT hospital tip option. The hinge itself is stainless steel with a nylon self-lubricating medical-grade split bearing riding on a 1/4 inch pin, so there is nothing to oil and nothing to shed into a clean corridor. Hospital tip closes off the barrel end so gowns, IV lines and straps have nothing to catch on.
9) Pin and barrel or geared continuous hinge, which one do I want?
A pin and barrel hinge like the Ives 700 swings on a single 1/4 inch pin running the height of the door in a split bearing, and it reads like a traditional hinge barrel on the edge of the opening. A geared hinge such as the Pemko FM Series or the Pemko CFM/DFM PemKonnect meshes two leaves through a gear channel and typically shows a continuous cap along the edge. Both are full mortise options. Choose the 700 where you want a stainless steel hinge with a 3-hour UL 10C listing out of the box; the Pemko CFM83-HD3 by contrast is stated as requiring firepins for 3-hour fire rated doors.
10) Can the Ives 700 replace butt hinges on a door that keeps sagging or dragging?
That is the usual reason to move to it. Butt hinges load the frame at three or four points, and on a heavy or high traffic door the top hinge works loose and the door drops. The 700 carries the load along the full frame length, which removes the sag and cuts the stress on the frame. It is a full mortise hinge, so the door edge and jamb get mortised for it, which is not a swap-in for an existing butt hinge prep. Use the manufacturer templates for hole layout.
11) Is the Ives 700 hinge suitable for a full surface application on an existing frame?
No. The 700 is a full mortise hinge and has to be mortised into the door stile and the frame jamb. If you cannot mortise, for example on a retrofit where the frame is finished or the door is already hung, look at a full surface continuous hinge instead, such as the Pemko DFS83HD1 PemKonnect modular full surface geared hinge in 83 inch, which is stated for 1-3/4 inch doors.
12) Will one Ives 700 hinge work on a 48 inch wide door leaf?
48 inches is the maximum door width for the 700. Wider than that and you are outside the rating, regardless of door weight. Within that width, the hinge handles up to 300 lb unreinforced and 600 lb reinforced, which covers most 48 inch wide hollow metal and mineral core doors.
13) Which continuous hinge is Grade 1 if the specification calls for it?
The Pemko CFM/DFM PemKonnect Series is a Grade 1 continuous geared modular hinge, offered in 83 inch and 95 inch lengths, and the Pemko DFS83HD1 full surface hinge is also Grade 1. The Ives 700 is certified to ANSI 156.26, which is the ANSI/BHMA standard written specifically for continuous hinges, and it carries a UL 10C 3-hour fire rating with a 300 lb door capacity, 600 lb with reinforcing. If the submittal names a grade number, the Pemko Grade 1 products answer it directly; if it names the continuous hinge standard, the Ives 700 answers it.
14) What continuous hinge covers a door taller than 95 inches?
The Ives 700 is made in 83 inch, 85 inch, 95 inch and 120 inch lengths, and the non-handed design accepts custom cut lengths, so a 120 inch leaf covers tall openings in a single piece. The Pemko comparables run to 83 inch and 95 inch: the CFM/DFM PemKonnect Series lists 83 inch and 95 inch, and the CFM83-HD3 and DFS83HD1 are 83 inch. For a door in the 8 foot to 10 foot range, the 700 at 120 inches is the one that reaches it.
15) What is the alternative to a satin stainless continuous hinge when the openings are dark bronze?
The Pemko DFS83HD1 is an 83 inch full surface heavy duty geared continuous hinge supplied in dark bronze aluminum, Grade 1, for 1 3/4 inch doors. The Ives 700 is stainless steel in 630 / US32D satin stainless. On a full surface hinge the leaves stay visible on the door and frame faces, so the finish reads as part of the opening; on the full mortise 700 only the pin and barrel show when the door is closed. Match the mounting type to the frame prep first, then the finish.
16) Which continuous hinge supports electrified access control at the hinge?
The Ives 700 is offered in CON for Allegion Connect access control integration, EPT for electric power transfer, and TW8 electrical through-wire, alongside an HT hospital tip option. Among the geared comparables, Pemko offers the PemKonnect modular arrangement on the CFM/DFM Series and the FM Series. If the door carries an electric strike, electrified lock or card reader, specify the power transfer option at the time of order, because retrofitting a through-wire into an installed continuous hinge means pulling the door.
17) What finish does the Ives 700 continuous hinge come in, and will it match my other stainless hardware?
One finish: 630 / US32D satin stainless steel, on a stainless steel hinge. That is the standard commercial satin stainless finish, so it lines up with 630 exit devices, levers and push plates already on the openings. Every length, 83 through 120 inches, is the same 630 finish.
How fast can I get the Ives IVE-700-83-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives IVE-700-83-630 come with a warranty?
Absolutely. The Ives IVE-700-83-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives IVE-700-83-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives IVE-700-83-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!