Name: Ives 9100HD Heavy-Duty Solid Push Bar with 1" Round Profile and 2-1/2" Projection
Brand: Ives
SKU: 9100HD 28 US32D
Price: 146.11 USD
Availability: InStock

Product Overview
FAQs

Ives Heavy-Duty Solid Push Bar with 1" Round Profile and 2-1/2" Projection

Professional-Grade Solid Bar Push Hardware

The Ives 9100HD Heavy-Duty Push Bar delivers commercial-grade performance with solid bar construction and 1" round profile design. Available in standard lengths of 28" and 33", with custom sizing available in whole 1" increments from 25" to 45". Features 2-1/2" projection for optimal ergonomics and exceeds ANSI A156.06 standards for demanding commercial applications.

Professional Features & Benefits

Standard Length Options: Available in 28" and 33" standard lengths with custom sizing from 25" to 45" in 1" increments for versatile installation requirements.
Heavy-Duty Construction: Made from solid bar stock with heavy-duty machining and mounting hardware for exceptional durability in high-traffic applications.
ANSI Compliance: Exceeds industry and ANSI A156.06 standards ensuring reliable performance and code compliance.
Ergonomic Design: 1" round profile with 2-1/2" projection provides comfortable grip and optimal door-to-pull clearance.
Premium Materials: Available in brass or stainless steel substrates with various BHMA standard finishes including antimicrobial options.
Versatile Mounting Options: Compatible with multiple mounting schemes including standard thru-bolt, concealed mounts, and security mounting configurations.
ADA Compliance Ready: 2-1/2" projection meets ADA requirements for door-to-pull clearance in accessible applications.

Technical Specifications

ANSI/BHMA: ANSI A156.06
Commercial/Residential: Commercial
Department: Door Hardware
Duty Level: Heavy Duty
Product Category: Door Trim and Accessories
Product Dimension: DI: 1", L: 28"-33"
Product Group: Door Trim and Accessories
Product Model: 9100HD
Product Subgroup: Door Pulls, Push and Pull Plates
Product Substrate: Brass or Stanless Steel
Product Type: Push and Pull Bars
Subcategory: Pulls and Push Plates

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and mounting location clearances for this push bar.
Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces ensuring proper alignment and spacing.
Prepare door by drilling required holes and routing as specified in manufacturer instructions for the selected mounting configuration.
Install all mounting hardware and secure the push bar to door per manufacturer torque specifications using appropriate thru-bolt or concealed mounting system.
Adjust operational components for proper alignment and smooth operation throughout the full range of door movement.
Test push bar operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

Commercial Office Buildings
Educational Facilities
Healthcare Institutions
Retail Establishments
Industrial and Warehouse Facilities
Multi-Tenant Residential Properties
Government and Municipal Buildings

Why Choose Ives Quality?

Ives push bars deliver professional-grade reliability with solid bar stock construction and heavy-duty machining that exceeds ANSI A156.06 standards. Available in premium brass or stainless steel substrates with antimicrobial finish options for enhanced hygiene in healthcare and food service applications. Engineered for demanding commercial applications where dependable performance and ADA compliance are essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Subcategory:: Pulls and Push Plates
Product Group:: Door Trim and Accessories
Duty Level:: Heavy Duty
Product Subgroup:: Door Pulls, Push and Pull Plates
Product Type:: Push and Pull Bars
ANSI/BHMA:: ANSI A156.06
Commercial/Residential:: Commercial
Product Model:: 9100HD
Product Dimension:: DI: 1", L: 28"-33"
Product Category:: Door Trim and Accessories
Product Substrate:: Brass or Stanless Steel
Department:: Door Hardware

Ives 9100HD 28 US32D – Frequently Asked Questions

1) What lengths does the Ives 9100HD push bar come in, and can I get one sized for a wider door?

Two stock lengths, 28 inches and 33 inches, and every finish is offered in both. Beyond those, the 9100HD is made to order in whole 1 inch increments from 25 inches up to 45 inches, so an odd stile or a wide leaf can be matched without dropping to a shorter bar and leaving dead space at the edges.

2) Does the Ives 9100HD push bar give enough hand clearance for an ADA opening?

The bar stands off the door 2-1/2 inches, which is the clearance the description calls out as meeting ADA requirements for door-to-pull spacing. Combined with the 1 inch round bar diameter you get a full grip wrap without knuckles touching the face of the door, which is what matters on a door someone pushes hundreds of times a day.

3) Can the Ives 9100HD push bar be thru-bolted, or does it have to be surface mounted?

Thru-bolt is supported, and so are concealed mounts and security mounting configurations. Thru-bolting is the usual choice when there is a pull on the opposite face and you want the two pieces to bolt back to back through the door. Concealed mounting keeps fasteners off the face for a cleaner look. Before ordering, confirm door thickness, stile width, and clearance at the mounting location, since the prep is drilled to the configuration you pick.

4) Can I use the Ives 9100HD push bar on an exit door instead of a panic device?

No. The 9100HD is a push bar in the pull-hardware sense, a graspable bar for pushing a door open, with no latching mechanism of any kind. It does not release a latch and it is not a panic or fire exit device. If the opening requires panic hardware for egress, you need an exit device, and the 9100HD would only go on the opposite face or on a non-latching door. It is specified to ANSI A156.06, the standard covering architectural door trim.

5) I need to replace a worn push bar and keep the existing holes. Will the Ives 9100HD line up?

Only if the old bar shares the same center-to-center mounting spread, and that is set by the bar length. Order the 9100HD in the length that matches what is coming off, 28 or 33 inches stock, or any whole inch from 25 to 45 as a made-to-order size, and measure the existing hole spacing before you order. If the spacing does not match, you are drilling new holes, and on a thru-bolted door that means the pull on the far side has to move too.

6) What is the closest equivalent to an Ives 9100HD push bar in a 1 inch round profile from another manufacturer?

The Rockwood Series 47 push bar is the nearest match in profile. Rockwood's Series 47 - 1" Push Bar carries the same 1 inch bar diameter as the Ives 9100HD, which is specified as DI: 1". Both are straight round push bars mounted horizontally across the push side of a swing door, so a door already prepped for one round bar of that diameter reads the same way for the other. Confirm the mounting hole centers against the door prep you have before ordering, since hole spacing follows the length you specify rather than the profile.

7) The door needs a pull on the outside, not a push bar. What should I order instead of a 9100HD?

A push bar is push-side hardware only. For the pull side, the Trimco 1015 is a bar style pull plate with a 6 inch center-to-center pull, which puts a graspable bar on a backing plate rather than spanning the door face. That is the piece to use where the leaf latches and has to be pulled open. The Ives 9100HD is a solid bar with a 2-1/2 inch projection running horizontally across the push face, so on a paired opening many jobs run the 9100HD on the push side and a pull plate on the pull side.

8) Is a Trimco 1015 pull plate a substitute for an Ives 9100HD push bar?

No. They do different jobs on the door. The Trimco 1015 is a bar style pull plate with a 6 inch center-to-center pull, so the graspable portion spans 6 inches on a plate. The Ives 9100HD is a push bar built from solid bar stock in 28 inch and 33 inch standard lengths, with custom sizing in 1 inch increments from 25 inch to 45 inch, sized to reach across the door and be pushed anywhere along its run. Swapping one for the other changes both the door prep and how the opening is operated.

9) Is the Ives 9100HD available in stainless steel, or only brass?

Both. The 9100HD is made in brass or stainless steel substrate, and the finish you order tells you which you are getting: 629 Bright Stainless Steel and 630 Satin Stainless Steel are the stainless options, while 605 Bright Brass, 606 Satin Brass, 612 Satin Bronze and 613 Satin Bronze Oil-Rubbed are brass-family finishes. For coastal, wash-down, or heavy-cleaning environments, 630 satin stainless is the usual specification because it hides wear and does not rely on a plated topcoat.

10) What finishes can I get on the Ives 9100HD push bar to match the rest of my building's hardware?

Twelve finishes, each available in both the 28 and 33 inch length: 605 Bright Brass, 606 Satin Brass, 612 Satin Bronze, 613 Satin Bronze Oil-Rubbed, 619 Satin Nickel, 625 Bright Chrome, 626 Satin Chrome, 629 Bright Stainless Steel, 630 Satin Stainless Steel, 631 Matte Black, 643E Aged Bronze and 695 Dark Bronze. Those are BHMA finish codes, so 626 satin chrome or 630 satin stainless will read the same against levers and closers carrying the same number from other manufacturers, which is how you keep a fleet of openings consistent.

11) Should I use a push bar or a push plate on the pull side of a commercial door?

A push bar like the 9100HD spans the door and gives a hand-hold anywhere along its 28 or 33 inch run, which suits doors people hit at a walk with an armful of boxes or a cart. A push plate only takes a flat palm at one spot. The bar also stands 2-1/2 inches off the face, so it works where you need graspable clearance rather than a flush surface. Where you want the flat-plate look with a graspable element on the same piece, the Trimco 1015 heavy duty pull plate pairs a plate with a 6 inch center-to-center pull.

12) Is there an antimicrobial option on the Ives 9100HD for a healthcare or food service door?

Yes. Beyond the standard BHMA finishes, the 9100HD is offered with antimicrobial finish options, which is why it turns up on patient-wing corridors, kitchens and cafeteria doors where the push side is the highest-touch surface in the building.

13) What is the difference between the Ives 9100HD and the Rockwood 47 Series push bar?

Both are 1 inch round push bars, so they occupy the same slot on a door. The 9100HD is the heavy-duty solid bar version, with a 2-1/2 inch projection, a 25 to 45 inch made-to-order range, and brass or stainless substrate in twelve finishes. The Rockwood Series 47 is the equivalent 1 inch bar from Rockwood if you are standardizing on that manufacturer across a job. Match the length and the finish code, not just the diameter, when you are cross-shopping the two.

14) Will the Ives 9100HD work on a narrow stile aluminum storefront door?

Check the stile before you commit. The 9100HD is a surface-applied bar with a 1 inch round profile, and the mounting posts land on the door face, so the stile has to be wide enough to take the prep at both ends and to leave the drilled holes clear of the glass stop and the lock case. On a narrow stile aluminum door that is the constraint that decides it, not the length of the bar. Verify the stile width and door thickness against the mounting configuration you are ordering.

15) Do I need to order anything else to install the Ives 9100HD push bar?

Mounting hardware comes with it, described as heavy-duty machining and mounting hardware, and Ives supplies templates for marking the hole locations. What you do have to decide at order time is the mounting scheme, thru-bolt, concealed, or security, since that drives the prep drilled into the door, plus the length and the finish. If the opposite face needs a pull, that is a separate piece and is not part of this order.

16) Which push and pull hardware is rated heavy duty for a high traffic entrance?

Both the Ives 9100HD and the Trimco 1015 are classed heavy duty. The 9100HD is a heavy duty solid bar push bar that exceeds ANSI A156.06 and is built from solid bar stock with heavy duty machining and mounting hardware. The Trimco 1015 is a heavy duty bar style pull plate with a 6 inch center-to-center pull. For a school or healthcare entrance where the same leaf is worked from both sides, the two cover opposite faces of the opening at the same duty class.

How fast can I get the Ives 9100HD 28 US32D delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 9100HD 28 US32D come with a warranty?

Absolutely. The Ives 9100HD 28 US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 9100HD 28 US32D?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 9100HD 28 US32D from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 9100HD Heavy-Duty Solid Push Bar with 1" Round Profile and 2-1/2" Projection

Write a Review

Ives