Name: Ives FS13 Heavy-Duty Brass Floor Dome Stop with Replaceable Rubber Bumper
Brand: Ives
SKU: FS13-26D
Price: 5.91 USD
Availability: InStock

Product Overview
FAQs

Ives Heavy-Duty Brass Floor Dome Stop with Replaceable Rubber Bumper

Professional Floor-Mounted Door Protection Solution

The Ives FS13 Heavy-Duty Brass Floor Dome Stop provides reliable door protection with heavy-duty cast brass construction and a replaceable grey rubber bumper. Measuring 1-3/4" in diameter and 5/32" in height, this floor-mounted stop prevents door damage while offering ANSI/BHMA A156.16 compliance for commercial applications. The unit includes fasteners for mounting in all types of floor construction, including concrete.

Professional Features & Benefits

Compact Dimensions: 1-3/4" diameter and 5/32" height for low-profile installation that minimizes trip hazards.
Heavy-Duty Cast Brass Construction: Durable brass material provides exceptional strength and corrosion resistance for long-term commercial use.
Replaceable Rubber Bumper: Grey rubber bumper protects door finish and can be replaced when worn, extending product life.
Universal Floor Mounting: Includes fasteners sufficient for mounting in all types of floor construction, including concrete applications.
Threshold Conversion Ready: Compatible with R14 riser design for easy conversion to threshold applications when needed.
ANSI/BHMA Compliance: Meets ANSI/BHMA A156.16 standards ensuring reliable performance in commercial environments.
Non-Marring Protection: Rubber bumper design protects door, wall, and frame finishes from damage during door operation.

Technical Specifications

ANSI/BHMA: ANSI/BHMA A156.16, L12141
Commercial/Residential: Commercial
Department: Door Hardware
Duty Level: Heavy Duty
Package Includes: Fasteners for mounting in all types of floor construction
Product Category: Door Trim and Accessories
Product Dimension: 1-3/4" (Diameter), 5/32" (Height)
Product Group: Door Trim and Accessories
Product Model: FS13
Product Subgroup: Door Stops, Holders, Silencers & Bumpers
Product Substrate: Brass
Product Type: Door Stops - Floor
Subcategory: Stops

Installation & Operation

Review manufacturer specifications and verify floor preparation requirements including surface material compatibility and structural adequacy for mounting.
Use manufacturer-provided templates to mark mounting hole locations accurately on floor surface.
Prepare floor by drilling required holes as specified in manufacturer instructions, using appropriate drill bits for concrete or other floor materials.
Install mounting hardware using provided fasteners and secure the dome stop to floor per manufacturer torque specifications.
Adjust positioning for proper door clearance and verify smooth door operation without interference.
Test door stop function to verify proper contact with door and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

Commercial Office Buildings
Educational Facilities
Healthcare Institutions
Retail Establishments
Industrial and Warehouse Facilities
Multi-Tenant Residential Properties
Government and Municipal Buildings

Why Choose Ives Quality?

Ives door protection products deliver professional-grade reliability with heavy-duty cast brass construction designed for demanding commercial applications. ANSI/BHMA A156.16 compliance ensures consistent performance standards, while the replaceable rubber bumper design provides long-term value and serviceability. Engineered for commercial environments where dependable door protection is essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Subcategory:: Stops
Product Group:: Door Trim and Accessories
Duty Level:: Heavy Duty
Package Includes:: Fasteners for mounting in all types of floor construction
Product Subgroup:: Door Stops, Holders, Silencers & Bumpers
Product Type:: Door Stops - Floor
ANSI/BHMA:: ANSI/BHMA A156.16, L12141
Commercial/Residential:: Commercial
Product Model:: FS13
Product Dimension:: 1-3/4" (Diameter), 5/32" (Height)
Product Category:: Door Trim and Accessories
Product Substrate:: Brass
Department:: Door Hardware

Ives FS13-26D – Frequently Asked Questions

1) How tall does the Ives FS13 floor dome stop sit off the floor?

The FS13 dome stop stands 5/32 inch high with a 1-3/4 inch diameter footprint. That is a low-rise profile, so it sits close to flush and stays out of the way of foot traffic, wheeled carts, and mop equipment. If you need the door to be stopped higher up (say the door has a sweep or a shoe that would ride over a low dome), a gooseneck style like the Orca 22HD or the Emtek 2253 catches the door well above the floor instead.

2) Can the Ives FS13 be mounted into a concrete floor?

Yes. The FS13 ships with fasteners for mounting in all types of floor construction, concrete included, so a slab-on-grade install does not need a separate anchor kit sourced on the side. Drill per the template, set the anchors, and check door clearance before final tightening.

3) Does the Ives FS13 door stop meet ANSI/BHMA for a commercial job spec?

The FS13 carries ANSI/BHMA A156.16 with the L12141 type designation, and it is classed as a commercial, heavy duty product. If your drawing calls out A156.16 floor stops, the L12141 number is the line to match on the hardware schedule.

4) Will a dome floor stop hold my door open, or does it only stop it?

The FS13 is a stop, not a holder. It arrests the door's swing to protect the wall and the lever, then the door is free to close again. If you need the door to stay put once it is open, that is a different device: the SOSS MDH is a magnetic door holder and stop, and the Orca 22HD series is catalogued as a door holder. Ordering a dome stop and expecting hold-open is the most common mix-up on this part.

5) What is the closest dome floor stop to the Ives FS13 if I want the same low-profile shape from another brand?

The FS13 is a cast brass floor dome stop measuring 1-3/4 inch in diameter and 5/32 inch in height, with a replaceable grey rubber bumper. The nearest same-shape alternates are the Orca Hardware 23LP Series dome floor stop, low rise, with a gray tip, and the Delaney Dome Door Stop from the Dome Stop series. Both keep the low dome profile that sits close to the floor rather than standing up off it. Where the FS13 differs is documentation: it carries ANSI/BHMA A156.16, L12141 and is rated heavy duty for commercial use, which is the detail an institutional specifier is usually matching on.

6) The door swings too far to be caught by a dome stop at the floor. What should I use instead?

A dome stop like the FS13 works by stopping the door where it meets the floor, so it only helps if the door reaches its limit at that point. When the door needs to be arrested higher up or held open, a gooseneck floor stop is the usual substitute: the Orca Hardware 22HD Series gooseneck floor stop with black tip is listed as a door holder and covers 1-3/8 inch or 1-3/4 inch door thickness. The Emtek 2253 Goose Style Door Stop and the Delaney Gooseneck Floor Door Stop are the same riser idea in other lines. For a door that must stand open on its own, the SOSS MDH is a magnetic door holder and stop, 3-5/16 inch by 1-3/4 inch, in a heavy duty rating.

7) Is the Deltana UFBD3505 a substitute for the Ives FS13 on a commercial corridor door?

They are not the same class of part even though both mount to the floor. The UFBD3505 is a 3-1/2 inch round universal floor bumper described as decorative, in solid brass, and it takes up twice the floor diameter of the FS13, which is 1-3/4 inch. The FS13 is specified as commercial and heavy duty and carries ANSI/BHMA A156.16, L12141, which is what a corridor door in a school or hospital is usually written against. Use the UFBD3505 where the larger decorative cap is the point; use the FS13 where the A156.16 line has to be satisfied.

8) What looks like a drop-in for the FS13 but will not behave the same way on the door?

The one to watch is the SOSS MDH, which is a magnetic door holder and stop at 3-5/16 inch by 1-3/4 inch in a heavy duty rating. It mounts in the same general area and reads as a floor stop in a takeoff, but a magnetic holder is meant to capture and retain the door, not simply arrest it. The Orca 22HD gooseneck is likewise catalogued as a door holder. The FS13 is a stop: it takes the swing on a replaceable grey rubber bumper and releases the door as soon as you pull it back. If the specification calls for the door to stay put, a plain dome stop will not do that job.

9) When the rubber tip on an Ives FS13 wears out, do I have to replace the whole stop?

No. The grey rubber bumper on the FS13 is replaceable, so the cast brass body stays on the floor and only the tip gets swapped. For a property manager running a lot of doors, that is the difference between a parts change and pulling anchors out of a slab.

10) Can I use the Ives FS13 on a threshold instead of the floor?

Yes, with the R14 riser. The FS13 converts to a threshold application using that riser design, which lifts the dome so the door contacts it correctly where the stop has to land on a raised threshold rather than the finished floor.

11) What is a good alternative to the Ives FS13 if I want a larger or more decorative floor bumper?

For a bigger footprint, the Deltana UFBD3505 is a 3-1/2 inch round decorative solid brass floor bumper, and the UFBP4505 gives a 1-5/8 inch pattern cap. If you want something close in size to the FS13's 1-3/4 inch dome, the Deltana UFB4505 is 1-1/2 inch round solid brass and the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper. A square rather than round face is the Deltana UFBS138 at 1-3/8 inch. The FS13 stays the pick when the job is spec'd to ANSI/BHMA A156.16.

12) I need a low-profile dome floor stop that is not Ives. What else is there?

The Orca 23LP Series is the closest match in shape and intent: a low rise dome floor stop with a gray tip, catalogued as a door stop. Delaney also makes a dome floor stop in its Dome Stop series, and Emtek's 2251 is a half dome. Where the FS13 separates itself is the documented A156.16 / L12141 listing and the cast brass heavy duty build, which is what an institutional spec is usually asking for.

13) Is a floor stop or a wall stop the right call for my door?

A floor stop like the FS13 is the answer when there is no solid wall behind the door to take a wall bumper, when the door swings into an opening or a corridor, or when the wall behind is glass or drywall with no blocking. The trade-off is a fixture in the walking path, which is why the 5/32 inch height on this one matters. If the door swings flat against a good backing wall, a wall stop keeps the floor clear and is usually the easier install.

14) Do I need to order a separate rubber tip or anchor kit with the Ives FS13?

No add-ons are needed for a standard install. The FS13 arrives with the bumper fitted and with fasteners for mounting in all types of floor construction. The only thing worth adding to the order is the R14 riser, and only if the stop is landing on a threshold rather than the floor.

15) I need a smaller footprint than 1-3/4 inches on the floor. What brass floor bumper has a tighter diameter?

The FS13 puts a 1-3/4 inch diameter on the floor. If the strike point lands close to a threshold, a trim line, or a tile joint and you need less coverage, the Deltana UFB4505 round universal floor door bumper is 1-1/2 inch in solid brass, and the Deltana UFBS138 is a square universal floor door bumper at 1-3/8 inch, also solid brass. The Emtek 2254 floor door bumper is 1-3/8 inch by 1-1/4 inch, and the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper. The square UFBS138 is the one to look at when the stop needs to line up with a square-edged trim detail rather than a round one.

16) Which floor stop can I re-tip instead of replacing the whole unit when the rubber wears out?

The FS13 is built around a replaceable grey rubber bumper on a cast brass body, so a worn tip is a parts swap rather than a new stop and a fresh set of floor anchors. That matters on a fleet of doors where the same stop wears out on a schedule. Among the alternates, the Orca 23LP dome floor stop is supplied with a gray tip and the Orca 22HD gooseneck with a black tip, so tip color is the visible difference at the floor. The Emtek 2251 Half Dome Door Stop is the closer profile match if you want a half dome silhouette rather than a full dome.

17) I am standardizing floor stops across a building with concrete slabs and finished floors. Does one part cover both, or do I need two?

The FS13 ships with fasteners for mounting in all types of floor construction, including concrete, so one line item covers slab-on-grade and finished floor alike, and it is offered in bright chrome 625, satin chrome 626, satin bronze 612, oil-rubbed satin bronze 613, bright brass 605, and satin brass 606 so the finish can follow each area without changing the part. The Deltana UFB4505 at 1-1/2 inch and the UFBP4505 pattern cap at 1-5/8 inch are the alternates if a specific cap appearance is being matched in a lobby, with the plain FS13 dome carried through back-of-house.

18) What is the Ives FS13 floor stop actually made of, and will it hold up in a wet or coastal building?

Cast brass body with a rubber bumper. Brass does not rust, which is why it gets specified for entries, locker rooms, pool corridors, and other damp areas where a plated steel stop would bloom. The finish is plated over that brass, so a scratch does not expose steel underneath.

19) Can the same Ives FS13 stop be used on left and right hand doors?

Handing does not apply. The FS13 is a symmetrical dome that mounts to the floor, so one part number covers doors of either hand and either swing. That is one reason it standardizes well across a building: a single finish and a single MPN covers every opening in the schedule.

How fast can I get the Ives FS13-26D delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives FS13-26D come with a warranty?

Absolutely. The Ives FS13-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives FS13-26D?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives FS13-26D from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives FS13 Heavy-Duty Brass Floor Dome Stop with Replaceable Rubber Bumper

Write a Review

Ives