Ives FS436 Heavy-Duty Cast Dom...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.40
$5.30
Ives FS436 heavy-duty cast dome floor stop, 626 Satin Chrome finish with grey rubber bumper, 1" overall height, 1-3/4" x 2" oval base

Ives FS436 Heavy-Duty Cast Dome Floor Stop with Grey Rubber Bumper

(2 reviews) Write a Review

Model: FS436 26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.40
$5.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives FS436 Heavy-Duty Cast Dome Floor Stop with Grey Rubber Bumper

The Ives FS436 is a heavy-duty cast dome floor stop for commercial doors without thresholds or where overhead stops are not practical. Cast brass or aluminum body with an integrated grey rubber bumper. Dimensions: 3/16" x 1-3/4" x 2" footprint, 1" height. Meets ANSI/BHMA A156.16 (L12141 for brass substrates, L32141 for aluminum substrates). Available in 11 finishes across brass and aluminum substrates.

Features

  • Heavy-duty cast construction in brass or aluminum substrate to match door hardware coordination requirements.
  • Grey rubber bumper provides non-marring door contact, protecting door and floor finishes from impact damage.
  • Compact profile: 3/16" x 1-3/4" x 2" base, 1" height - effective door control without an obtrusive floor presence.
  • ANSI/BHMA A156.16 compliant - L12141 (brass), L32141 (aluminum).
  • Package includes fasteners for light-duty masonry and wood applications.

Technical Specifications

  • Model: FS436
  • Duty Level: Heavy Duty
  • Product Dimension: 3/16" x 1-3/4" x 2"
  • Product Height: 1"
  • Substrate: Brass or Aluminum
  • ANSI/BHMA: A156.16, L12141 (Brass) / L32141 (Aluminum)
  • Application: Commercial
  • Package Includes: Fasteners for light-duty masonry and wood applications

Installation Notes

  • Verify substrate material (brass or aluminum) matches finish selection before ordering.
  • Mark and drill mounting holes per manufacturer template for masonry or wood floor surfaces.
  • Secure with provided fasteners; confirm rubber bumper contacts door at the correct swing point before final torque.
  • For complete installation details, refer to the Ives Full Line Catalog (PDF available on this page).

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Subcategory:
Stops
Product Group:
Door Trim and Accessories
Duty Level:
Heavy Duty
Package Includes:
Fasteners for light duty masonry and wood applications
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Floor
ANSI/BHMA:
ANSI/BHMA A156.16, L12141 for Brass and L32141 for aluminum
Commercial/Residential:
Commercial
Tags:
fs436 us26d, ives 436, ives fs 436, floor stop fs436, ives floor stop fs436, fs436 door stop
Product Model:
FS436
Product Dimension:
3/16" x 1-3/4" x 2"
Product Height:
1"
Product Category:
Door Trim and Accessories
Product Substrate:
Brass or Aluminum
Department:
Door Hardware

Ives FS436 26D – Frequently Asked Questions

1) Will an Ives FS436 floor stop work on a commercial door that has no threshold?
That is exactly the opening the FS436 cast dome floor stop is meant for: doors without a threshold, where an overhead stop isn't practical. It anchors to the floor at the swing point rather than to the door or the frame, and the grey rubber bumper takes the hit so the leaf, wall and frame don't get marred. The dome stands 1 inch high and the body measures 3/16 x 1-3/4 x 2 inches, so it sits low in the walking path. Fasteners for light duty masonry and wood are in the box, which covers most concrete-slab and wood-subfloor installs.
2) Does the Ives FS436 dome floor stop hold the door open, or does it only stop it?
It only stops the door. The FS436 is a cast dome floor stop with a rubber bumper, so it arrests the swing and protects the wall, then the door is free to close again. If you need the leaf to stay put, that's a different part: the Orca Hardware 22HD Series gooseneck floor stop is listed as a door holder, and the SOSS MDH magnetic door holder and stop, 3-5/16 x 1-3/4 inches, both stops and holds. Buying a plain dome stop when the tenant actually wants the door parked open is the most common mistake on this part.
3) Dome floor stop or gooseneck floor stop, which one should I use?
Height off the floor is the whole decision. The Ives FS436 dome stop stands 1 inch tall, so it catches the very bottom edge of the leaf and stays out of the way underfoot, which is why it suits corridors and high-traffic commercial openings. A gooseneck rises well above the floor and reaches up to meet the door face, so it's the choice when the door bottom is undercut, when there's carpet, or when you want a holder. Gooseneck options include the Delaney Gooseneck Floor Door Stop, the Emtek 2253 Goose Style, and the Orca Hardware 22HD Series, which also functions as a door holder. If you want a dome but a different brand, the Orca 23LP Series is a low rise dome floor stop with a gray tip.
4) Will a 1 inch tall dome stop actually catch my door, or will the door sweep over it?
The FS436 dome is 1 inch high, so the bottom of the leaf has to hang lower than 1 inch above the finished floor at the point where the stop sits. On a typical commercial opening with a small undercut that's fine. Where it fails is a door with a deep undercut for return air, or one hung high over thick carpet, because the leaf passes straight over the dome. In that case go to a gooseneck stop, which rises higher and meets the door face instead of its bottom edge: the Delaney Gooseneck Floor Door Stop or the Emtek 2253 Goose Style are the same idea in a taller body.
5) Does the Ives FS436 meet ANSI/BHMA A156.16 for a commercial hardware spec?
Yes. The FS436 is certified to ANSI/BHMA A156.16, L12141 for the brass substrate version and L32141 for the aluminum substrate version, and it's classified heavy duty for commercial use. Cite the number that matches the finish you're buying: the 628 clear anodized aluminum unit is the L32141 aluminum-substrate part, and the brass-substrate finishes carry L12141. That distinction is what a spec reviewer on an institutional or government job will check against the door hardware schedule.
6) What other brand makes a dome floor stop equivalent to the Ives FS436?
The closest same-shape alternates are the Orca Hardware 23LP Series Dome Floor Stop, a low rise dome with a gray tip, the Delaney Dome Door Stop, and the Emtek 2251 Half Dome Door Stop. The Ives FS436 is a heavy duty cast dome measuring 3/16 inch by 1-3/4 inch by 2 inch with a 1 inch height, uses a grey rubber bumper, and meets ANSI/BHMA A156.16 under L12141 for brass and L32141 for aluminum. All four are low dome profiles that catch the bottom edge of the door on openings without a threshold, so the deciding details are the footprint the floor can take and how the finish coordinates with the rest of the door hardware.
7) I need the door to stay open, not just stop. What do I use instead of the Ives FS436?
The Ives FS436 is a floor stop: the cast dome halts the swing and the grey rubber bumper takes the impact, and the door is then free to close. For an opening that has to be parked open, the Orca Hardware 22HD Series goose neck floor stop with black tip is listed with a door holder function and a door thickness range of 1-3/8 inch or 1-3/4 inch, and the SOSS MDH Magnetic Door Holder and Stop measures 3-5/16 inch by 1-3/4 inch and is rated heavy duty. The Orca 22HD holds mechanically at the goose neck; the SOSS MDH holds magnetically. Confirm before ordering that the opening is not a fire door or a rated corridor door, where holding the leaf open changes the code condition.
8) Which Ives FS436 finish do I order for aluminum storefront hardware in 628?
Order FS43628, the 628 clear anodized aluminum version. That's the one built on the aluminum substrate, and it's the unit certified under L32141 rather than L12141. Every other FS436 finish is on the brass substrate, so if your storefront package is 628 across the board and you want the stop to match, 628 is the only one that lines up.
9) I need floor stops to match the hardware finish already used across my building. What finishes does the Ives FS436 come in?
Eleven, which covers nearly any existing hardware set: 605 bright brass (FS4363), 606 satin brass (FS4364), 609 blackened brass (FS4365), 612 satin bronze (FS43610), 613 satin bronze oil-rubbed (FS43610B), 619 satin nickel (FS43615), 622 matte black (FS436-BLK), 625 bright chrome (FS43626), 626 satin chrome (FS43626D), 628 clear anodized aluminum (FS43628), and 643E aged bronze (FS436-716). For a commercial building standardizing on 626 satin chrome, FS43626D is the part number to repeat on every order.
10) Do Ives FS436 floor stops come with screws, or do I need to buy anchors separately?
Fasteners come in the box, for light duty masonry and wood applications, so a stop going into a wood subfloor or a standard slab installs with what's supplied. Anything outside that, a raised access floor, steel deck, or tile over a substrate you can't get a light duty anchor to bite in, and you're providing the anchor to suit. Worth checking before the crew is on site, because the floor prep decides it, not the stop.
11) I'm replacing an old dome floor stop from another brand. What is the closest match to the Ives FS436?
Same-type swap in another brand is the Orca Hardware 23LP Series, a low rise dome floor stop with a gray tip. On the round-bumper side, Deltana's solid brass universal floor bumpers cover the same job in several diameters: the UFB4505 at 1-1/2 inches, the UFBP4505 pattern cap at 1-5/8 inches, and the UFBS138 square at 1-3/8 inches. What none of these guarantees is that the existing anchor hole lines up, so plan on drilling a fresh hole and patching the old one, and pick by finish match and height rather than by footprint.
12) Is the Ives FS436 overkill for apartment interior doors?
It's built for commercial duty, heavy duty rated and certified to ANSI/BHMA A156.16, which is what you want on a leasing office, corridor, or amenity room door taking constant traffic. On interior unit doors where appearance leads and traffic is light, a decorative bumper is the more sensible buy: the Deltana UFBD3505 round decorative floor bumper at 3-1/2 inches in solid brass, the Emtek 2254 floor door bumper at 1-3/8 x 1-1/4 inches, or the Emtek 2257 cylindrical floor bumper at 1-1/2 inches. Plenty of property managers run the Ives on the common areas and something lighter inside the units.
13) Is there a plain floor bumper alternative to the cast dome Ives FS436?
Yes. Where a plain puck or cylinder suits the space better than a cast dome, the Deltana UFB4505 is a round universal floor door bumper at 1-1/2 inch in solid brass, the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper, and the Emtek 2254 is a floor door bumper measuring 1-3/8 inch by 1-1/4 inch. The Ives FS436 differs in that it is a heavy duty cast dome carrying ANSI/BHMA A156.16 certification and it ships with fasteners for light duty masonry and wood applications, which matters when the same crew is anchoring stops into both slab and wood subfloor on one job.
14) I am matching clear anodized aluminum storefront hardware. Which floor stop coordinates, the Ives FS436 or a Deltana bumper?
The Ives FS436 is built on either a brass or an aluminum substrate and is offered in 628 clear anodized aluminum, which is the finish that lines up with aluminum storefront and entrance hardware; on the aluminum substrate it certifies to ANSI/BHMA A156.16 as L32141, and on brass as L12141. The Deltana floor bumpers in the same size range, the UFB4505 at 1-1/2 inch and the UFBS138 square at 1-3/8 inch, are solid brass pieces. If the rest of the opening is anodized aluminum, the 628 FS436 is the direct coordination; if the opening is brass or bronze trim, the FS436 also runs 605 bright brass, 606 satin brass, and 613 satin bronze oil-rubbed alongside the Deltana brass options.
15) Can the Emtek 2254 floor bumper drop straight into an existing Ives FS436 location?
Treat it as a new install rather than a swap. The Emtek 2254 floor door bumper measures 1-3/8 inch by 1-1/4 inch, while the Ives FS436 has a 1-3/4 inch by 2 inch base and stands 1 inch high, so the two do not share a footprint and the contact height on the door is not the same. Before replacing an FS436 with the 2254, or with the Emtek 2257 cylindrical bumper at 1-1/2 inch, mark the strike point on the leaf and confirm the floor prep at that spot instead of assuming the existing anchor location carries over.
16) The specification calls out ANSI/BHMA A156.16 for floor stops. Which floor-mounted option meets it?
The Ives FS436 is the one to submit against that line: it is a heavy duty commercial cast dome floor stop certified to ANSI/BHMA A156.16, listed as L12141 on the brass substrate and L32141 on the aluminum substrate, so the certification holds whichever substrate the finish schedule drives. Among the other floor-mounted pieces in the same comparison, the SOSS MDH Magnetic Door Holder and Stop is also rated heavy duty, though it functions as a magnetic holder at 3-5/16 inch by 1-3/4 inch rather than as a stop. For a healthcare, education, or government submittal where the L designation has to appear on the schedule, the FS436 carries it in both substrates.
17) How much floor space does the Ives FS436 take up in a corridor?
Very little. The cast dome body measures 3/16 x 1-3/4 x 2 inches with a 1 inch overall height, so it's a small low mound rather than something that projects into the walking path the way a gooseneck does. In a hospital or school corridor where mop carts and gurneys pass the opening daily, that low profile is the reason to pick a dome over a taller stop.
18) Will an Ives FS436 mark up my door or the wall behind it?
No. Contact is made on a grey rubber bumper made of non-marring material, so the door face, the wall and the frame stay clean where a bare metal stop would leave a witness mark. The bumper is the wear item on a cast dome stop, and it is what takes the repeated impact in a high-traffic opening.
19) I want a square floor stop rather than a round dome. What is the alternative to the Ives FS436?
The Deltana UFBS138 is a square universal floor door bumper at 1-3/8 inch in solid brass, which suits square rose and square trim packages where a round dome reads out of place. The Ives FS436 is a cast dome with a 3/16 inch by 1-3/4 inch by 2 inch footprint and a 1 inch height, so the two occupy different amounts of floor as well as different shapes. Check the leaf strike point against the square bumper height before swapping, since the contact face sits at a different level than the FS436 dome.
20) What is a more decorative floor stop for a lobby or unit door than the Ives FS436?
Two Deltana pieces carry decorative treatment: the UFBD3505 is a round universal floor bumper at 3-1/2 inch, described as decorative, in solid brass, and the UFBP4505 is a round universal floor door bumper with a pattern cap at 1-5/8 inch, also solid brass. The 3-1/2 inch UFBD3505 covers considerably more floor than the Ives FS436, whose base measures 1-3/4 inch by 2 inch, so it wants an open floor area rather than a tight jamb-side location. The FS436 is the plain heavy duty commercial dome of the group.
How fast can I get the Ives FS436 26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives FS436 26D come with a warranty?
Absolutely. The Ives FS436 26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives FS436 26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives FS436 26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    As described

    Posted by Liz on Feb 3rd 2025

    Stops the door. Easy to install

  • 5
    My Door's Best Buddy!

    Posted by Aaron on Jul 18th 2023

    Hey everyone, just gotta share my thoughts on the Ives FS436 Floor Dome Stop. The low-profile design blends in seamlessly with my floor, and it works like a charm! No more slamming doors, hallelujah! Just a heads-up, it's not the cheapest option out there. But, quality-wise, it's top-notch. Definitely worth the investment to keep my doors in check!

!