You may also like
FS439 DOME STOP
With a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives products are designed to ensure that doors will not slam into the wall. These accessories are typically found on doors without an overhead stop or holder.
FEATURES AND BENEFITS
- High or low-rise mount;
- Spring-loaded rubber contact;
- Packed with fasteners for light duty masonry and wood applications;
- Grey rubber bumper.
Substrate Selections
- Finish 630 is for an Stainless Steel substrate
- All other finishes are for a Zinc substrate
With a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives products are designed to ensure that doors will not slam into the wall. These accessories are typically found on doors without an overhead stop or holder.
FEATURES AND BENEFITS
- The stops prevent door, wall and frame damage, and stopping the door from opening too far
- Designed in brass, aluminum, iron, steel, and zinc construction and a variety of finish options
- Utilize non-marring rubber to protect the finish of walls, molding, and doors
- Specific product series offer concealed tamper-proof mounting
- Meets ANSI/BHMA 156.16
- Floor stops: Floor stops are mounted to the floor and stop the door from opening too far and hitting the wall or another door.
- Floor stops and holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is connected to the door.
- Wall bumpers/stops: Wall bumpers and stops are mounted to the wall and stop the door from opening too far and hitting the wall or another door.
- Wall holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is manually connected to the door.
- Kick down holder: Kick down holders are mounted to the door face and can either be in the up position to let the door swing freely or the down position to hold the door open at different angles
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
- Residential door stops: Residential door stops are mounted at the base of the door or wall to stop from opening too far and hitting the wall or another door.
- Hinge pin stops: Hinge pin stops are mounted on the hinge pin to stop the door from opening too far and hitting the wall or another door.
- Silencers: Silencers are installed on metal frames featuring pneumatic design that, once installed, form an air pocket to absorb shock and reduce the noise of the door closing.
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
Manufacturer Resources
Ives Full Line Catalog
Product Specs
- Minimum Purchase:
- 3 units
- Subcategory:
- Stops
- Product Group:
- Door Trim and Accessories
- Package Includes:
- Fasteners for light duty masonry and wood applications
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Door Stops - Floor
- ANSI/BHMA:
- ANSI/BHMA A156.16
- Commercial/Residential:
- Commercial
- Product Model:
- FS439
- Product Dimension:
- 1-7/8" x 1-1/2" x 1-1/8"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Zinc or Stainless Steel
Ives FS439-US26D – Frequently Asked Questions
1) What is the Ives FS439 universal dome floor stop used for?
The FS439 is a floor-mounted door stop that prevents doors from swinging too far and hitting walls or furniture. The dome design provides a low profile while offering reliable door protection in commercial and residential applications.
2) Is this floor stop compatible with all door types?
The FS439 works with most standard swing doors. Verify door swing direction and clearance before installation. Check that the door bottom rail or stile will contact the stop properly without interference from weatherstripping or thresholds.
3) What finishes are available for the FS439?
Ives door stops typically come in multiple finishes to match door hardware. Common options include satin chrome, polished chrome, oil rubbed bronze, and satin nickel. Verify specific finish availability with your supplier.
4) How is the FS439 floor stop installed?
Installation requires drilling anchor holes into the floor surface. Position the stop where the door will contact it at the desired opening angle. Use appropriate fasteners for your floor material - concrete anchors for concrete, wood screws for wood subfloors.
5) What tools are needed for installation?
You'll need a drill with appropriate bits, level, pencil for marking, and fasteners suitable for your floor type. For concrete floors, use a masonry bit and concrete anchors. Have a vacuum ready to clean debris from drilled holes.
6) Can this floor stop be used on all floor surfaces?
The FS439 can be mounted on most solid floor surfaces including concrete, wood, and tile. Avoid installation on loose or flexible flooring materials. Ensure adequate structural support beneath the mounting location for secure attachment.
7) What is the height profile of this dome stop?
The dome design provides a low profile to minimize trip hazards while maintaining effectiveness. Check manufacturer specifications for exact height dimensions. The universal design balances function with safety considerations for foot traffic areas.
8) Does this floor stop require maintenance?
Minimal maintenance is required. Periodically check that mounting screws remain tight. Clean the stop surface as needed to remove dirt and debris. Inspect for wear if doors contact the stop frequently in high-traffic applications.
9) Are there code considerations for floor stop installation?
Floor stops must not obstruct required egress paths or create trip hazards. Check local building codes for accessibility requirements. In commercial applications, ensure compliance with ADA guidelines for protruding objects in walkways.
10) What are alternatives to the FS439 floor stop?
Consider wall-mounted stops, hinge pin stops, or magnetic stops depending on your application. Door hardware options include overhead stops for doors requiring different protection methods or locations with foot traffic concerns.
11) How do I determine proper placement of the floor stop?
Open the door to the desired maximum angle. Mark where the door bottom rail will contact the floor stop. Position the stop so the door contacts it cleanly without binding. Account for door swing arc and ensure clearance for normal operation.
How fast can I get the Ives FS439-US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives FS439-US26D come with a warranty?
Absolutely. The Ives FS439-US26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives FS439-US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ives FS439-US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.