Ives WS33/WS33X Heavy-Duty Wal...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$81.70
$57.95
IV_WS33-WS33X_626_SL_square

Ives WS33/WS33X Heavy-Duty Wall Door Stop with Replaceable Rubber Bumper

(No reviews yet) Write a Review

Model: IVE-WS33-US26D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$81.70
$57.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives WS33/WS33X Heavy-Duty Wall Door Stop with Replaceable Rubber Bumper

Professional Wall-Mounted Door Protection Solution

The Ives WS33/WS33X Wall Door Stop delivers reliable door and wall protection with a replaceable rubber bumper design and heavy-duty construction. This brass wall stop features a sloping design that discourages vandalism and includes offset shoulder screws that secure into the body cavity to prevent loss or theft. Available in two configurations - WS33 with fasteners for drywall/wood applications and WS33X with fasteners for heavy-duty masonry applications - this door stop meets ANSI/BHMA 156.16 standards for commercial use.

Professional Features & Benefits

  • Compact Dimensions: 2-3/8" diameter, 4" length, 2" height, and 1" width for versatile wall mounting applications.
  • Anti-Theft Design: Replaceable rubber bumper with offset shoulder screws into cavity on body prevents loss or theft while maintaining serviceability.
  • Vandal-Resistant Construction: Sloping design discourages vandalism and tampering for long-term reliability in high-traffic areas.
  • Heavy-Duty Performance: Engineered for commercial applications with brass construction and heavy-duty rating for demanding environments.
  • Dual Application Options: WS33 includes fasteners for drywall/wood mounting while WS33X provides fasteners for heavy-duty masonry applications.
  • Wall and Door Protection: Non-marring rubber bumper protects wall finishes, molding, and door surfaces from impact damage.
  • ANSI/BHMA Compliance: Meets ANSI/BHMA 156.16 standards ensuring professional-grade performance and reliability.
  • Complete Installation Package: Includes appropriate fasteners for drywall/wood or masonry applications depending on model selected.

Technical Specifications

  • ANSI/BHMA: ANSI/BHMA 156.16, L11341
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Duty Level: Heavy Duty
  • Package Includes: Fasteners for drywall/wood or masonry applications
  • Product Category: Door Trim and Accessories
  • Product Dimension: DI: 2-3/8", L: 4", H: 2", W: 1"
  • Product Group: Door Trim and Accessories
  • Product Model: WS33/WS33X
  • Product Subgroup: Door Stops, Holders, Silencers & Bumpers
  • Product Substrate: Brass
  • Product Type: Door Stops - Wall
  • Subcategory: Stops

Installation & Operation

  1. Review manufacturer specifications and verify wall construction compatibility for either drywall/wood (WS33) or masonry (WS33X) applications.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on wall surface at appropriate height to contact door edge.
  3. Prepare wall by drilling required holes per manufacturer specifications using appropriate drill bits for wall material type.
  4. Install mounting hardware using the included fasteners specific to your application - drywall/wood fasteners for WS33 or masonry fasteners for WS33X.
  5. Adjust positioning for proper alignment with door swing path ensuring the rubber bumper contacts the door at the desired stopping point.
  6. Test door operation to verify proper contact and stopping function. Make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Ives Quality?

Ives WS33/WS33X Wall Door Stops deliver professional-grade reliability with brass construction and heavy-duty rating for demanding commercial applications. Meeting ANSI/BHMA 156.16 standards, these door stops feature anti-theft design elements and vandal-resistant construction for long-term performance. Engineered for commercial environments where dependable door and wall protection is essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Subcategory:
Stops
Product Group:
Door Trim and Accessories
Duty Level:
Heavy Duty
Package Includes:
Fasteners for drywall/wood or masonry applications
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Wall
ANSI/BHMA:
ANSI/BHMA 156.16, L11341
Commercial/Residential:
Commercial
Product Model:
WS33/WS33X
Product Dimension:
DI: 2-3/8", L: 4", H: 2", W: 1"
Product Category:
Door Trim and Accessories
Product Substrate:
Brass
Department:
Door Hardware

Ives IVE-WS33-US26D – Frequently Asked Questions

1) How far off the wall does the Ives WS33 wall stop hold the door?
The WS33 body measures DI 2-3/8 inches, L 4 inches, H 2 inches, W 1 inch. Use the 4 inch length as your standoff planning number, and check it against the door's lever or panic push pad, since the stop has to catch the door before the trim hits the wall. If a lever with deep projection gets there first, you need a longer wall stop instead of this one.
2) My lever handle hits the wall before this stop reaches the door. What do I use?
You need more standoff than the Ives WS33 gives you. Its body is 4 inches long, fixed, with no length options. For deeper projection, the ABH RM Series and ABH RMS Series wall stops are sold in multiple length options, so you can pick a length that catches the door ahead of the lever. That is the fix on openings with heavy lever trim or a panic device push pad.
3) Is the Ives WS33 wall stop rated for a school or hospital corridor?
Yes. The WS33 is a commercial, heavy-duty wall stop that meets ANSI/BHMA 156.16 under function number L11341, which is the wall stop line in that standard. Brass body, sloped face that discourages someone prying at it, and offset shoulder screws that go into a cavity in the body so the bumper is not walked off. That's the spec profile a facility standardizing corridor stops is looking for.
4) What is the closest equivalent to the Ives WS33 wall door stop from another brand?
The nearest equivalent wall-mounted bumper is the Emtek 2255 brass wall bumper, which shares the brass construction of the WS33 and mounts to the wall with a rosette. The Ives WS33 is a heavy-duty commercial wall stop with a replaceable rubber bumper and a 2-3/8 inch diameter, 4 inch length, 2 inch height and 1 inch width, and it carries ANSI/BHMA 156.16, L11341. The Emtek 2255 is described as a brass wall bumper with a regular rosette. Both stop the door at the wall; the Ives unit is the one specified where a commercial ANSI/BHMA reference is called for.
5) What should I use instead of the Ives WS33 when the door does not reach a wall?
The Ives WS33 and WS33X are wall stops - the body fastens to the wall and the rubber bumper takes the door face, so the swing has to end at a wall within reach. When the door opens into open floor or a corridor with nothing behind it, a door-mounted stop is the other approach: the Delaney 3 inch HD rigid door stop and the Delaney 3 inch spring door stop both project from the door or base rather than the wall surface. Match the projection to the gap you actually have between the door in the open position and whatever it would otherwise strike.
6) The wall is too far from the door swing for a standard wall stop - is there a longer alternative to the Ives WS33?
The Ives WS33 body is 4 inches long with a 2-3/8 inch diameter, which fixes how far the bumper stands off the wall. When the door needs to be caught further out - a deep base, a thick wall covering, or a swing that stops short of the wall face - the ABH RM Series and ABH RMS Series wall door stops are offered with multiple length options, so the projection can be picked to suit the opening. Measure from the finished wall to the point on the door face that will contact the bumper before selecting a length.
7) When the rubber bumper on a wall stop wears out, do I have to replace the whole thing?
Not on the Ives WS33. The rubber bumper is replaceable, held by offset shoulder screws that seat into a cavity in the body, so you swap the bumper and leave the brass base and its wall anchors alone. That matters for a property manager carrying a fleet of doors: one bumper part number covers the wear item across every opening, and nobody is re-drilling walls.
8) Wall stop or floor stop, which one should I be using?
A wall stop like the Ives WS33 only works when the door swings into a wall within reach of its 4 inch body. If the door opens into open space, into a wider gap, or into a partition you cannot anchor to, a wall stop has nothing to land on and you want a floor stop or a hinge-pin type instead. Where there is solid wall behind the strike point, the wall stop is the better call because it takes the impact into the wall structure rather than into a floor anchor people trip over.
9) What else does ZenSupply carry if the Ives WS33 is more stop than I need?
For lighter residential-grade work there's the Delaney 2-1/4 inch concave wall bumper and the Emtek 2255 brass wall bumper with regular rosette, both simple wall bumpers rather than heavy-duty commercial stops. Delaney also does a 3 inch spring door stop and a 3 inch HD rigid door stop, which are baseboard-mounted rather than wall-face types. The Ives WS33 is the one carrying the commercial heavy-duty rating and ANSI/BHMA 156.16.
10) Will a wall stop hold a door open, or is it just a bumper?
The WS33 is a stop, not a holder. It arrests the door swing and protects the wall and the door face with a non-marring rubber bumper; it has no catch or magnet, so the door swings back freely. If you need the door to stay open, you want a hold-open device, not this.
11) Is a concave wall bumper the same thing as the Ives WS33?
No. The Delaney 2-1/4 inch concave wall bumper is a low-profile bumper that sits nearly flush to the wall and takes a knob or door face at short range. The Ives WS33 is a heavy-duty commercial wall stop 4 inches long and 2 inches high with a replaceable rubber bumper and offset shoulder screws that thread into a cavity in the body to resist loss or theft, and a sloping body that discourages tampering. Use the flush bumper where the door lands right against the wall and there is nothing to defeat; use the WS33 where the stop has to project and stay serviceable in traffic.
12) I am replacing an old wall stop and there is a hole left in the drywall - do I need a cover plate or does the Ives WS33 handle it?
Those are two different parts. The Delaney 2-1/8 inch hole plate metal cover is a blank cover that conceals an existing 2-1/8 inch opening; it stops nothing. The Ives WS33 is the working stop, with a 2-3/8 inch diameter body and a replaceable rubber bumper, and it ships with fasteners for drywall or wood while the WS33X ships with fasteners for heavy-duty masonry. If the old fastener holes fall outside the WS33 footprint, the cover plate is a separate item that hides them - it is not a substitute for the stop.
13) Which wall stop should I standardize on across a facility with both drywall and block walls?
The Ives WS33 and WS33X cover both substrates under one model: the WS33 comes with fasteners for drywall and wood, the WS33X with fasteners for heavy-duty masonry, and both are the same heavy-duty brass body carrying ANSI/BHMA 156.16, L11341, so the visible hardware matches across the building. Where a specific opening needs a different projection, the ABH RM Series and RMS Series wall door stops are offered in multiple lengths. Keeping the replaceable-bumper WS33 as the standard means one spare bumper stocked for the whole facility.
14) Where do I mount the WS33 on the wall, at the baseboard or up higher?
Mount it at the height where the bumper meets the door face, not at the floor. Ives supplies a template to mark the holes, and the sequence is: verify the wall type first (drywall or wood for the WS33, masonry for the WS33X), mark from the template, drill for that wall material, fasten, then swing the door and confirm the bumper lands where you want the door to stop. On a door with a lever, the usual target is a point on the door face clear of the trim so the rubber, not the handle, takes the hit.
15) What is the difference between a spring door stop and the Ives WS33 rigid wall stop?
The Delaney 3 inch spring door stop uses a flexible spring shaft that gives when the door strikes it, while the Ives WS33 is a rigid heavy-duty wall stop that holds the door at a fixed point on a replaceable rubber bumper. The Delaney 3 inch HD rigid door stop is the rigid version of that same mounting approach. A spring stop absorbs the swing and returns; the WS33 body is brass with a sloping profile and shoulder screws set into the body cavity, built for openings where the stop is taking repeated commercial traffic and needs to stay put.
How fast can I get the Ives IVE-WS33-US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives IVE-WS33-US26D come with a warranty?
Absolutely. The Ives IVE-WS33-US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives IVE-WS33-US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives IVE-WS33-US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!