Kaba Ilco 863V-00-10 Cylinder ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.50
$1.75
Kaba Ilco 863V-00-10 Cylinder Part, Falcon/Saflok Cam, #23

Kaba Ilco 863V-00-10 Cylinder Cam, #23 Profile for Falcon/Saflok Mortise Locks

(No reviews yet) Write a Review

Model: 863V-00-10

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.50
$1.75
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Kaba Ilco 863V-00-10 Cylinder Cam, #23 Profile for Falcon/Saflok Mortise Locks

Kaba Ilco 863V-00-10 Cylinder Cam, #23 Profile for Falcon/Saflok Mortise Locks is a replacement cylinder cam engineered for Falcon and Saflok mortise lock cylinders, featuring the #23 cam profile for accurate retrofit compatibility. Built as a genuine Kaba Ilco cylinder part, this commercial-grade cam restores proper cam actuation without requiring a full cylinder replacement. It is designed for locksmiths, distributors, and facility maintenance teams servicing Falcon and Saflok mortise lock systems in commercial door hardware applications. As a dedicated replacement component rather than a full cylinder assembly, this cam simplifies field servicing and helps distributors and locksmiths maintain efficient parts inventory for ongoing mortise lock maintenance.

Key Features

  • #23 Cam Profile: Precision engineered cam design intended for accurate fit and function within compatible mortise lock cylinders.
  • Falcon/Saflok Compatibility: Manufactured for use with Falcon and Saflok mortise cylinder applications, simplifying cam replacement without swapping the entire cylinder.
  • Mortise Lock Application: Purpose built for mortise lock cylinder mechanisms commonly found in commercial door hardware.
  • Commercial-Grade Component: Suited to the demands of commercial building environments where reliable cylinder cam function is required.
  • Genuine Kaba Ilco Part: Sourced from the Kaba Ilco cylinder parts line for a factory matched replacement fit.
  • Simplified Servicing: Allows locksmiths and maintenance staff to restore mortise cylinder cam function quickly during routine hardware upkeep, reducing labor time versus full cylinder replacement.
  • Replacement Parts Category: Classified as a dedicated replacement part, making it easy for locksmiths to stock and order as a discrete service component.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities

Why Kaba Ilco 863V?

Kaba Ilco engineers the 863V-00-10 as a precise, application-specific replacement cam for Falcon and Saflok mortise cylinder servicing. This #23 profile component helps commercial locksmiths and maintenance teams keep mortise lock hardware operating reliably without the cost of unnecessary full-cylinder replacement, reducing the need for complete cylinder swaps during routine door hardware maintenance. Stocking genuine replacement cams like this one supports faster turnaround on service calls and helps ensure continued smooth operation of existing Falcon and Saflok mortise lock installations.

Product Specs

Product Group:
Parts and Accessories
Product Subgroup:
Cylinders
Product Type:
Cylinders
Subcategory:
Cylinders
Commercial/Residential:
Commercial
Lock Type:
Mortise
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Category:
Parts and Accessories
Department:
Door Hardware

Kaba Ilco 863V-00-10 – Frequently Asked Questions

1) What exactly is the Kaba Ilco 863V-00-10, a cylinder or just the cam?
It's the cam only, not a cylinder. The 863V-00-10 is a replacement cylinder cam with the #23 profile, sold as a discrete service part so you can restore cam actuation on a Falcon or Saflok mortise cylinder without buying a whole new cylinder. If you need a complete cylinder, look at a mortise cylinder such as the Corbin Russwin 1000 Series 1-1/2 inch with the A02 straight cam instead.
2) Will the #23 cam fit my Falcon mortise lock cylinder?
The #23 cam is made for Falcon and Saflok mortise cylinder applications, so it's the factory-matched profile for those cylinders. Cams are not universal between brands, though. A Corbin Russwin mortise housing takes its own cam, an A01 cloverleaf on the 1070, and a Schlage L9000 mortise takes the A01 Schlage L cam used on the 1080. Confirm the cylinder you're servicing is Falcon or Saflok before you pull it apart.
3) Can I use this cam on a rim cylinder or a key-in-lever cylinder?
No. The 863V-00-10 is a mortise cam. Rim cylinders drive a tailpiece, not a cam, so a rim application needs something like the Schlage 20-021 with a vertical tailpiece or the 20-022 with a horizontal tailpiece. Key-in-lever is different again, the Falcon A23161-05 G is that style for RU/T Series levers.
4) If the whole Falcon mortise cylinder is worn out rather than just the cam, what complete mortise cylinder can be used instead?
The Kaba Ilco 863V-00-10 is only the #23 cam for Falcon and Saflok mortise cylinders, so it does nothing for a cylinder whose plug or pins are worn. For a full replacement, the Corbin Russwin 1000 Grade 1 mortise cylinder is 1-1/2 inch length with an A02 straight cam, and the Corbin Russwin 1070 Grade 1 housing is a 1-1/4 inch 6-pin mortise housing with an A01 cloverleaf cam. Adams Rite also offers the 4036 mortise cylinder, a Grade 1 five-pin unit in the 4036 Series. Match the cam profile of the new cylinder to what the lock case expects before ordering.
5) What should I order instead of the Kaba Ilco 863V cam for an aluminum storefront door?
The 863V-00-10 cam suits Falcon and Saflok mortise cylinders in mortise lock cases, not narrow stile storefront deadlocks. For Adams Rite MS1847 deadlock and deadlatch systems, the Adams Rite 4024 cylinder pull mounts with a trim plate and the 4025 is a five-pin tumbler cylinder pull with through-screws. The Adams Rite 4026 five-pin cylinder pull is the wood door version, intended for the Adams Rite 5017 wood door deadlock and deadlatch.
6) My Falcon lock is a key-in-lever, not a mortise lock. Is the 863V-00-10 the right part?
No. The Kaba Ilco 863V-00-10 is a cam for mortise cylinders in Falcon and Saflok mortise locks. For Falcon key-in-lever hardware, the Falcon A23161-05 G is a key in lever cylinder for the RU/T series with a 6-pin G keyway, keyed different and supplied with two cut keys. Confirm the lock is a mortise case with a threaded cylinder before ordering a cam.
7) My Saflok mortise cylinder turns but the lock doesn't retract, do I need a new cylinder?
Often not. If the key turns freely but the lock body isn't being driven, the cam is the usual failure point, and on Falcon and Saflok mortise cylinders the #23 cam is the replacement. Swapping the cam restores actuation and saves rekeying and reinstalling a full cylinder. If the plug itself is worn or the keying has to change, then you're into a complete cylinder.
8) If I'm standardizing mortise cylinders across a building instead of repairing them, what should I be looking at?
The 863V cam is a repair part, not a standardization path. To standardize, you'd spec complete mortise cylinders or an interchangeable core system: Corbin Russwin 1000 Grade 1 mortise cylinders, the 1080 LFIC 1-1/2 inch 6-pin for Schlage L9000 locks, or a BEST interchangeable core program such as the 1CB 150 Series, with 1C 5-pin standard cores for lower-security openings. Keep a few #23 cams on the shelf for the Falcon and Saflok openings you aren't converting.
9) Will a Schlage 20-021 or 20-022 cam work in place of the Kaba Ilco 863V-00-10?
No. The Schlage 20-021 and 20-022 are complete 6-pin rim cylinders, supplied with two keys and differing from each other by tailpiece cam orientation, vertical on the 20-021 and horizontal on the 20-022. Rim cylinders mount on the face of the door and drive a rim device through a tailpiece. The Kaba Ilco 863V-00-10 is a loose cam part for mortise cylinders used in Falcon and Saflok locks, so the two are not interchangeable in either direction.
10) For a facility that wants to stop swapping cams and key everything to one system, what is the alternative to the Kaba Ilco 863V cam?
An interchangeable core platform removes the cam-matching exercise from most service calls. BEST offers the 1C Series standard 5-pin cylinder core, the Peaks 1CB 150 Series interchangeable core cylinder, and the 1CDF drill-resistant patented 7-pin brass 150 Series core. Schlage offers the 20-057 6-pin FSIC rim cylinder with a convertible tailpiece cam and the 20-057-C full size interchangeable core in C keyway, 643E aged bronze. The Kaba Ilco 863V-00-10 remains the correct choice when the goal is to keep the existing Falcon or Saflok mortise cylinders in service and only restore cam actuation.
11) Is the Corbin Russwin 1080 a substitute for the Kaba Ilco 863V cam on a Schlage L9000 mortise lock?
They serve different jobs. The Corbin Russwin 1080 Grade 1 is a complete 1-1/2 inch 6-pin LFIC mortise cylinder built for Schlage L9000 mortise locks with an A01 cloverleaf cam. The Kaba Ilco 863V-00-10 is a #23 cam only, made for Falcon and Saflok mortise cylinder applications. On a Schlage L9000 opening the 1080 is the cylinder to look at; the 863V is the part you order when an existing Falcon or Saflok cylinder needs its cam restored.
12) Can I use a Detex MC65 mortise cylinder on a Falcon or Saflok mortise lock instead of replacing the cam?
The Detex MC65 is a commercial grade 1-1/8 inch 6-pin mortise cylinder in the Schlage C keyway, so it is a candidate only where the opening can move to that keyway and the lock case accepts the cam supplied with it. The Kaba Ilco 863V-00-10 keeps the existing Falcon or Saflok cylinder and keying in place and simply restores the #23 cam, which avoids rekeying the opening.
13) Is the Ilco 863V-00-10 cam suitable for commercial buildings or is it a residential part?
Commercial. It's specified for commercial door hardware, and the typical uses are offices, schools, healthcare, retail, multi-tenant residential, government buildings and warehouses, all places running mortise locks on high-traffic openings.
14) Is this a genuine Kaba Ilco part or an aftermarket cam?
Genuine. The 863V-00-10 comes from the Kaba Ilco cylinder parts line, so the #23 profile is a factory-matched fit rather than a generic cam blank.
15) What is the difference between the Kaba Ilco 863V cam and rim cylinder tailpieces like the Corbin Russwin 3070?
A cam and a tailpiece drive different hardware. The Kaba Ilco 863V-00-10 #23 cam rotates inside a mortise lock case to throw the lock mechanism. The Corbin Russwin 3070 is a 6-pin rim cylinder housing with a 1-7/8 inch tailpiece, and Medeco offers rim-type lazy motion cylinders such as the 1012040 6-pin for Kwikset single cylinder deadbolts, the 1065244 5-pin with an Emtek tailpiece, and the 1075127 5-pin for handlesets and deadbolts. Those tailpiece parts pass through the door to a separate body and will not seat in a mortise cylinder.
16) Is there a non-keyed or residential equivalent to the Kaba Ilco 863V cam?
The 863V-00-10 is a commercial cylinder part for mortise locks and has no residential counterpart in the same role. If the opening calls for something else, the BEST 12E Series dummy rim cylinder is a non-keyed unit with a 1-5/32 inch diameter, the Emtek CY4 is a cylinder sold each from the Emtek parts line, and the Medeco 1065140 is a 5-pin retrofit cylinder for Arrow JL interconnected locks and Emtek handleset and deadbolt outside cylinders.
How fast can I get the Kaba Ilco 863V-00-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Kaba Ilco 863V-00-10 come with a warranty?
Absolutely. The Kaba Ilco 863V-00-10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Kaba Ilco 863V-00-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Kaba Ilco 863V-00-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!