You may also like
Keedex K-BXES7 Weldable Electric Strike Box Folger Adam 310-2 3/4
Type:
- Electric Strike
Dimensions:
- 2 5/8 ”W x 9 1/4”H x 2”D
Materials Available:
- 10 Gauge Steel
Product Downloads:
Manufacturer Resources
Product Specs
- Series:
- K-BXES7
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Gate Boxes
- Product Type:
- Electric Strike Boxes
- Subcategory:
- Gate Boxes
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Lock Type:
- Electric Strike
- Product Dimension:
- 2 5/8" W x 9 1/4" H x 2" D
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- 10 Gauge Steel
- Department:
- Door Hardware
Keedex K-BXES7 – Frequently Asked Questions
1) What electric strike does the Keedex K-BXES7 weld-in box fit?
The K-BXES7 is cut for the Folger Adam 310-2 3/4 electric strike. It gives that strike a finished pocket in a hollow metal frame or a fabricated gate frame so the strike body and wiring sit behind the face of the frame.
2) What are the cutout dimensions I need for the Keedex K-BXES7 strike box?
The box measures 2-5/8 x 9-1/4 x 2 inches (W x H x D), so the frame opening has to accept a 2-5/8 inch wide by 9-1/4 inch tall box with 2 inches of clear depth behind the frame face. On a hollow metal jamb, check the depth first, shallow frames and frames with grout or anchors in the way are the usual reason a weld-in box will not seat.
3) Is the Keedex K-BXES7 welded in or screwed in?
It is a weldable box. The 10 gauge steel body is meant to be welded into the frame or gate post, not fastened with screws, so plan on a fabricator or a field welder rather than a drill and tap.
4) I have a different brand of electric strike, will the K-BXES7 work?
Only if your strike matches the Folger Adam 310-2 3/4 footprint. Keedex cuts each box model to a specific strike, and the 2-5/8 by 9-1/4 inch face on this one will not accept a strike with a different faceplate size or cutout. Match the box to the strike model you are actually installing.
5) Can I use this Keedex strike box on an exterior gate?
Yes. The K-BXES7 is a weld-in 10 gauge steel housing, and Keedex builds these for gate and frame fabrication where there is no factory strike prep. It ships as bare steel, so on an outdoor gate prime and finish it after welding.
6) Do I need to run wire to the Keedex K-BXES7?
Yes, because it houses a powered device. The strike it carries is electric, so the opening needs low voltage wiring from a power supply into the frame or gate post before the box gets welded in. Pull and dress the wire first, welding after the fact with the strike and conductors already in place is how insulation gets cooked.
7) Is this Keedex strike box rated for commercial use?
It is a commercial item. The 10 gauge steel body is heavier than what you would find on a residential frame filler, which is why it takes weld heat and gate service without deforming.
How fast can I get the Keedex K-BXES7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Keedex K-BXES7 come with a warranty?
Absolutely. The Keedex K-BXES7 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Keedex K-BXES7?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Keedex K-BXES7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.