You may also like
Kindorf B928 Deep U-Support Connector, Galvanized Steel, 4-7/16" Length, Pack of 100
Model: KDF-B928
Kindorf B928 Deep U-Support Connector, Galvanized Steel, 4-7/16" LengthThe Kindorf B928 is a deep U-support connector engineered for demanding electrical and mechanical support applications where...
Kindorf
$838.57
Kindorf B929 Wide U-Support Channel Connector, Steel
The Kindorf B929 is a wide U-support connector engineered for use with steel strut and channel support systems in commercial and industrial electrical installations. Built from galvanized steel, this connector measures 6-1/4" in length with a 1-1/2" width, providing a wide bearing surface for securing conduit, cable tray, pipe, and equipment runs to Kindorf channel. The galvanized finish delivers corrosion resistance for long-term reliability in both indoor and outdoor support applications. As part of the Kindorf line of channel fittings and accessories, the B929 is designed to integrate seamlessly with standard strut channel systems used throughout commercial, industrial, and institutional electrical infrastructure.
Key Features
- Dimensions: 6-1/4" length by 1-1/2" width, sized for wide-span support applications across standard strut channel systems.
- Durable Construction: Fabricated from galvanized steel for strength and corrosion resistance in demanding electrical support environments.
- Wide U-Support Design: The wide U-shaped profile provides a broad, stable bearing surface for securing conduit runs, cable tray, and equipment to channel systems.
- Finish: Galvanized coating helps resist rust and corrosion, extending service life in both indoor and outdoor installations.
- Channel-Compatible: Designed to work with standard steel strut channel support systems commonly used in electrical and mechanical installations.
- Steel Build: Solid steel construction provides the mechanical strength needed to support heavier loads across wider spans.
Technical Specifications
- Product Type: U-Support Connector
- Material: Galvanized Steel
- Length: 6-1/4"
- Width: 1-1/2"
- Finish: Galvanized
Typical Applications
- Commercial and Industrial Electrical Support Systems
- Strut Channel and Conduit Support Installations
- Cable Tray and Pipe Support Applications
- Renovation and New Construction Electrical Work
- Outdoor and Indoor Mounting Systems
Why Kindorf?
Kindorf channel and support fittings are built from galvanized steel to deliver dependable strength and corrosion resistance for professional electrical support systems. The B929 wide U-support connector reflects that same commitment to durable construction, offering electricians and contractors a reliable component for securing conduit, cable tray, and equipment to strut channel across commercial and industrial projects.
Manufacturer Resources
Product Specs
- list_batch:
- KDF-20260924
- Product Type:
- Strut & Strut Fitting
- Product Finish:
- Galvanized
- Configuration:
- Wide U-Support
- Department:
- Electrical
- Product Subgroup:
- Hangers, Straps & Supports
- Product Material:
- Galvanized Steel
- Pack size (unit):
- 100
- Product Group:
- Hangers, Supports & Fasteners
- Country Of Origin:
- United States
Kindorf B929 – Frequently Asked Questions
1) How many Kindorf B929 U-supports come in a pack?
The B929 wide U-support ships 100 pieces to a pack. That is the ordering unit, so a job needing a dozen hangers still buys the box of 100 - worth knowing if you are pulling for a small conduit run versus stocking a shop truck.
2) What size is the Kindorf B929 wide U-support connector?
It measures 6-1/4 inches in length by 1-1/2 inches in width. The 1-1/2 inch width matches the bearing face of standard steel strut channel, and the 6-1/4 inch length is what gives it the span to bridge a wide support rather than clamp a single small conduit.
3) Will the Kindorf B929 fit standard strut channel, or only Kindorf channel?
The B929 is built to work with standard steel strut channel support systems, the same channel used throughout commercial and industrial electrical and mechanical work, not just Kindorf-branded runs. Check that your channel presents the usual 1-1/2 inch face, since that is the width the connector is sized to.
4) Can the Kindorf B929 be used outdoors or in a damp mechanical room?
Yes. The B929 is galvanized steel, and the zinc coating is what carries it through outdoor and indoor installations where plain steel would rust. For heavy chemical exposure or coastal salt air, most contractors step up to stainless hardware instead.
5) What does a wide U-support connector actually do on a strut channel run?
It is the U-shaped saddle that clamps a run of conduit, pipe, cable tray, or equipment down onto strut channel. The wide profile spreads the bearing surface over a broader footprint than a standard conduit clamp, so it is what you reach for on heavier loads or wider spans. If you only need to hold one trade-size EMT run, a single-conduit strut clamp is the simpler fitting.
6) Is the B929 strong enough for cable tray, or just conduit?
Solid galvanized steel construction is what lets it carry cable tray and heavier equipment, not just conduit. The wide U profile is specifically the heavier-duty option in the Kindorf fitting line for broad-span tray and pipe support. Load ratings for a given span come from the channel and the structure it is anchored to, so size those from your engineer's detail.
7) What is the Kindorf part number for the wide U-support?
B929 is the Kindorf manufacturer part number for the wide U-support connector in galvanized steel. Give that number when matching existing fittings on a building, since the narrow and wide U-supports in the line look similar once installed.
How fast can I get the Kindorf B929 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Kindorf B929 come with a warranty?
Absolutely. The Kindorf B929 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Kindorf B929?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Kindorf B929 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.